Date: Thu, 11 Dec 1997 21:17:42 -0500 (EST) From: Jim Riffle <rif@rif.hoosierlink.net> To: freebsd-scsi@freebsd.org Subject: possiable quirk with CTT8000-S Tape Drive Message-ID: <Pine.BSF.3.96.971211205834.610A-100000@rif.hoosierlink.net>
next in thread | raw e-mail | index | archive | help
I have been attempting to get Amanda working with a CTT8000-Scsi tape drive, and may have stumbled on a quirk, or perhaps just a bug with Amanda. I have the following SCSI devices in my box. aic0 at 0x340-0x35f irq 9 on isa (aic0:0:0): "CONNER CTT8000-S 1.17" type 1 removable SCSI 2 st0(aic0:0:0): Sequential-Access density code 0x45, drive empty (aic0:2:0): "HP HP35470A T503" type 1 removable SCSI 2 st1(aic0:2:0): Sequential-Access density code 0x13, variable blocks, write-enabled Running amanda gives one of these 2 errors. st0(aic0:0:0): ILLEGAL REQUEST asc:80,81 Vendor Specific ASC st0(aic0:0:0): BLANK CHECK req sz: 32768 (decimal) asc:0,5 End-of-data detected If I run amanda on st1 (The HP tape), It works okay, so it appears to just be the Conner which has the trouble. If I run a simple "dump" command, on sd0, it works okay, which may mean this is a bug with Amanda instead.. I compiled SCSIDEBUG into my kernel, and get the following output with a debug level of 7, while running amanda. At the end there, I set the debug level back to 0, so there is extra stuff at the end. If anyone had any thoughts of things for me to try, I would apprecaite it greatly. st0(aic0:0:0): stclose: Closing device st0(aic0:0:0): scsi_cmd st0(aic0:0:0): get_xs st0(aic0:0:0): returning xs(0xf093ca00): flg(0x60)sc_link(0xf093ca80)retr(0x2)timo(0x186a0)cmd(0xf093ca58)len(0x6)data(0x0)len(0x0)res(0x0)err(0x0)bp(0x0)st0(aic0:0:0): command: 0,0,0,0,0,0-[0 bytes] st0(aic0:0:0): scsi_done st0(aic0:0:0): command: 0,0,0,0,0,0-[0 bytes] st0(aic0:0:0): back in cmd() st0(aic0:0:0): sc_err1,err = 0x0 st0(aic0:0:0): free_xs st0(aic0:0:0): calling private start() st0(aic0:0:0): ststart st0(aic0:0:0): scsi_cmd st0(aic0:0:0): get_xs st0(aic0:0:0): returning xs(0xf093ca00): flg(0x20)sc_link(0xf093ca80)retr(0x2)timo(0x186a0)cmd(0xf093ca58)len(0x6)data(0x0)len(0x0)res(0x0)err(0x0)bp(0x0)st0(aic0:0:0): command: 0,0,0,0,0,0-[0 bytes] st0(aic0:0:0): scsi_done st0(aic0:0:0): command: 0,0,0,0,0,0-[0 bytes] st0(aic0:0:0): back in cmd() st0(aic0:0:0): sc_err1,err = 0x0 st0(aic0:0:0): free_xs st0(aic0:0:0): calling private start() st0(aic0:0:0): ststart st0(aic0:0:0): scsi_cmd st0(aic0:0:0): get_xs st0(aic0:0:0): returning xs(0xf093ca00): flg(0xe0)sc_link(0xf093ca80)retr(0x2)timo(0x1388)cmd(0xf093ca58)len(0x6)data(0x0)len(0x0)res(0x0)err(0x0)bp(0x0)st0(aic0:0:0): command: 1e,0,0,0,1,0-[0 bytes] st0(aic0:0:0): scsi_done st0(aic0:0:0): command: 1e,0,0,0,1,0-[0 bytes] st0(aic0:0:0): back in cmd() st0(aic0:0:0): sc_err1,err = 0x0 st0(aic0:0:0): free_xs st0(aic0:0:0): calling private start() st0(aic0:0:0): ststart st0(aic0:0:0): Open complete st0(aic0:0:0): stopen: dev=0xe01 (unit 0) result 0 st0(aic0:0:0): [ioctl: op=0x5 count=0xefbfd7e4] st0(aic0:0:0): scsi_cmd st0(aic0:0:0): get_xs st0(aic0:0:0): returning xs(0xf093ca00): flg(0x20)sc_link(0xf093ca80)retr(0x4)timo(0x493e0)cmd(0xf093ca58)len(0x6)data(0x0)len(0x0)res(0x0)err(0x0)bp(0x0)st0(aic0:0:0): command: 1,0,0,0,0,0-[0 bytes] st0(aic0:0:0): scsi_done st0(aic0:0:0): command: 1,0,0,0,0,0-[0 bytes] st0(aic0:0:0): back in cmd() st0(aic0:0:0): sc_err1,err = 0x0 st0(aic0:0:0): free_xs st0(aic0:0:0): calling private start() st0(aic0:0:0): ststart st0(aic0:0:0): ststrategy st0(aic0:0:0): 32768 bytes @ blk0 st0(aic0:0:0): ststart st0(aic0:0:0): scsi_cmd st0(aic0:0:0): get_xs st0(aic0:0:0): returning xs(0xf093ca00): flg(0x420)sc_link(0xf093ca80)retr(0x0)timo(0x186a0)cmd(0xf093ca58)len(0x6)data(0xf46af7e4)len(0x8000)res(0x0)err(0x0)bp(0xf2d0dff4)st0(aic0:0:0): command: 8,0,0,80,0,0-[32768 bytes] ------------------------------ 000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 016: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 032: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 048: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ------------------------------ st0(aic0:0:0): scsi_done st0(aic0:0:0): command: 8,0,0,80,0,0-[32768 bytes] ------------------------------ 000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 016: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 032: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 048: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ------------------------------ st0(aic0:0:0): sc_err1,err = 0x1 code70 valid1 seg0 key8 ili0 eom0 fmark0 info: 0 0 80 0 followed by 10 extra bytes extra: 0 0 0 0 0 0 0 0 0 0 st0(aic0:0:0): calling private err_handler() st0(aic0:0:0): private err_handler() returned -1 st0(aic0:0:0): BLANK CHECK req sz: 32768 (decimal) asc:0,5 End-of-data detected st0(aic0:0:0): free_xs st0(aic0:0:0): calling private start() st0(aic0:0:0): ststart st0(aic0:0:0): stclose: Closing device st0(aic0:0:0): scsi_cmd st0(aic0:0:0): get_xs st0(aic0:0:0): returning xs(0xf093ca00): flg(0x60)sc_link(0xf093ca80)retr(0x2)timo(0x1388)cmd(0xf093ca58)len(0x6)data(0x0)len(0x0)res(0x0)err(0x0)bp(0x0)st0(aic0:0:0): command: 1e,0,0,0,0,0-[0 bytes] st0(aic0:0:0): scsi_done st0(aic0:0:0): command: 1e,0,0,0,0,0-[0 bytes] st0(aic0:0:0): back in cmd() st0(aic0:0:0): sc_err1,err = 0x0 st0(aic0:0:0): free_xs st0(aic0:0:0): calling private start() st0(aic0:0:0): ststart st0(aic0:0:0): scsi_cmd st0(aic0:0:0): get_xs st0(aic0:0:0): returning xs(0xf093ca00): flg(0x60)sc_link(0xf093ca80)retr(0x2)timo(0x186a0)cmd(0xf093ca58)len(0x6)data(0x0)len(0x0)res(0x0)err(0x0)bp(0x0)st0(aic0:0:0): command: 0,0,0,0,0,0-[0 bytes] st0(aic0:0:0): scsi_done st0(aic0:0:0): command: 0,0,0,0,0,0-[0 bytes] st0(aic0:0:0): back in cmd() st0(aic0:0:0): sc_err1,err = 0x0 st0(aic0:0:0): free_xs st0(aic0:0:0): calling private start() st0(aic0:0:0): ststart st0(aic0:0:0): stopen: dev=0x20000e00 (unit 0) result 0 st0(aic0:0:0): scsi_do_ioctl(0x80045102) st0(aic0:0:0): debug set to 0 st0(aic0:0:0): BLANK CHECK req sz: 32768 (decimal) asc:0,5 End-of-data detected Thanks, Jim --- Jim Riffle rif@hoosierlink.net HoosierLink & KC Online Network/Systems Administrator http://rif.kconline.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.971211205834.610A-100000>