From owner-freebsd-hardware  Fri Aug  2 23:48:33 1996
Return-Path: owner-hardware
Received: (from root@localhost)
          by freefall.freebsd.org (8.7.5/8.7.3) id XAA05521
          for hardware-outgoing; Fri, 2 Aug 1996 23:48:33 -0700 (PDT)
Received: from Kryten.nina.com (dyn051-gnv.51.fdt.net [205.229.51.52])
          by freefall.freebsd.org (8.7.5/8.7.3) with ESMTP id XAA05499
          for <freebsd-hardware@freebsd.org>; Fri, 2 Aug 1996 23:48:17 -0700 (PDT)
Received: from localhost (frankd@localhost) by Kryten.nina.com (8.7.5/8.6.12) with SMTP id CAA23289; Sat, 3 Aug 1996 02:44:14 -0400 (EDT)
X-Authentication-Warning: Kryten.nina.com: frankd owned process doing -bs
Date: Sat, 3 Aug 1996 02:44:13 -0400 (EDT)
From: Frank Seltzer <frankd@yoda.fdt.net>
X-Sender: frankd@Kryten.nina.com
To: "Rodney W. Grimes" <rgrimes@GndRsh.aac.dev.com>
cc: freebsd-hardware@freebsd.org
Subject: Re: Parity errors during install
In-Reply-To: <199608030637.XAA03798@GndRsh.aac.dev.com>
Message-ID: <Pine.BSI.3.95.960803024203.22171D-100000@Kryten.nina.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-hardware@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk

On Fri, 2 Aug 1996, Rodney W. Grimes wrote:

> Built in yes, enabled by default on the 2940 (it's easy enough to check
> this one, it is right in the SCSIselect menus), disabled by default
> on the MC4421 (the manual is wrong, everyone of these I have seen comes
> with the termination disabled).  W4 should be installed to enable termination,
> just in case you don't have the manual handy.

Right now I have jumpers on;

	W4 - Interface termination
	W3 - +5v to bus
	W1 - Term power from drive

Is this correct?

> Rod Grimes                                      rgrimes@gndrsh.aac.dev.com
> Accurate Automation Company                 Reliable computers for FreeBSD
> 

Frank
--
Only in America can a homeless veteran sleep in a cardboard box while a 
draft dodger sleeps in the White House.    <unknown>