Date: Sun, 26 Oct 2003 12:15:57 -0800 (PST) From: "Chris Willis" <cwillis@chriswillis.tzo.com> To: freebsd-questions@FreeBSD.ORG Subject: Compile Errors during Make Buildworld - FreeBSD 4.9 Message-ID: <3489.192.168.1.254.1067199357.squirrel@chriswillis.tzo.com>
next in thread | raw e-mail | index | archive | help
I am having errors during a "make buildworld" command. Just did a CVSUP
this morning. Does anyone know what this means?
DMESG Output
------------
mordor# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RC #5: Tue Sep 30 06:12:34 PDT 2003
cwillis@mordor.chriswillis.tzo.com:/usr/obj/usr/src/sys/FIREWALL
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Celeron(TM) CPU 1200MHz (1196.81-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1342111744 (1310656K bytes)
avail memory = 1296916480 (1266520K bytes)
Preloaded elf kernel "kernel" at 0xc0580000.
VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc04d8542 (1000022)
VESA: ATI MACH64
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00fc3e0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem
0xfe000000-0xfe0fffff,0xfe102000-0xfe102fff irq 11 at device 2.0 on pci0
fxp0: Ethernet address 00:c0:9f:12:0a:e2
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xec80-0xecbf irq 10 at device
10.0 on pci0
xl0: Ethernet address: 00:60:08:aa:7f:1b
miibus1: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GR graphics accelerator> at 11.0
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 ATA100 controller> port
0x8c0-0x8c3,0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at
device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 5 at
device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem
0xf9000000-0xf9000fff irq 3 at device 3.0 on pci1
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled
ad1: 38146MB <WDC WD400BB-18DEA0> [77504/16/63] at ata0-slave UDMA100
ad2: 114473MB <WDC WD1200AB-00CBA1> [232581/16/63] at ata1-master UDMA100
ad3: 114473MB <WDC WD1200AB-00CBA1> [232581/16/63] at ata1-slave UDMA100
acd0: CDROM <SAMSUNG CD-ROM SC-148C> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 5 lun 0
sa0: <SONY SDT-9000 125F> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
Mounting root from ufs:/dev/ad1s1a
xl0: promiscuous mode enabled
xl0: promiscuous mode disabled
usb0: scheduling overrun
Tail Output from the make buildworld command
--------------------------------------------
rm -f /usr/obj/usr/src/i386/usr/lib/compat/liby.so
/usr/obj/usr/src/i386/usr/lib/liby.so.2.0
/usr/obj/usr/src/i386/usr/lib/compat/liby.so.2.0
/usr/obj/usr/src/i386/usr/lib/compat/liby.so.2
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 liby.a
/usr/obj/usr/src/i386/usr/lib
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 liby_p.a
/usr/obj/usr/src/i386/usr/lib
===> lib/libz
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 libz.a
/usr/obj/usr/src/i386/usr/lib
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 libz_p.a
/usr/obj/usr/src/i386/usr/lib
sh /usr/src/tools/install.sh -s -o root -g wheel -m 444 libz.so.2
/usr/obj/usr/src/i386/usr/lib
ln -fs libz.so.2 /usr/obj/usr/src/i386/usr/lib/libz.so
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444
/usr/src/lib/libz/zconf.h /usr/src/lib/libz/zlib.h
/usr/obj/usr/src/i386/usr/include
echo "===> secure/lib"; cd /usr/src/secure/lib; make DIRPRFX=secure/lib/
depend; make DIRPRFX=secure/lib/ all; make DIRPRFX=secure/lib/ install
===> secure/lib
===> secure/lib/libcipher
rm -f .depend
mkdep -f .depend -a -DNO_IDEA /usr/src/secure/lib/libcipher/crypt.c
===> secure/lib/libtelnet
rm -f .depend
mkdep -f .depend -a -DENCRYPTION -DAUTHENTICATION -DSRA
-I/usr/src/secure/lib/libtelnet/../../../crypto/telnet
-I/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet -DNO_IDEA
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/genget.c
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/getent.c
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/misc.c
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/encrypt.c
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/auth.c
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/enc_des.c
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/sra.c
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/pk.c
===> secure/lib/libcrypto
===> secure/lib/libssl
===> secure/lib/libssh
===> secure/lib/libcipher
cc -O -pipe -march=pentiumpro -DNO_IDEA -c
/usr/src/secure/lib/libcipher/crypt.c -o crypt.o
building static cipher library
ranlib libcipher.a
cc -pg -O -pipe -march=pentiumpro -DNO_IDEA -c
/usr/src/secure/lib/libcipher/crypt.c -o crypt.po
building profiled cipher library
ranlib libcipher_p.a
cc -fpic -DPIC -O -pipe -march=pentiumpro -DNO_IDEA -c
/usr/src/secure/lib/libcipher/crypt.c -o crypt.So
building shared library libcipher.so.2
===> secure/lib/libtelnet
cc -O -pipe -march=pentiumpro -DENCRYPTION -DAUTHENTICATION -DSRA
-I/usr/src/secure/lib/libtelnet/../../../crypto/telnet
-I/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet -DNO_IDEA
-W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith
-Wno-uninitialized -Werror -Wreturn-type -Wcast-qual -Wwrite-strings
-Wswitch -Wshadow -c
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/genget.c -o
genget.o
cc -O -pipe -march=pentiumpro -DENCRYPTION -DAUTHENTICATION -DSRA
-I/usr/src/secure/lib/libtelnet/../../../crypto/telnet
-I/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet -DNO_IDEA
-W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith
-Wno-uninitialized -Werror -Wreturn-type -Wcast-qual -Wwrite-strings
-Wswitch -Wshadow -c
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/getent.c -o
getent.o
cc -O -pipe -march=pentiumpro -DENCRYPTION -DAUTHENTICATION -DSRA
-I/usr/src/secure/lib/libtelnet/../../../crypto/telnet
-I/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet -DNO_IDEA
-W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith
-Wno-uninitialized -Werror -Wreturn-type -Wcast-qual -Wwrite-strings
-Wswitch -Wshadow -c
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/misc.c -o
misc.o
cc1: warnings being treated as errors
In file included from
/usr/obj/usr/src/i386/usr/include/openssl/ui_compat.h:63,
from
/usr/obj/usr/src/i386/usr/include/openssl/des_old.h:439,
from /usr/obj/usr/src/i386/usr/include/openssl/des.h:101,
from
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/encrypt.h:64,
from
/usr/src/secure/lib/libtelnet/../../../crypto/telnet/libtelnet/misc.c:53:
/usr/obj/usr/src/i386/usr/include/openssl/ui.h:220: warning: function
declaration isn't a prototype
*** Error code 1
Stop in /usr/src/secure/lib/libtelnet.
*** Error code 1
Stop in /usr/src/secure/lib.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
mordor#
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3489.192.168.1.254.1067199357.squirrel>