Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 05 Jun 2008 18:27:52 -0400
From:      kalin m <kalin@el.net>
To:        freebsd-questions@freebsd.org
Subject:   Re: mfi freebsd7
Message-ID:  <48486868.30900@el.net>
In-Reply-To: <48483956.1060900@el.net>
References:  <4844293F.7020507@el.net>	<484438B1.5020202@unsane.co.uk>	<484441D8.8050207@el.net>	<48445F45.70604@unsane.co.uk>	<48448134.9080808@el.net> <484482E1.5010207@el.net>	<48450B08.6040806@unsane.co.uk> <48483956.1060900@el.net>

next in thread | previous in thread | raw e-mail | index | archive | help
ok...  i guess i've had it with the mfi

according to the hardware list on the freebsd site there are only 3 
cards supported by the mfi driver on freebsd7 and the LSI MegaSAS 1078 
ain't one of them. and lsi appears to be a remote company in singapore 
which apparently doesn't like to support anything that has bsd in it's 
name.

i'll be asking the hosting company to replace the card.
would like to hear from the list which SAS ones would be recommended - 
fully supported and have usable control/stats interfaces - and which 
ones to stay away from.

would appreciate any advice...

thanks....



kalin m wrote:
> hi vince...  thank you for the advice.
>
> i did update my ports and install the 1.01.40 version...
>
> i have the linux-base installed and the linprocfs and linsysfs mounted..
>
> but still nothing substantial happening:
>
> # megacli -adpCount
>                                   
> Controller Count: 0.
>
>
>
> any other ideas?!
>
> thanks...
>
>
>
>
> Vince Hoffman wrote:
>> kalin m wrote:
>>  
>>> sorry for the double posting....  just to update:
>>>
>>> i installed also the linux-megamgr same result:
>>> Failed to open driver node /dev/megadev0
>>>
>>> after linking megadev0 to mfi0 it can not see the version...     it 
>>> gets
>>> more and more pathetic by the minute...
>>>
>>>     
>>
>> odd that it wouldnt install as it did for me just now. Is your ports
>> tree up to date? I'm guessing not since the latest version reference in
>> ports is 1.01.40 and you found and got the 1.01.09 rpm/zip
>> try updating your ports to the latest tree (portsnap is my method of
>> choice but csup works fine too :) then try
>> cd /usr/ports/sysutils/linux-megacli && make install clean
>> Be sure to pay attention to the post-install message as it tells you
>> about whats needed in the way of kernel modules and sysctl variables as
>> well as what periodic config is available.
>>
>>
>> We do have a server at work using the LSI Logic / Symbios Logic MegaRAID
>> SAS 1078 which hosts 40 VPS's running quite happily in a RAID 1+0
>> config, each VPS running web/mail/ftp for a number between 1 and 100
>> websites, so they seem to perform well enough, this is a linux server
>> though.
>>     If you've been sold a RAID1 array i'd imagine thats what you have
>> unless you have reason to believe otherwise. It will appear as a singe
>> block device (/dev/mfid0) to the operating system though as you have 
>> see.
>>
>>
>> Vince
>>
>>
>>
>>  
>>>
>>>
>>> kalin m wrote:
>>>    
>>>> thanks Vince...  i didnt wanted to install the linux base because a
>>>> lot of kids will be running some 'cool' boards or blogs that probably
>>>> have cool linux holes too. but just for the hell of it and for he
>>>> purpose to get to the controller i did. it took a while to find the
>>>> Linux_MegaCli_1.01.09.zip. it's not on the freebsd site and not on the
>>>> LSI site (anymore) either..  anyway after a lot of rpm downloads and
>>>> patching and variable changing and fs mountings i get this:
>>>>
>>>> # /usr/local/sbin/megacli -adpCount
>>>>                                    ERROR:Could not detect controller.
>>>>
>>>> Controller Count: 0.
>>>>
>>>>
>>>> pretty neat system...
>>>>
>>>>
>>>> now what?!
>>>>
>>>>
>>>>
>>>>
>>>> Vince Hoffman wrote:
>>>>      
>>>>> kalin m wrote:
>>>>>        
>>>>>> megarc, right... read about it..  here:
>>>>>>
>>>>>> # megarc -AllAdpInfo help
>>>>>> usage :
>>>>>>     cmd -AllAdpInfo
>>>>>>       : prints info of all cards
>>>>>>
>>>>>>
>>>>>> .....  ok .....
>>>>>>
>>>>>> # megarc -AllAdpInfo
>>>>>>
>>>>>>   
>>>>>> ********************************************************************** 
>>>>>>
>>>>>>          MEGARC MegaRAID Configuration
>>>>>> Utility(FreeBSD)-1.04(03-02-2005)             By LSI Logic Corp.,USA
>>>>>>   
>>>>>> ********************************************************************** 
>>>>>>
>>>>>>      [Note: For SATA-2, 4 and 6 channel controllers, please specify
>>>>>>      Ch=0 Id=0..15 for specifying physical drive(Ch=channel,
>>>>>> Id=Target)]
>>>>>>
>>>>>>    Type ? as command line arg for help
>>>>>>
>>>>>>    No Adapters Found     Error: No MegaRaid Found
>>>>>>
>>>>>>
>>>>>> ?!?!?!  does that mean that there is no raid?  why then the df
>>>>>> output? the machine is supposed to have 4 250gig SAS drives.
>>>>>>
>>>>>>           
>>>>> Its more likely that megarc doesnt support the newer controllers
>>>>> which is a shame. you might have more luck with
>>>>> sysutils/linux-megacli since that explicitly mentions LSI MegaRAID
>>>>> SAS, I wish they would make the util open source though. Will mean
>>>>> you need the linux-base port installed and linux.ko loaded.
>>>>>
>>>>> A RAID1 config shoudl suit a busy webserver well.
>>>>>
>>>>> Vicne
>>>>>
>>>>>
>>>>>
>>>>>        
>>>>>> thanks...
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Vince Hoffman wrote:
>>>>>>          
>>>>>>> kalin m wrote:
>>>>>>>            
>>>>>>>> hi all...
>>>>>>>>
>>>>>>>> a hosting facility build a new dedicated server for me and looking
>>>>>>>> at the dmesg i see:
>>>>>>>>
>>>>>>>> mfi0: <LSI MegaSAS 1078> port 0xec00-0xecff mem
>>>>>>>> 0xfc480000-0xfc4bffff,0xfc440000-0xfc47ffff irq 16 at device 0.0
>>>>>>>> on pci1
>>>>>>>> mfi0: Megaraid SAS driver Ver 2.00
>>>>>>>>
>>>>>>>> for df i get:
>>>>>>>> Filesystem       Size    Used   Avail Capacity  Mounted on
>>>>>>>> /dev/mfid0s1a    496M    197M    259M    43%    /
>>>>>>>> devfs            1.0K    1.0K      0B   100%    /dev
>>>>>>>> /dev/mfid0s1e    496M     12K    456M     0%    /tmp
>>>>>>>> /dev/mfid0s1f    661G    636M    608G     0%    /usr
>>>>>>>> /dev/mfid0s1d    8.7G    1.4M    8.0G     0%    /var
>>>>>>>>
>>>>>>>>
>>>>>>>> i asked for raid1. i cant find too much information about the mfi
>>>>>>>> driver. just that it works with freebsd 7.
>>>>>>>>
>>>>>>>>               
>>>>>>> you might want to look at sysutils/megarc and possibly
>>>>>>> sysutils/linux-megamgr so you can more closely monitor/investigate
>>>>>>> your array.
>>>>>>>
>>>>>>> Vince
>>>>>>>
>>>>>>>            
>>>>>>>> i'll keep looking but - has anybody successfully deployed
>>>>>>>> production servers using the LSI MegaSAS 1078 in RAID1 on a very
>>>>>>>> busy web server?
>>>>>>>> is there any loss in performance using that hardware in RAID1?
>>>>>>>> any performance loss in RAID1 at all?
>>>>>>>>
>>>>>>>>
>>>>>>>> thanks...
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> freebsd-questions@freebsd.org mailing list
>>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>>>>>>> To unsubscribe, send any mail to
>>>>>>>> "freebsd-questions-unsubscribe@freebsd.org"
>>>>>>>>               
>>>>>>> _______________________________________________
>>>>>>> freebsd-questions@freebsd.org mailing list
>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>>>>>> To unsubscribe, send any mail to
>>>>>>> "freebsd-questions-unsubscribe@freebsd.org"
>>>>>>>             
>>>>>> _______________________________________________
>>>>>> freebsd-questions@freebsd.org mailing list
>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>>>>> To unsubscribe, send any mail to
>>>>>> "freebsd-questions-unsubscribe@freebsd.org"
>>>>>>           
>>>>> _______________________________________________
>>>>> freebsd-questions@freebsd.org mailing list
>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>>>> To unsubscribe, send any mail to
>>>>> "freebsd-questions-unsubscribe@freebsd.org"
>>>>>         
>>>> _______________________________________________
>>>> freebsd-questions@freebsd.org mailing list
>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>>> To unsubscribe, send any mail to
>>>> "freebsd-questions-unsubscribe@freebsd.org"
>>>>       
>>
>>   
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "freebsd-questions-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48486868.30900>