Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 26 Mar 2008 18:53:33 +0100
From:      "Wouter Oosterveld" <wouter@fizzyflux.nl>
To:        freebsd-questions@freebsd.org, "Fabio Pennati" <fabiopnn@tele2.it>
Subject:   Re: USB Mouse not working
Message-ID:  <b4950de90803261053q62ef8db8td2468d9158b29753@mail.gmail.com>
In-Reply-To: <web-1108294@mailbe04.swip.net>
References:  <web-1108294@mailbe04.swip.net>

next in thread | previous in thread | raw e-mail | index | archive | help
I've had probably had the same issues with an logitech wheel-mouse (usb):

Mar 24 23:56:55 harare kernel: ums0: 3 buttons and Z dir.

The following xorg-section without any rc.conf moosed stuff got it to work:

Section "InputDevice"
 Identifier  "Mouse1"
 Option "Protocol"    "auto"
 Option "Device"      "/dev/sysmouse"
 Option "Buttons" "5"
 Option "ZAxisMapping"   "4 5"
EndSection

Hope this helps.

Regards,

Wouter

2008/3/26, Fabio Pennati <fabiopnn@tele2.it>:
>
>    I am a new FreeBSD user coming from Gentoo. I am not able to get
>    working an usb optical  wired mouse from Labtec that is working well
>    with many Linux distro's and WXP too.
>    I am using a FreeBSD 7.0 standard GENERIC kernel configuration with
>    all usb devices installed, thus:
>
>      # USB support
>      device        uhci        # UHCI PCI->USB interface
>      device        ohci        # OHCI PCI->USB interface
>      device        ehci        # EHCI PCI->USB interface (USB 2.0)
>      device        usb        # USB Bus (required)
>      #device        udbp        # USB Double Bulk Pipe devices
>      device        ugen        # Generic
>      device        uhid        # "Human Interface Devices"
>      device        ukbd        # Keyboard
>      device        ulpt        # Printer
>      device        umass        # Disks/Mass storage - Requires scbus
>      and da
>      device        ums        # Mouse
>
>    Here is an extract from my rc.conf:
>
>      usbd_enable="YES"
>      moused_enable="YES"
>      moused_type="auto"
>      moused_port="/dev/ums0"
>      moused_flags=""
>      usbd_flags=""
>      moused_nondefault_enable="YES"
>      moused_ums0_flags=""
>
>    I tried also to take out from rc.conf any "moused-stuff" lines but
>    without no results.
>    And here is the messages from kernel during boot, probing ums device:
>
>      ums0: <vendor 0x1241 product 0x1111, class 0/0, rev 1.00/1.00, addr
>      2> on uhub0
>      ums0: 3 buttons and Z dir.
>
>    This is the xorg.conf, for the part interesting the mouse:
>
>      Section "InputDevice"
>          Identifier  "Mouse0"
>          Driver      "mouse"
>          Option        "Protocol" "Auto"
>          Option        "Device" "/dev/sysmouse"
>          Option        "ZAxisMapping" "4 5 6 7"
>      EndSection
>
>    Furthermore I installed the same mouse with an hw adapter to the
>    serial port of the PC and obviously it works, of course as pms device,
>    but very slowly and with no precision.
>    There is someone that has any idea ?
>    Thanks, Fabio
>  _______________________________________________
>  freebsd-questions@freebsd.org mailing list
>  http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>  To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b4950de90803261053q62ef8db8td2468d9158b29753>