Date: Fri, 08 Nov 2002 19:46:18 +0100 From: Stephan Holtwisch <sh@immutec.com> To: freebsd-current@freebsd.org Subject: CF-PCMCIA Adapter + CF-Card Message-ID: <5.1.0.14.1.20021108154305.04acbdf0@proxy.immutec.com>
next in thread | raw e-mail | index | archive | help
Hi, i had a similar problem as reported by Tomi Vainio on 27.09.2002 with a CF-PCMCIA Adapter and a Sandisk 64MB CF Card with NEWCARD on a - -current of ~ 20.09.2002: (This is a Thinkpad X20) pccard0: Allocation failed for cfe 0 ata2 at port 0x100-0x10f irq 11 function 0 config 1 on pccard0 pccard0: WARNING: Resource not reserved by pccard bus device_probe_and_attach: ata2 attach returned 6 On todays Current i get on Insertion: pccard0: Allocation failed for cfe 0 ata2 at port 0x100-0x10f irq 11 function 0 config 1 on pccard0 ad4: 61MB <SanDisk SDCFB-64> [490/8/32] at ata2-master BIOSPIO On todays Current i get on Boot: pccard0: Allocation failed for cfe 0 ata2 at port 0x100-0x10f irq 11 function 0 config 1 on pccard0 ad0: 19077MB <HITACHI_DK23BA-20B> [41344/15/63] at ata0-master UDMA33 ad4: READ command timeout tag=3D0 serv=3D0 - resetting ata2: resetting devices .. done ad4: read interrupt arrived early ad4: read error detected (too) late ad4: <SanDisk SDCFB-64> [490/8/32] at ata2-master BIOSPIO ad4: hard error cmd=3Dread fsbn 104458130 of 0-3 status=3D51 error=3D10 ad4: 51004MB <SanDisk SDCFB-64> [21318/70/70] at ata2-master BIOSPIO at that point the kernel hangs :-) If i insert the card after the boot Process i can work on it without any Problems... Stephan - Stephan Holtwisch - sh@immutec.com immutec GmbH - Mendelstra=DFe 11 - 48149 M=FCnster Tel: +49(0)251/980-1230 - Fax: +49(0)251/980-1231 www.immutec.com - info@immutec.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.1.0.14.1.20021108154305.04acbdf0>