Date: Mon, 24 Dec 2001 09:49:23 -0800 From: "Peter Ong" <peter@haloflightleader.net> To: <freebsd-hardware@FreeBSD.ORG>, <freebsd-stable@FreeBSD.ORG> Subject: Cabletron E22xx DNI (ISA) Message-ID: <000c01c18ca3$5343e180$0101a8c0@haloflightleader.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0009_01C18C60.4467FFE0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hello,
I posted this stuff before, but I really need some help. Thanks in advance.
There are txt files attached (to those using Windex, open these with
Wordpad -- these were written directly from the FBSD box.):
e22_test.txt is the output from the configuration utility of the
manufacturer of the NIC.
dmesg.1.txt shows my initial configuration going with controller 1's config.
kernel.conf.1.txt is the result.
The set of #2s are going with the next setting, the same with #3. Notice on
all sets of kernel.conf's, they all say "Unknown: can't assign resource."
... to my nic.
Can someone please help. Desperate. I've taken a shower since my last
post, so I don't smell so bad, but I still have a killer cold.
Have a Merry Christmas to all of you.
Peter
------=_NextPart_000_0009_01C18C60.4467FFE0
Content-Type: text/plain;
name="dmesg.1.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.1.txt"
Copyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001=0A=
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: Pentium/P5 (60.00-MHz 586-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x515 Stepping =3D 5=0A=
Features=3D0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>=0A=
real memory =3D 42205184 (41216K bytes)=0A=
config> di pcic0=0A=
config> di sn0=0A=
config> di ie0=0A=
config> di fe0=0A=
config> di ed0=0A=
config> di cs0=0A=
config> di bt0=0A=
config> di ata1=0A=
config> di aic0=0A=
config> di aha0=0A=
config> di adv0=0A=
config> en lnc0=0A=
config> ir lnc0 5=0A=
config> po lnc0 0x300=0A=
config> q=0A=
FreeBSD Kernel Configuration Utility - Version 1.2=0A=
Type "help" for help or "visual" to go to the visual=0A=
configuration interface (requires MGA/VGA display or=0A=
serial terminal capable of displaying ANSI graphics).=0A=
config> drq ;l\^H \^H\^H \^Hlnc0 3=0A=
config> ls=0A=
Device port irq drq iomem iosize unit flags enab=0A=
fdc0 0x3f0 6 2 0 0 0 0 Yes =0A=
fd0 0 0 0 0 0 0 0 Yes =0A=
fd1 0 0 0 0 0 1 0 Yes =0A=
ata0 0x1f0 14 0 0 0 0 0 Yes =0A=
ata1 0x170 15 0 0 0 1 0 No =0A=
adv0 0 0 0 0 0 0 0 No =0A=
bt0 0 0 0 0 0 0 0 No =0A=
aha0 0 0 0 0 0 0 0 No =0A=
aic0 0 0 0 0 0 0 0 No =0A=
atkbdc0 0x60 0 0 0 0 0 0 Yes =0A=
atkbd0 0 1 0 0 0 0 0x1 Yes =0A=
psm0 0 12 0 0 0 0 0 Yes =0A=
vga0 0 0 0 0 0 0 0 Yes =0A=
sc0 0 0 0 0 0 0 0x100 Yes =0A=
npx0 0xf0 13 0 0 0 0 0 Yes =0A=
apm0 0 0 0 0 0 0 0x20 No =0A=
pcic0 0x3e0 0 0 d0000 0 0 0 No =0A=
pcic1 0x3e2 0 0 d4000 0 1 0 No =0A=
sio0 0x3f8 4 0 0 0 0 0x10 Yes =0A=
sio1 0x2f8 3 0 0 0 1 0 Yes =0A=
sio2 0x3e8 5 0 0 0 2 0 No =0A=
sio3 0x2e8 9 0 0 0 3 0 No =0A=
=0A=
Device port irq drq iomem iosize unit flags enab=0A=
ppc0 0 7 0 0 0 0 0 Yes =0A=
ed0 0x280 10 0 d8000 0 0 0 No =0A=
fe0 0x300 0 0 0 0 0 0 No =0A=
ie0 0x300 10 0 d0000 0 0 0 No =0A=
lnc0 0x300 5 3 0 0 0 0 Yes =0A=
cs0 0x300 0 0 0 0 0 0 No =0A=
sn0 0x300 10 0 0 0 0 0 No =0A=
=0A=
Number of EISA slots to probe: 10=0A=
config> q=0A=
avail memory =3D 36540416 (35684K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc0480000.=0A=
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04800a8.=0A=
Intel Pentium detected, installing workaround for F00F bug=0A=
md0: Malloc disk=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
isa0: <ISA bus> on motherboard=0A=
isa0: too many dependant configs (8)=0A=
isa0: too many dependant configs (8)=0A=
isa0: too many dependant configs (8)=0A=
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe7fff on isa0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model IntelliMouse, device ID 3=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1: configured irq 3 not in bitmap of probed irqs 0=0A=
ppc0: cannot reserve I/O port range=0A=
unknown: <Cabletron E22xx Adapter> can't assign resources=0A=
ad0: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at =
ata0-master BIOSPIO=0A=
acd0: CDROM <CREATIVE CD1220E> at ata0-slave using BIOSPIO=0A=
Mounting root from ufs:/dev/ad0s1a=0A=
------=_NextPart_000_0009_01C18C60.4467FFE0
Content-Type: text/plain;
name="dmesg.2.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.2.txt"
Copyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001=0A=
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: Pentium/P5 (60.00-MHz 586-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x515 Stepping =3D 5=0A=
Features=3D0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>=0A=
real memory =3D 42205184 (41216K bytes)=0A=
config> di pcic0=0A=
config> di sn0=0A=
config> di ie0=0A=
config> di fe0=0A=
config> di ed0=0A=
config> di cs0=0A=
config> di bt0=0A=
config> di ata1=0A=
config> di aic0=0A=
config> di aha0=0A=
config> di adv0=0A=
config> en lnc0=0A=
config> ir lnc0 5=0A=
config> po lnc0 0x300=0A=
config> drq lnc0 3=0A=
config> q=0A=
FreeBSD Kernel Configuration Utility - Version 1.2=0A=
Type "help" for help or "visual" to go to the visual=0A=
configuration interface (requires MGA/VGA display or=0A=
serial terminal capable of displaying ANSI graphics).=0A=
config> conf\^H \^H\^H \^H\^H \^H\^H \^Hq=0A=
avail memory =3D 36540416 (35684K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc0480000.=0A=
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04800a8.=0A=
Intel Pentium detected, installing workaround for F00F bug=0A=
md0: Malloc disk=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
isa0: <ISA bus> on motherboard=0A=
isa0: too many dependant configs (8)=0A=
isa0: too many dependant configs (8)=0A=
isa0: too many dependant configs (8)=0A=
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe7fff on isa0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model IntelliMouse, device ID 3=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1: configured irq 3 not in bitmap of probed irqs 0=0A=
ppc0: cannot reserve I/O port range=0A=
unknown: <Cabletron E22xx Adapter> can't assign resources=0A=
ad0: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at =
ata0-master BIOSPIO=0A=
acd0: CDROM <CREATIVE CD1220E> at ata0-slave using BIOSPIO=0A=
Mounting root from ufs:/dev/ad0s1a=0A=
------=_NextPart_000_0009_01C18C60.4467FFE0
Content-Type: text/plain;
name="dmesg.3.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.3.txt"
Copyright (c) 1992-2001 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001=0A=
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CPU: Pentium/P5 (60.00-MHz 586-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x515 Stepping =3D 5=0A=
Features=3D0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>=0A=
real memory =3D 42205184 (41216K bytes)=0A=
config> di pcic0=0A=
config> di sn0=0A=
config> di ie0=0A=
config> di fe0=0A=
config> di ed0=0A=
config> di cs0=0A=
config> di bt0=0A=
config> di ata1=0A=
config> di aic0=0A=
config> di aha0=0A=
config> di adv0=0A=
config> en lnc0=0A=
config> ir lnc0 5=0A=
config> po lnc0 0x200=0A=
config> drq lnc0 3=0A=
config> q=0A=
FreeBSD Kernel Configuration Utility - Version 1.2=0A=
Type "help" for help or "visual" to go to the visual=0A=
configuration interface (requires MGA/VGA display or=0A=
serial terminal capable of displaying ANSI graphics).=0A=
config> q=0A=
avail memory =3D 36540416 (35684K bytes)=0A=
Preloaded elf kernel "kernel" at 0xc0480000.=0A=
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04800a8.=0A=
Intel Pentium detected, installing workaround for F00F bug=0A=
md0: Malloc disk=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
isa0: <ISA bus> on motherboard=0A=
isa0: too many dependant configs (8)=0A=
isa0: too many dependant configs (8)=0A=
isa0: too many dependant configs (8)=0A=
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe7fff on isa0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: model IntelliMouse, device ID 3=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1: configured irq 3 not in bitmap of probed irqs 0=0A=
ppc0: cannot reserve I/O port range=0A=
unknown: <Cabletron E22xx Adapter> can't assign resources=0A=
ad0: 1221MB <Seagate Technology 1275MB - ST31276A> [2482/16/63] at =
ata0-master BIOSPIO=0A=
acd0: CDROM <CREATIVE CD1220E> at ata0-slave using BIOSPIO=0A=
Mounting root from ufs:/dev/ad0s1a=0A=
fd0c: hard error reading fsbn 0 of 0-3 (No status)=0A=
------=_NextPart_000_0009_01C18C60.4467FFE0
Content-Type: text/plain;
name="E22_test.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="E22_test.txt"
P----------------------- E22_TEST.EXE adapter test results =
-------------------------
Cabletron E22XX Ethernet adapter.
ADAPTER 1:
Controller 1 of 2.
Base Address: 300h
DMA Channel: 3
Interrupt Level: 5
Network Address: 00-00-1D-16-74-9D
Pass Count: 4
Error Count: 0
Test Status:
Passed.
Controller 2 of 2.
Base Address: 200h
DMA Channel: 3
Interrupt Level: 5
Network Address: 00-00-1D-16-74-9D
Pass Count: 4
Error Count: 0
Test Status:
Passed.
-------------------------------- End of file =
----------------------------------
------=_NextPart_000_0009_01C18C60.4467FFE0
Content-Type: text/plain;
name="kernel.conf.1.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="kernel.conf.1.txt"
di pcic0=0A=
di sn0=0A=
di ie0=0A=
di fe0=0A=
di ed0=0A=
di cs0=0A=
di bt0=0A=
di ata1=0A=
di aic0=0A=
di aha0=0A=
di adv0=0A=
en lnc0=0A=
ir lnc0 5=0A=
po lnc0 0x300=0A=
q=0A=
------=_NextPart_000_0009_01C18C60.4467FFE0
Content-Type: text/plain;
name="kernel.conf.2.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="kernel.conf.2.txt"
di pcic0=0A=
di sn0=0A=
di ie0=0A=
di fe0=0A=
di ed0=0A=
di cs0=0A=
di bt0=0A=
di ata1=0A=
di aic0=0A=
di aha0=0A=
di adv0=0A=
en lnc0=0A=
ir lnc0 5=0A=
po lnc0 0x300=0A=
drq lnc0 3=0A=
q=0A=
------=_NextPart_000_0009_01C18C60.4467FFE0
Content-Type: text/plain;
name="kernel.conf.3.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="kernel.conf.3.txt"
di pcic0=0A=
di sn0=0A=
di ie0=0A=
di fe0=0A=
di ed0=0A=
di cs0=0A=
di bt0=0A=
di ata1=0A=
di aic0=0A=
di aha0=0A=
di adv0=0A=
en lnc0=0A=
ir lnc0 5=0A=
po lnc0 0x200=0A=
drq lnc0 3=0A=
q=0A=
------=_NextPart_000_0009_01C18C60.4467FFE0--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000c01c18ca3$5343e180$0101a8c0>