Date: Wed, 3 May 2006 14:00:41 -0700 From: "Ted Mittelstaedt" <tedm@toybox.placo.com> To: <freebsd-questions@freebsd.org> Cc: 'William' <willay@gmail.com> Subject: RE: FreeBSD 6.0 compat with DL320 G4 Message-ID: <LOBBIFDAGNMAMLGJJCKNKENNFDAA.tedm@toybox.placo.com> In-Reply-To: <LOBBIFDAGNMAMLGJJCKNCENNFDAA.tedm@toybox.placo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Just an update, I checked again and our server is running a 3.0Ghz not a 2.8Ghz pentium D. Ted >-----Original Message----- >From: Ted Mittelstaedt [mailto:tedm@toybox.placo.com] >Sent: Wednesday, May 03, 2006 1:44 PM >To: freebsd-questions@freebsd.org >Cc: 'William' >Subject: RE: FreeBSD 6.0 compat with DL320 G4 > > > >Hi All, > > This server is using the Broadcom BCM5704C, the problem child >chipset (that is >discussed in the PR 94307 that I referred to) is the BCM5714. > >This is also running a different CPU - your running a 3.4Ghz >pentium 4, we are running >a 2.8Ghz Pentium D. Your CPU chip ID is 0xf43 ours is 0xf44 > > While you can specify different CPU speeds, I would be pretty >nervous in >assuming that simply specifying a different CPU speed would >change the ethernet >chipset on the motherboard. > > If William does go forward with his order I would certainly >suggest he order the >faster server, and cross his fingers. > > NoSpam it would be very useful if you could submit a followup >to the PR 94307 >with your dmesg, and note that while the server model # is the >same the ethernet >chipset is different. > >Ted > >>-----Original Message----- >>From: owner-freebsd-questions@freebsd.org >>[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of >>No@SPAM@mgEDV.net >>Sent: Tuesday, May 02, 2006 7:25 AM >>To: freebsd-questions@freebsd.org >>Cc: 'William' >>Subject: RE: FreeBSD 6.0 compat with DL320 G4 >> >> >> >>> What was your experience like with 6.0-RELEASE and the dl320 g4? I've >>> had a quote back on that model so could be near to actually getting >>> some hardware for once :) >> >>we didn't really run 6.0-RELEASE on the system, as the 6.1-BETAs had >>been out when we bought the server. therefore not really man exp. on >>this. >> >>for ted's request, here's the dmesg ;-) >>---------------------------------------------------------------- >>------------ >>- >>Copyright (c) 1992-2006 The FreeBSD Project. >>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, >1993, 1994 >> The Regents of the University of California. All rights reserved. >>FreeBSD 6.1-RC2 #0: Sun Apr 30 09:42:38 UTC 2006 >> root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC >>ACPI APIC Table: <HP 00000083> >>Timecounter "i8254" frequency 1193182 Hz quality 0 >>CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (3391.52-MHz 686-class CPU) >> Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 >> >>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP, >>MTRR,PGE,MCA >>,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> >> Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>> >> AMD Features=0x20000000<LM> >> Logical CPUs per core: 2 >>real memory = 1073688576 (1023 MB) >>avail memory = 1041743872 (993 MB) >>ioapic0 <Version 2.0> irqs 0-23 on motherboard >>ioapic1 <Version 2.0> irqs 24-47 on motherboard >>ioapic2 <Version 2.0> irqs 48-71 on motherboard >>kbd1 at kbdmux0 >>acpi0: <HP D18> on motherboard >>acpi0: Power Button (fixed) >>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 >>cpu0: <ACPI CPU> on acpi0 >>pcib0: <ACPI Host-PCI bridge> on acpi0 >>pci0: <ACPI PCI bus> on pcib0 >>pcib0: no PRT entry for 0.31.INTA >>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 >>pci5: <ACPI PCI bus> on pcib1 >>pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci5 >>pci6: <ACPI PCI bus> on pcib2 >>bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem >>0xfdff0000-0xfdffffff irq 24 at device 1.0 on pci6 >>miibus0: <MII bus> on bge0 >>brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 >>brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, >>1000baseTX-FDX, auto >>bge0: Ethernet address: 00:15:60:aa:39:d2 >>bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem >>0xfdfe0000-0xfdfeffff irq 25 at device 1.1 on pci6 >>miibus1: <MII bus> on bge1 >>brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 >>brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, >>1000baseTX-FDX, auto >>bge1: Ethernet address: 00:15:60:aa:39:d1 >>pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci5 >>pci9: <ACPI PCI bus> on pcib3 >>pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0 >>pci2: <ACPI PCI bus> on pcib4 >>uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port >>0x1000-0x101f irq 16 at device 29.0 on pci0 >>uhci0: [GIANT-LOCKED] >>usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 >>usb0: USB revision 1.0 >>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>uhub0: 2 ports with 2 removable, self powered >>uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port >>0x1020-0x103f irq 17 at device 29.1 on pci0 >>uhci1: [GIANT-LOCKED] >>usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 >>usb1: USB revision 1.0 >>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>uhub1: 2 ports with 2 removable, self powered >>uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port >>0x1040-0x105f irq 18 at device 29.2 on pci0 >>uhci2: [GIANT-LOCKED] >>usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 >>usb2: USB revision 1.0 >>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>uhub2: 2 ports with 2 removable, self powered >>uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port >>0x1060-0x107f irq 19 at device 29.3 on pci0 >>uhci3: [GIANT-LOCKED] >>usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 >>usb3: USB revision 1.0 >>uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >>uhub3: 2 ports with 2 removable, self powered >>ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem >>0xfbef0000-0xfbef03ff >>irq 16 at device 29.7 on pci0 >>ehci0: [GIANT-LOCKED] >>usb4: EHCI version 1.0 >>usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 >>usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 >>usb4: USB revision 2.0 >>uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 >>uhub4: 8 ports with 8 removable, self powered >>umass0: USB Flash Disk, rev 2.00/2.00, addr 2 >>pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 >>pci1: <ACPI PCI bus> on pcib5 >>pci1: <base peripheral> at device 2.0 (no driver attached) >>pci1: <base peripheral> at device 2.2 (no driver attached) >>pci1: <display, VGA> at device 3.0 (no driver attached) >>isab0: <PCI-ISA bridge> at device 31.0 on pci0 >>isa0: <ISA bus> on isab0 >>atapci0: <Intel ICH6 UDMA100 controller> port >>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 7 at device >>31.1 on pci0 >>ata0: <ATA channel 0> on atapci0 >>ata1: <ATA channel 1> on atapci0 >>atapci1: <Intel ICH6 SATA150 controller> port >>0x1080-0x1087,0x1088-0x108b,0x1090-0x1097,0x1098-0x109b,0x10a0-0 >>x10af mem >>0xfbee0000-0xfbee03ff irq 17 at device 31.2 on pci0 >>ata2: <ATA channel 0> on atapci1 >>ata3: <ATA channel 1> on atapci1 >>acpi_tz0: <Thermal Zone> on acpi0 >>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >>atkbd0: <AT Keyboard> irq 1 on atkbdc0 >>kbd0 at atkbd0 >>atkbd0: [GIANT-LOCKED] >>psm0: <PS/2 Mouse> irq 12 on atkbdc0 >>psm0: [GIANT-LOCKED] >>psm0: model Generic PS/2 mouse, device ID 0 >>sio0: <Standard PC COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 >>sio0: type 16550A >>fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 >>drq 2 on acpi0 >>fdc0: [FAST] >>pmtimer0 on isa0 >>orm0: <ISA Option ROMs> at iomem >>0xc0000-0xc7fff,0xc8000-0xcc7ff,0xee000-0xeffff on isa0 >>ppc0: parallel port not found. >>sc0: <System console> at flags 0x100 on isa0 >>sc0: VGA <16 virtual consoles, flags=0x300> >>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem >>0xa0000-0xbffff on isa0 >>Timecounter "TSC" frequency 3391523707 Hz quality 800 >>Timecounters tick every 1.000 msec >>acd0: CDROM <ASUS CD-S500/A/V1.4D> at ata0-master UDMA33 >>ad4: 76319MB <Maxtor 6L080M0 BACE1G10> at ata2-master SATA150 >>ad6: 76319MB <Maxtor 6L080M0 BACE1G10> at ata3-master SATA150 >>ar0: 76319MB <Intel MatrixRAID RAID1> status: READY >>ar0: disk0 READY (master) using ad4 at ata2-master >>ar0: disk1 READY (mirror) using ad6 at ata3-master >>Trying to mount root from ufs:/dev/ar0s1a >>---------------------------------------------------------------- >>------------ >>- >> >>_______________________________________________ >>freebsd-questions@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>To unsubscribe, send any mail to >>"freebsd-questions-unsubscribe@freebsd.org" >> >>-- >>No virus found in this incoming message. >>Checked by AVG Free Edition. >>Version: 7.1.385 / Virus Database: 268.5.1/328 - Release Date: 5/1/2006 >>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?LOBBIFDAGNMAMLGJJCKNKENNFDAA.tedm>