Date: Thu, 08 Nov 2018 08:39:34 -0700 From: Ian Lepore <ian@freebsd.org> To: Eugene Grosbein <eugen@grosbein.net>, Jordan Caraballo <jordancaraballo87@gmail.com>, freebsd-stable@freebsd.org, freebsd-questions@freebsd.org Subject: Re: sudo not available after configuring ipmi serial over lan Message-ID: <1541691574.52306.94.camel@freebsd.org> In-Reply-To: <fdf67645-130d-78fd-c3f7-b0d58c6343e5@grosbein.net> References: <CABoP_SQSc2wnJqYXg6AUF1C3_SbyDiLYOa2_0u5oRLcOERZOMg@mail.gmail.com> <fdf67645-130d-78fd-c3f7-b0d58c6343e5@grosbein.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 2018-11-08 at 06:10 +0700, Eugene Grosbein wrote: > 08.11.2018 5:56, Jordan Caraballo wrote: > > > > > Hi guys, > > > > After configuring ipmi serial over lan console, I am not being able > > to > > execute any command related to sudo; not even "sudo su -". I am > > using ttyu0 > > and COM1 on a Dell R530. Everything regarding receiving output and > > typing > > at the serial console is fine; the only command not working is > > sudo. > > > > Any ideas? Below are the configurations. > > > > /etc/ttys > > > > # Serial terminals > > # The 'dialup' keyword identifies dialin lines to login, fingerd > > etc. > > #ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure > > ttyu0 "/usr/libexec/getty std.115200" vt100 on secure > Use network access to perform the following: > > 1) Change "on" to "off" for ttyu0 then run "init q" to apply changes. > 2) Replace "ttyu0" with "cuau0" within same line then run "init q" > again. > > Then retry using console and sudo. The easy way to accomplish the same thing is to change std.115200 to 3wire.115200 (and then do 'init q'). -- Ian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1541691574.52306.94.camel>