Date: Thu, 28 May 1998 11:30:41 -0400 (EDT) From: "Rick C. Petty" <rick@kris.wpi.edu> To: dirk.vangulik@jrc.it (Dirk-Willem van Gulik) Cc: freebsd-mobile@FreeBSD.ORG Subject: Re: Toshiba Tecra 550CDT internal modem Message-ID: <199805281530.LAA24990@kris.wpi.edu> In-Reply-To: <Pine.BSF.3.96.980528090447.282O-100000@elpc36.jrc.it> from Dirk-Willem van Gulik at "May 28, 98 09:05:57 am"
next in thread | previous in thread | raw e-mail | index | archive | help
> > How do I get my internal modem to work on my Toshiba 550CDT? > > What kernel are you using ?; I beleive we have the same here and it Stupid me, I forgot to mention. 2.2.6-R. > works on the COM2 settings (which are enforced in the BIOS, as you > surmised. And did you try a DEBUG/VERBOSE boot and observe the > messages. One of the UARTs might not be recognized by default. Well I tried config-ing a bunch of the UARTs, with no luck, but I'll try the debug and verbose: pci0:10: vender=0x1179, device=0x0701, class=comms, subclass=0x80 int a irq 11 [do driver assigned] map(10): io(ffc0) pci0:11: vendor=0x1033, device=0x0035, class=serial, subclass=0x03 int a irq 11 [no driver assigned] map(10): mem32(f7fff000) pci0: uses 67108864 bytes of memore from f8000000 upto fbffffff. Probing for PnP devices: Trying Read_port at 203 Trying Read_port at 243 Trying Read_port at 283 Trying Read_port at 2c3 Trying Read_port at 303 Trying Read_port at 343 Trying Read_port at 383 Trying Read_port at 3c3 No Plug-n-Play devices were found Probing for devices on the ISA bus: sc0: the current keyboard controller command byte 0047 kbdio: DIOGNOSE status:0055 kbdio: TEST_KBD_PORT status:0000 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0 at 0x60-0x6f irq 1 on motherboard sc0: BIOS video mode:3 sc0: VGA registers upon power-up ... skipping some sc0 output ... sc0: VGA color <16 virtual consoles, flags=0x0> sio0 not found at 0x3f8 sio1 not found at 0x2f8 sio2 not found at 0x3e8 sio3 not found at 0x2e8 lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface bpf: lp0 attached psm0: current command byte:0047 kbdio: TEST_AUX_PORT status:0000 kbdio: RESET_AUX return code:00fa kbdio: RESET AUX status:00aa kbdio: RESET_AUX ID:0000 ... skipping some psm0 output ... psm0: syncmask:c0, syncbits:00 pca0 on motherboard pca0: PC speaker audio driver mss_probe: no address supplied, try default 0x530 mss_detect - chip revision 0x0a mss_detect() - Detected CS4231 pcm0 at 0x530 irq 5 drq 1 flags 0xa200 on isa mss_attach <mss>0 at 0x530 irq 5 dma 1:1 flags 0xa200 ... skipping the rest: disk check outputs, PC-Card, etc ... It doesn't look like either -d or -v or even -g gave much more help on the serial devices. Does this help? --Rick C. Petty, aka Snoopy mailto: rick@kris.wpi.edu ----------------------------------------------------------------------- C/C++/DBMS/SQL/Perl/Java/HTML http://kris.wpi.edu/~rick/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199805281530.LAA24990>