Date: Fri, 3 Feb 2006 23:39:42 -0800 (PST) From: Daniel Valencia <fetrovsky@yahoo.com> To: freebsd-hackers@freebsd.org Subject: Re: Problems with SMP in amd64 Message-ID: <20060204073942.72758.qmail@web53913.mail.yahoo.com> In-Reply-To: <20060203211818.34971.qmail@web53901.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I just noticed something... it actually boots well using SMP on 6.0-RELEASE... the problem is when using the last STABLE src Thanks, - Daniel Daniel Valencia <fetrovsky@yahoo.com> wrote: Hello... I've been trying to update my system in the STABLE branch, and every time I install the new kernel, built using SMP, the system won't boot... as I don't know where the problem could be and it doesn't seem to have been fixed, I thought it a good idea to let you guys know... The boot process hangs right after detecting the first SATA disk (a maxtor 250GB, ad4 at ata2) and before acknowledging the second SATA disk (same model, ad6 at ata3). The system boots properly in 6.0-RELEASE using GENERIC. I'm using a Gigabyte motherboard with nForce4 iDNA chipset, and a dualcore athlon64 3800+ processor. The system doesn't boot properly under 6.0-RELEASE using SMP either. Here goes my dmesg... Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Wed Nov 2 19:07:38 UTC 2005 root@rat.samsco.home:/usr/obj/usr/src/sys/GENERIC ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2009.16-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20fb1 Stepping = 1 Features=0x178bfbff Features2=0x1 AMD Features=0xe2500800,LM,3DNow+,3DNow> Hyperthreading: 2 logical CPUs real memory = 939458560 (895 MB) avail memory = 895479808 (853 MB) ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard acpi0: on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR pci_link0: irq 5 on acpi0 pci_link1: irq 5 on acpi0 pci_link2: irq 11 on acpi0 pci_link3: on acpi0 pci_link4: on acpi0 pci_link5: on acpi0 pci_link6: irq 10 on acpi0 pci_link7: on acpi0 pci_link8: irq 10 on acpi0 pci_link9: on acpi0 pci_link10: irq 11 on acpi0 pci_link11: on acpi0 pci_link12: on acpi0 pci_link13: on acpi0 pci_link14: on acpi0 pci_link15: irq 11 on acpi0 pci_link16: irq 5 on acpi0 pci_link17: on acpi0 pci_link18: irq 11 on acpi0 pci_link19: irq 10 on acpi0 pci_link20: irq 0 on acpi0 pci_link21: irq 0 on acpi0 pci_link22: irq 0 on acpi0 pci_link23: irq 0 on acpi0 pci_link24: irq 0 on acpi0 pci_link25: irq 0 on acpi0 pci_link26: irq 0 on acpi0 pci_link27: irq 0 on acpi0 pci_link28: irq 0 on acpi0 pci_link29: irq 0 on acpi0 pci_link30: irq 0 on acpi0 pci_link31: irq 0 on acpi0 pci_link32: irq 0 on acpi0 pci_link33: irq 0 on acpi0 pci_link34: irq 0 on acpi0 pci_link35: irq 0 on acpi0 pci_link36: irq 0 on acpi0 pci_link37: irq 0 on acpi0 pci_link38: irq 0 on acpi0 pci_link39: irq 0 on acpi0 pci_link40: irq 0 on acpi0 ACPI-0501: *** Error: Handler for [SystemMemory] returned AE_AML_ALIGNMENT ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff0000aa9dc0), AE_AML_ALIGNMENT ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff0000aa9dc0), AE_AML_ALIGNMENT can't fetch resources for \\_SB_.MEM_ - AE_AML_ALIGNMENT cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci_link35: BIOS IRQ 11 for -2145774616.10.INTA is invalid pci_link28: BIOS IRQ 10 for -2145774616.11.INTA is invalid pci_link36: BIOS IRQ 5 for -2145774616.11.INTB is invalid pci_link30: BIOS IRQ 11 for -2145774616.20.INTA is invalid pci_link39: BIOS IRQ 11 for -2145774616.14.INTA is invalid pci_link40: BIOS IRQ 10 for -2145774616.15.INTA is invalid pci_link26: BIOS IRQ 10 for -2145774616.5.INTA is invalid pci0: on pcib0 pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) pci0: at device 0.2 (no driver attached) pci0: at device 0.3 (no driver attached) pci0: at device 0.4 (no driver attached) pci0: at device 0.5 (no driver attached) pci0: at device 0.6 (no driver attached) pci0: at device 0.7 (no driver attached) pci0: at device 5.0 (no driver attached) pci0: at device 9.0 (no driver attached) isab0: at device 10.0 on pci0 isa0: on isab0 pci0: at device 10.1 (no driver attached) pci0: at device 10.2 (no driver attached) ohci0: mem 0xf5104000-0xf5104fff irq 21 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0: mem 0xf5100000-0xf51000ff irq 22 at device 11.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 13.0 on pci0 ata0: on atapci0 ata1: on atapci0 atapci1: port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xf5103000-0xf5103fff irq 23 at device 14.0 on pci0 ata2: on atapci1 ata3: on atapci1 atapci2: port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xf5102000-0xf5102fff irq 20 at device 15.0 on pci0 ata4: on atapci2 ata5: on atapci2 pcib1: at device 16.0 on pci0 pci1: on pcib1 rl0: port 0xa000-0xa0ff mem 0xf5000000-0xf50000ff irq 16 at device 6.0 on pci1 miibus0: on rl0 rlphy0: on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:40:f4:cd:f6:74 pci1: at device 7.0 (no driver attached) fwohci0: port 0xa800-0xa87f mem 0xf5001000-0xf50017ff irq 18 at device 14.0 on pci1 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:14:85:00:36:63:1b fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:00:14:36:63:1b fwe0: Ethernet address: 02:00:14:36:63:1b fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci0: at device 20.0 (no driver attached) fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: at iomem 0xd0000-0xd3fff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Microsoft Basic Optical Mouse, rev 1.10/0.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ugen0: vendor 0x046d product 0x08b2, rev 1.10/0.00, addr 3 Timecounter "TSC" frequency 2009158085 Hz quality 800 Timecounters tick every 1.000 msec acd0: DVDR at ata0-master UDMA33 acd1: CDRW at ata0-slave UDMA33 ad4: 239371MB at ata2-master UDMA33 ad6: 239372MB at ata3-master UDMA33 Trying to mount root from ufs:/dev/ad4s2a rl0: link state changed to UP __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ freebsd-hackers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org" __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060204073942.72758.qmail>