Date: Tue, 18 Feb 2003 16:15:18 -0800 (PST) From: Brian Buchanan <brian@ncircle.com> To: <freebsd-hackers@freebsd.org> Subject: Tyan S4520 GCHE Message-ID: <20030218155841.V94954-100000@mail.ncircle.com>
next in thread | raw e-mail | index | archive | help
I'm having problems getting SMP to work on a Tyan S4520 Thunder GCHE
motherboard with 4x 1.9GHz Xeon processors:
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
Programming 16 pins in IOAPIC #2
AP #1 (PHY# 2) failed!
panic y/n? [y] AP #2 (PHY# 4) failed!
panic y/n? [y] AP #3 (PHY# 6) failed!
panic y/n? [y]
This is under FreeBSD 4.7-RELEASE. I also tried a recent -STABLE build
and 5.0-RELEASE, with the same results.
I've attached the "mptable -dmesg" output in the hopes that someone with
more SMP knowledge might be able to give me some information as to what's
wrong. Any help is much appreciated.
Brian
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f7450
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x36
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x0009f170
signature: 'PCMP'
base table length: 428
version: 1.4
checksum: 0x54
OEM ID: 'RCC '
Product ID: 'GCHE SERVER '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 42
local APIC address: 0xfee00000
extended table length: 304
extended table checksum: 242
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x14 BSP, usable 15 2 2 0x3febfbff
2 0x14 AP, usable 15 2 2 0x3febfbff
4 0x14 AP, usable 15 2 2 0x3febfbff
6 0x14 AP, usable 15 2 2 0x3febfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 PCI
4 PCI
5 PCI
6 PCI
7 PCI
8 PCI
9 PCI
10 PCI
11 ISA
--
I/O APICs: APIC ID Version State Address
8 0x11 usable 0xfec00000
9 0x11 usable 0xfec01000
10 0x11 usable 0xfec02000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 11 0 8 0
INT active-hi edge 11 1 8 1
INT active-hi edge 11 0 8 2
INT active-hi edge 11 3 8 3
INT active-hi edge 11 4 8 4
INT active-hi edge 11 5 8 5
INT active-hi edge 11 6 8 6
INT active-hi edge 11 7 8 7
INT active-hi edge 11 8 8 8
INT active-hi edge 11 9 8 9
INT active-hi edge 11 10 8 10
INT active-hi edge 11 11 8 11
INT active-hi edge 11 12 8 12
INT active-hi edge 11 13 8 13
INT active-hi edge 11 14 8 14
INT active-hi edge 11 15 8 15
INT active-lo level 0 10:A 10 13
INT active-lo level 0 11:A 10 14
INT active-lo level 0 12:A 10 15
INT active-lo level 7 9:A 10 3
INT active-lo level 7 9:B 10 4
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 11 0 255 0
NMI active-hi edge 11 0 255 1
-------------------------------------------------------------------------------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x3000
--
System Address Space
bus ID: 1 address type: I/O address
address base: 0x3000
address range: 0x3000
--
System Address Space
bus ID: 4 address type: I/O address
address base: 0x6000
address range: 0x3000
--
System Address Space
bus ID: 7 address type: I/O address
address base: 0x9000
address range: 0x3000
--
System Address Space
bus ID: 9 address type: I/O address
address base: 0xc000
address range: 0x3000
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0xf000
address range: 0x1000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0x40000000
address range: 0xba000000
--
System Address Space
bus ID: 1 address type: memory address
address base: 0xfa000000
address range: 0x200000
--
System Address Space
bus ID: 4 address type: memory address
address base: 0xfa200000
address range: 0x200000
--
System Address Space
bus ID: 7 address type: memory address
address base: 0xfa400000
address range: 0x400000
--
System Address Space
bus ID: 9 address type: memory address
address base: 0xfa800000
address range: 0x200000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfaa00000
address range: 0x4400000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xfee01000
address range: 0x11ff000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x20000
--
Bus Heirarchy
bus ID: 11 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000001
-------------------------------------------------------------------------------
dmesg output:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Thu Feb 13 06:25:15 GMT 2003
brian@grandchampion.eng.ncircle.com:/usr/src/sys/compile/CHAMPION
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium 4 (1899.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf22 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 1073741824 (1048576K bytes)
avail memory = 1042354176 (1017924K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
Programming 16 pins in IOAPIC #2
AP #1 (PHY# 2) failed!
panic y/n? [y] AP #2 (PHY# 4) failed!
panic y/n? [y] AP #3 (PHY# 6) failed!
panic y/n? [y] FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 2, version: 0x00000000, at 0xfee00000
cpu2 (AP): apic id: 4, version: 0x00000000, at 0xfee00000
cpu3 (AP): apic id: 6, version: 0x00000000, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 9, version: 0x000f0011, at 0xfec01000
io2 (APIC): apic id: 10, version: 0x000f0011, at 0xfec02000
Preloaded elf kernel "kernel" at 0xc0339000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #2 intpin 13 -> irq 2
IOAPIC #2 intpin 14 -> irq 16
IOAPIC #2 intpin 15 -> irq 17
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 10.0 irq 2
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2400-0x243f mem 0xf8000000-0xf801ffff,0xf8041000-0xf8041fff irq 16 at device 11.0 on pci0
fxp0: Ethernet address 00:e0:81:23:cb:1a
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x2440-0x247f mem 0xf8020000-0xf803ffff,0xf8042000-0xf8042fff irq 17 at device 12.0 on pci0
fxp1: Ethernet address 00:e0:81:23:cb:1b
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2480-0x248f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <OHCI USB controller> at 15.2 irq 5
isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pcib3: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib4
pcib5: <Host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib5
pcib6: <Host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib6
pcib7: <Host to PCI bridge> on motherboard
IOAPIC #2 intpin 3 -> irq 18
IOAPIC #2 intpin 4 -> irq 19
pci7: <PCI bus> on pcib7
pci7: <unknown card> (vendor=0x9005, dev=0x00cf) at 9.0 irq 18
pci7: <unknown card> (vendor=0x9005, dev=0x00cf) at 9.1 irq 19
pcib8: <Host to PCI bridge> on motherboard
pci8: <PCI bus> on pcib8
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
ata1-slave: ATAPI identify retries exceeded
ad0: 19092MB <ST320014A> [38792/16/63] at ata0-master UDMA100
acd0: CDROM <SR243T> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying
ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying
ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) retrying
ad0: UDMA ICRC error reading fsbn 0 (ad0 bn 0; cn 0 tn 0 sn 0) falling back to PIO mode
ohci0: <OHCI (generic) USB controller> mem 0xf8043000-0xf8043fff irq 5 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
===============================================================================
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030218155841.V94954-100000>