Date: Tue, 25 Sep 2001 18:03:42 +0200 From: jonas <jonas.bulow@servicefactory.se> To: freebsd-questions@freebsd.org Subject: FreeBSD 4.4-STABLE, Promise Fasttrak100 TX4, ata problem Message-ID: <3BB0AADE.DF6A3751@servicefactory.se>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------C4F700E2DC41F16109B380B9 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, I'm trying to use a Promise FastTrak 100 TX4 together with an onboard IDE controller on a SuperMicro P6DGU motherboard. The machine hangs during boot if I have disks attached to the promise controler. The machine will boot if I remove the disks from the promise controler. I have tried zilions of different settings in the BIOS setup and I have tried to move around the promise controler in different PCI slots. Still hanging while booting... An output of "boot -v" is appended below. In this case the disks (there are two of them) are detached from the promise controller. By adding the two disks to the promise controler the computer will hang *before* the line saying: ata0-master: success setting UDMA2 on Intel chip I suggestions on how to solve this? regards, jonas --------------C4F700E2DC41F16109B380B9 Content-Type: text/plain; charset=us-ascii; name="boot.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="boot.txt" Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-STABLE #2: Tue Sep 25 16:47:06 CEST 2001 root@boxen.servicefactory.se:/usr/obj/usr/src/sys/BOXEN Calibrating clock(s) ... TSC clock: 451095081 Hz, i8254 clock: 1193374 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 451025806 Hz CPU: Pentium II/Pentium II Xeon/Celeron (451.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 536739840 (524160K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00343000 - 0x1ffd7fff, 533286912 bytes (130197 pages) avail memory = 519331840 (507160K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fdb50 bios32: Entry = 0xfdb60 (c00fdb60) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xdb81 pnpbios: Found PnP BIOS data at 0xc00f7140 pnpbios: Entry = f0000:6a94 Rev = 1.0 Other BIOS signatures found: ACPI: 000fb2d0 Preloaded elf kernel "kernel" at 0xc031d000. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71a08086) pcib-: pcib0 exists, using next available unit number npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443GX host to PCI bridge> on motherboard found-> vendor=0x8086, dev=0x71a0, revid=0x00 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f0000000, size 26 found-> vendor=0x8086, dev=0x71a1, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000ffa0, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=255 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 00000440, size 4 found-> vendor=0x1011, dev=0x0022, revid=0x06 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=2 secondarybus=2 found-> vendor=0x9005, dev=0x001f, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000e800, size 8 map[14]: type 1, range 64, base febff000, size 12 found-> vendor=0x10b7, dev=0x9055, revid=0x64 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=7 map[10]: type 1, range 32, base 0000ec00, size 7 map[14]: type 1, range 32, base febfef80, size 7 pci0: <PCI bus> on pcib0 pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x5333, dev=0x8904, revid=0x01 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base f8000000, size 26 pci1: <PCI bus> on pcib2 pci1: <S3 Trio3D graphics accelerator> (vendor=0x5333, dev=0x8904) at 0.0 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI probe a=00 b=00 ata0-slave: ATAPI probe a=00 b=00 ata0: mask=03 status0=50 status1=00 ata0-master: ATA probe a=01 b=a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8 ata1: mask=03 status0=50 status1=00 ata1: mask=03 ostat0=50 ostat2=00 ata1-slave: ATAPI probe a=00 b=00 ata1-master: ATAPI probe a=14 b=eb ata1: mask=03 status0=00 status1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2 chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on pci0 pcib3: <DEC 21150 PCI-PCI bridge> at device 13.0 on pci0 found-> vendor=0x105a, dev=0x6268, revid=0x02 class=01-04-85, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=7 map[10]: type 1, range 32, base 0000dff0, size 3 map[14]: type 1, range 32, base 0000dfe4, size 2 map[18]: type 3, range 32, base 0000dfa8, size 3 map[1c]: type 1, range 32, base 0000dfe0, size 2 map[20]: type 1, range 32, base 0000df90, size 4 map[24]: type 1, range 32, base feaf0000, size 16 found-> vendor=0x105a, dev=0x6268, revid=0x02 class=01-04-85, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000dfa0, size 3 map[14]: type 3, range 32, base 0000df8c, size 2 map[18]: type 1, range 32, base 0000df80, size 3 map[1c]: type 3, range 32, base 0000df88, size 2 map[20]: type 1, range 32, base 0000df60, size 4 map[24]: type 1, range 32, base fead0000, size 16 pci2: <PCI bus> on pcib3 atapci1: <Promise TX2 ATA100 controller> port 0xdf90-0xdf9f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem 0xfeaf0000-0xfeafffff irq 7 at device 1.0 on pci2 ata-: ata2 exists, using next available unit number ata2: iobase=0xdff0 altiobase=0xdfe6 bmaddr=0xdf90 ata2: mask=03 status0=20 status1=30 ata2: mask=03 ostat0=20 ostat2=30 ata2-master: ATAPI probe a=20 b=20 ata2-slave: ATAPI probe a=30 b=30 ata2: mask=03 status0=20 status1=30 ata2-master: ATA probe a=25 b=25 ata2-slave: ATA probe a=25 b=25 ata2: devices=00 ata2: at 0xdff0 on atapci1 ata3: iobase=0xdfa8 altiobase=0xdfe2 bmaddr=0xdf98 ata3: mask=03 status0=20 status1=30 ata3: mask=03 ostat0=20 ostat2=30 ata3-master: ATAPI probe a=20 b=20 ata3-slave: ATAPI probe a=30 b=30 ata3: mask=03 status0=20 status1=30 ata3-master: ATA probe a=25 b=25 ata3-slave: ATA probe a=25 b=25 ata3: devices=00 ata3: at 0xdfa8 on atapci1 using shared irq7. atapci2: <Promise TX2 ATA100 controller> port 0xdf60-0xdf6f,0xdf88-0xdf8b,0xdf80-0xdf87,0xdf8c-0xdf8f,0xdfa0-0xdfa7 mem 0xfead0000-0xfeadffff irq 11 at device 2.0 on pci2 ata-: ata2 exists, using next available unit number ata-: ata2 exists, using next available unit number ata4: iobase=0xdfa0 altiobase=0xdf8e bmaddr=0xdf60 ata4: mask=03 status0=20 status1=30 ata4: mask=03 ostat0=20 ostat2=30 ata4-master: ATAPI probe a=20 b=20 ata4-slave: ATAPI probe a=30 b=30 ata4: mask=03 status0=20 status1=30 ata4-master: ATA probe a=25 b=25 ata4-slave: ATA probe a=25 b=25 ata4: devices=00 ata4: at 0xdfa0 on atapci2 ata5: iobase=0xdf80 altiobase=0xdf8a bmaddr=0xdf68 ata5: mask=03 status0=20 status1=30 ata5: mask=03 ostat0=20 ostat2=30 ata5-master: ATAPI probe a=20 b=20 ata5-slave: ATAPI probe a=30 b=30 ata5: mask=03 status0=20 status1=30 ata5-master: ATA probe a=25 b=25 ata5-slave: ATA probe a=25 b=25 ata5: devices=00 ata5: at 0xdf80 on atapci2 using shared irq11. ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 11 at device 14.0 on pci0 ahc0: Reading SEEPROM...done. ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 422 instructions downloaded aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xfebfef80-0xfebfefff irq 7 at device 20.0 on pci0 xl0: Ethernet address: 00:50:da:76:81:34 xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x001018, model 0x0012, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached pci-: pci1 exists, using next available unit number pcib1: <Intel 82443GX host to AGP bridge> on motherboard pci3: <PCI bus> on pcib1 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 13 devices, largest 194 bytes PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00 PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400 PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100000-0x1ffdffff, size=0x1fee0000 PNP0c01: adding fixed memory32 range 0x1ffe0000-0x1fff7fff, size=0x18000 PNP0c01: adding fixed memory32 range 0x1fff8000-0x1fffffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfffc0000-0xffffffff, size=0x40000 isa0: too many memory ranges pnpbios: handle 0 device ID PNP0c01 (010cd041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0 PNP0000: adding irq mask 00x4 PNP0000: end config pnpbios: handle 1 device ID PNP0000 (0000d041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x90, size=0x11, align=0 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0 PNP0200: end config pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0100: adding irq mask 00x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 PNP0100: end config pnpbios: handle 3 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 PNP0b00: end config pnpbios: handle 4 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 00x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 PNP0303: end config pnpbios: handle 5 device ID PNP0303 (0303d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0 PNP0800: end config pnpbios: handle 6 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0 PNP0c04: end config pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1 PNP0c02: adding io range 0x22-0x3f, size=0x1e, align=0x1 PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1 PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1 PNP0c02: adding io range 0x91-0x93, size=0x3, align=0x1 PNP0c02: adding io range 0xa2-0xbe, size=0x1d, align=0x1 PNP0c02: adding io range 0x400-0x43f, size=0x40, align=0x1 PNP0c02: adding io range 0x440-0x44f, size=0x10, align=0x1 PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: skipping empty range PNP0c02: end config pnpbios: handle 8 device ID PNP0c02 (020cd041) PNP0c02: adding io range 0x290-0x297, size=0x8, align=0x1 PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1 PNP0c02: end config pnpbios: handle 9 device ID PNP0c02 (020cd041) PNP0a03: end config pnpbios: handle 10 device ID PNP0a03 (030ad041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x4 PNP0501: adding irq mask 0x10 PNP0501: end config pnpbios: handle 11 device ID PNP0501 (0105d041) PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: end config pnpbios: handle 12 device ID PNP0700 (0007d041) isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xd17ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: failed to reset the aux device. vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) isa_probe_children: probing PnP devices unknown: <PNP0c01> failed to probe at iomem 0-0x9fbff,0x9fc00-0x9ffff,0xe0000-0xfffff,0x100000-0x1ffdffff,0x1ffe0000-0x1fff7fff,0x1fff8000-0x1fffffff,0xfec00000-0xfec00fff,0xfee00000-0xfee00fff on isa0 unknown: <PNP0000> can't assign resources unknown: <PNP0000> at port 0x20-0x21,0xa0-0xa1 irq 2 on isa0 unknown: <PNP0200> failed to probe at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde drq 4 on isa0 unknown: <PNP0100> failed to probe at port 0x40-0x43 irq 0 on isa0 unknown: <PNP0b00> failed to probe at port 0x70-0x71 irq 8 on isa0 unknown: <PNP0303> can't assign resources unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0c04> failed to probe at port 0xf0-0xff irq 13 on isa0 unknown: <PNP0c02> failed to probe at port 0x4d0-0x4d1,0xcf8-0xcff,0x10-0x1f,0x22-0x3f,0x50-0x52,0x72-0x77,0x91-0x93,0xa2-0xbe,0x400-0x43f,0x440-0x44f on isa0 unknown: <PNP0c02> failed to probe at port 0x290-0x297,0x398-0x399 on isa0 unknown: <PNP0a03> failed to probe on isa0 unknown: <PNP0501> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 unknown: <PNP0700> can't assign resources unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: sl0 attached bpf: faith0 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c8c0, tty 630002, net 670082 ata0-master: success setting UDMA2 on Intel chip Creating DISK ad0 ad0: <IBM-DJNA-351520/J56OA30K> ATA-4 disk at ata0-master ad0: 14664MB (30033360 sectors), 29795 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 ad0: 14664MB <IBM-DJNA-351520> [29795/16/63] at ata0-master UDMA33 ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <SAMSUNG CD-ROM SCR-3231/S103> CDROM drive at ata1 as master acd0: read 687KB/s (2021KB/s), 512KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Waiting 5 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (ahc0:A:3:0): Sending SDTR period c, offset 7f (ahc0:A:3:0): Received SDTR period c, offset 7 Filtered to period c, offset 7 ahc0: target 3 synchronous at 20.0MHz, offset = 0x7 (ahc0:A:3:0): Sending SDTR period c, offset 7 (ahc0:A:3:0): Received SDTR period c, offset 7 Filtered to period c, offset 7 Creating DISK cd0 pass0 at ahc0 bus 0 target 3 lun 0 pass0: <YAMAHA CRW2100S 1.0H> Removable CD-ROM SCSI-2 device pass0: Serial Number ' pass0: 20.000MB/s transfers (20.000MHz, offset 7) Mounting root from ufs:/dev/ad0s1a (ahc0:A:3:0): Sending SDTR period c, offset 7 (ahc0:A:3:0): Received SDTR period c, offset 7 Filtered to period c, offset 7 (ahc0:A:3:0): Sending SDTR period c, offset 7 (ahc0:A:3:0): Received SDTR period c, offset 7 Filtered to period c, offset 7 (cd0:ahc0:0:3:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ahc0:0:3:0): NOT READY asc:3a,1 (cd0:ahc0:0:3:0): Medium not present - tray closed cd0 at ahc0 bus 0 target 3 lun 0 cd0: <YAMAHA CRW2100S 1.0H> Removable CD-ROM SCSI-2 device cd0: Serial Number ' cd0: 20.000MB/s transfers (20.000MHz, offset 7) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ad0s1: type 0xa5, start 63, end = 30033359, size 30033297 : OK start_init: trying /sbin/init splash: image decoder found: snake_saver --------------C4F700E2DC41F16109B380B9-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3BB0AADE.DF6A3751>