Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Feb 2006 23:28:12 +0800
From:      <huangxiangkui@gmail.com>
To:        freebsd-acpi@freebsd.org
Subject:   How can I fix these problems of the asl of my computer?
Message-ID:  <db2035340602160728j3cfcedbt@mail.gmail.com>

next in thread | raw e-mail | index | archive | help
My problem has been send on
http://lists.freebsd.org/pipermail/freebsd-acpi/2006-February/002542.html

I fellow the way by Moore, Robert. on
http://lists.freebsd.org/pipermail/freebsd-acpi/2006-February/002571.html

I use the commond  "iasl acpi.asl" to compile the fixed code of
ACPI.and get below.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D
Intel ACPI Component Architecture
ASL Optimizing Compiler / AML Disassembler version 20041119 [Feb 12 2006]
Copyright (C) 2000 - 2004 Intel Corporation
Supports ACPI Specification Revision 2.0c

ASL Input:  acpi.asl - 5056 lines, 181043 bytes, 2399 keywords
AML Output: DSDT.aml - 23214 bytes 561 named objects 1838 executable opcode=
s

Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 822 Optimizations
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D

And I use commond "cp DSDT.aml /boot/DSDT.aml".to copy the DSDT.aml to boot=
.
And add the next text to the /boot/rc.conf.
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D
acpi_dsdt_load=3D"YES"
acpi_dsdt_name=3D"/boot/DSDT.aml"
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D

But when I reboot the computer.
The FreeBSD also start with the error of acpi.
I use the commond "dmesg" get below.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p4 #0: Sun Feb 12 23:00:51 CST 2006
    root@localhost.my.domain:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <PTLTD          3091  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Sempron(tm) Processor 3000+ (1794.79-MHz 686-class CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0x20fc2  Stepping =3D 2
  Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=3D0x1<SSE3>
  AMD Features=3D0xc2500800<SYSCALL,NX,MMX+,<b25>,3DNow+,3DNow>
real memory  =3D 233766912 (222 MB)
avail memory =3D 219250688 (209 MB)
    ACPI-0377: *** Info: Table [SSDT] replaced by host OS
ACPI: overriding DSDT/SSDT with custom table
    ACPI-0377: *** Info: Table [DSDT] replaced by host OS
ioapic0 <Version 2.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <HP 3091> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
    ACPI-0438: *** Error: Looking up [UPRS] in namespace, AE_NOT_FOUND
SearchNode 0xc14a0440 StartNode 0xc14a0440 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.LNKU._CRS] (Node 0xc14a0440), AE_NOT_FOUND
pci_link8: <ACPI PCI Link LNKU> on acpi0
    ACPI-0438: *** Error: Looking up [UPRS] in namespace, AE_NOT_FOUND
SearchNode 0xc14a0440 StartNode 0xc14a0440 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.LNKU._CRS] (Node 0xc14a0440), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [UPRS] in namespace, AE_NOT_FOUND
SearchNode 0xc14a0480 StartNode 0xc14a0480 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.LNKU._PRS] (Node 0xc14a0480), AE_NOT_FOUND
pci_link8: Unable to parse _CRS or _PRS: AE_NOT_FOUND
device_attach: pci_link8 attach returned 6
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
pci_link8: <ACPI PCI Link LNKU> on acpi0
    ACPI-0438: *** Error: Looking up [UPRS] in namespace, AE_NOT_FOUND
SearchNode 0xc14a0440 StartNode 0xc14a0440 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.LNKU._CRS] (Node 0xc14a0440), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [UPRS] in namespace, AE_NOT_FOUND
SearchNode 0xc14a0480 StartNode 0xc14a0480 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.LNKU._PRS] (Node 0xc14a0480), AE_NOT_FOUND
pci_link8: Unable to parse _CRS or _PRS: AE_NOT_FOUND
device_attach: pci_link8 attach returned 6
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xd0000000-0xd0000fff irq
19 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xd0001000-0xd0001fff irq
19 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0002000-0xd0002fff
irq 19 at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: (0x1002) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f at device 20.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci5: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem
0xd0206000-0xd02060ff irq 18 at device 0.0 on pci5
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:16:36:18:10:9f
cbb0: <PCI-CardBus Bridge> at device 9.0 on pci5
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem
0xd0206800-0xd0206fff,0xd0200000-0xd0203fff irq 22 at device 9.2 on
pci5
fwohci0: OHCI version 1.10 (ROM=3D1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:85:7a:e2
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:85:7a:e2
fwe0: Ethernet address: 02:c0:9f:85:7a:e2
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc000ffc0, gen=3D2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
pci5: <mass storage> at device 9.3 (no driver attached)
pci5: <base peripheral> at device 9.4 (no driver attached)
pci0: <multimedia, audio> at device 20.5 (no driver attached)
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
pci_link8: <ACPI PCI Link LNKU> on acpi0
    ACPI-0438: *** Error: Looking up [UPRS] in namespace, AE_NOT_FOUND
SearchNode 0xc14a0440 StartNode 0xc14a0440 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.LNKU._CRS] (Node 0xc14a0440), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [UPRS] in namespace, AE_NOT_FOUND
SearchNode 0xc14a0480 StartNode 0xc14a0480 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.LPC0.LNKU._PRS] (Node 0xc14a0480), AE_NOT_FOUND
pci_link8: Unable to parse _CRS or _PRS: AE_NOT_FOUND
device_attach: pci_link8 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcffff,0xd0000-0xd0fff,0xdc000-0xdffff,0xe0000-0xe3fff on
isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB Receiver, rev 1.10/20.10, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
Timecounter "TSC" frequency 1794790862 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38154MB <TOSHIBA MK4025GAS KA101A> at ata0-master UDMA100
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.02> at ata1-master PIO4
Trying to mount root from ufs:/dev/ad0s3a
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
disabled, default to deny, logging disabled
umass0: Ramaxel FlashDisk, rev 1.00/1.00, addr 3
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Ramaxel FlashDisk 1.04> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 15MB (32000 512 byte sectors: 64H 32S/T 15C)
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D


I don't know why it is error again?Please Help me!!!
Wait you.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?db2035340602160728j3cfcedbt>