Date: Wed, 17 Sep 2003 07:28:32 -0400 From: "Dan Langille" <dan@langille.org> To: freebsd-questions@FreeBSD.org Cc: dan@langille.org Subject: can't get dmesg to find Boca multiport serial card Message-ID: <3F680D20.3833.A10F772@localhost>
next in thread | raw e-mail | index | archive | help
I am trying to get a Boca 8 port serial card running under 4.8- STABLE. dmesg doesn't see the serial ports at all. I've added the following to my kernel, compiled it, and installed: options COM_MULTIPORT #code for some cards with shared IRQs device sio4 at isa? port 0x100 flags 0xb05 device sio5 at isa? port 0x108 flags 0xb05 device sio6 at isa? port 0x110 flags 0xb05 device sio7 at isa? port 0x118 flags 0xb05 device sio8 at isa? port 0x120 flags 0xb05 device sio9 at isa? port 0x128 flags 0xb05 device sio10 at isa? port 0x130 flags 0xb05 device sio11 at isa? port 0x138 flags 0xb05 irq 10 With regards to devices: $ ls /dev/sio* ls: /dev/sio*: No such file or directory I haven't done any MAKDEVs. Is that necessary. I thought not because I'm seeing this: sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 Clues please? Here's the card: http://www.fhttp://www.freebsddiary.org/images/boca-8-port-serial- card.jpg Here's dmesg output: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-STABLE #4: Fri Sep 12 09:26:38 EDT 2003 dan@polo.example.org:/usr/obj/usr/src/sys/DUCKY Timecounter "i8254" frequency 1193182 Hz CPU: Cyrix 6x86 (486-class CPU) Origin = "CyrixInstead" DIR=0x1531 Stepping=1 Revision=5 CPU cache: write-through mode real memory = 67108864 (65536K bytes) config> di pcic0 config> di psm0 config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di cs0 config> di bt0 config> di aic0 config> di aha0 config> di adv0 config> q avail memory = 61128704 (59696K bytes) Preloaded elf kernel "kernel" at 0xc041f000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc041f09c. md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 rl0: <RealTek 8139 10/100BaseTX> port 0x6000-0x60ff mem 0xe0000000- 0xe00000ff irq 9 at device 17.0 on pci0 rl0: Ethernet address: 00:50:bf:17:70:13 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. ed0 at port 0x280-0x29f iomem 0xd800 irq 10 on isa0 ed0: address 00:c0:df:b0:0a:2b, type NE2000 (16 bit) IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled ad0: 9541MB <ST310211A> [19386/16/63] at ata0-master WDMA2 acd0: CDROM <HL-DT-ST CD-ROM GCR-8520B> at ata0-slave PIO4 Mounting root from ufs:/dev/ad0s1a -- Dan Langille : http://www.langille.org/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F680D20.3833.A10F772>