From owner-freebsd-stable  Wed Aug 19 06:54:43 1998
Return-Path: <owner-freebsd-stable@FreeBSD.ORG>
Received: (from majordom@localhost)
          by hub.freebsd.org (8.8.8/8.8.8) id GAA14326
          for freebsd-stable-outgoing; Wed, 19 Aug 1998 06:54:43 -0700 (PDT)
          (envelope-from owner-freebsd-stable@FreeBSD.ORG)
Received: from is2.net.ohio-state.edu (is2.net.ohio-state.edu [128.146.48.9])
          by hub.freebsd.org (8.8.8/8.8.8) with SMTP id GAA14311
          for <freebsd-stable@freebsd.org>; Wed, 19 Aug 1998 06:54:40 -0700 (PDT)
          (envelope-from maf@dev1.net.ohio-state.edu)
Received: (qmail 1168 invoked from network); 19 Aug 1998 13:54:00 -0000
Received: from dev1.net.ohio-state.edu (128.146.222.3)
  by is2.net.ohio-state.edu with SMTP; 19 Aug 1998 13:54:00 -0000
Received: (qmail 20408 invoked by uid 4454); 19 Aug 1998 13:53:59 -0000
Message-ID: <19980819095359.A20393@net.ohio-state.edu>
Date: Wed, 19 Aug 1998 09:53:59 -0400
From: Mark Fullmer <maf@net.ohio-state.edu>
To: freebsd@magnet.geophysik.tu-freiberg.de
Cc: freebsd-stable@FreeBSD.ORG
Subject: Re: Answering myself, was: URGENT! ASUS P2B/LS supported ?
References: <19980728120553.A22817@net.ohio-state.edu> <199807291334.PAA06279@magnet.geophysik.tu-freiberg.de>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Mailer: Mutt 0.91i
In-Reply-To: <199807291334.PAA06279@magnet.geophysik.tu-freiberg.de>; from Holm Tiffe on Wed, Jul 29, 1998 at 03:34:59PM +0200
X-Mutt-References: <199807291334.PAA06279@magnet.geophysik.tu-freiberg.de>
Sender: owner-freebsd-stable@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.ORG

On Wed, Jul 29, 1998 at 03:34:59PM +0200, Holm Tiffe wrote:
> > On Tue, Jul 28, 1998 at 01:08:58PM +0200, Holm Tiffe wrote:
> [..]
> > 
> > This is -stable around the 2.2.7 branch, not current.  The pci code
> > has changed quite a bit in -current.
> > 
> > chip2 <Intel 82371AB PCI-ISA bridge> rev 2 on pci0:4:0
> > chip3 <Intel 82371AB IDE interface> rev 1 on pci0:4:1
> > chip4 <Intel 82371AB USB interface> rev 1 int d irq 12 on pci0:4:2
> > chip5 <Intel 82371AB Power management controller> rev 2 on pci0:4:3
> > ahc0 <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0 int a irq 12 on pci0:6:0
> > pci_map_mem failed: bad memory type=0xfffff004
> > ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 32/255 SCBs
> > fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 5 int a irq 10 on pci0:7:0
> avail memory = 259104768 (253032K bytes)
> Probing for devices on PCI bus 0:
> chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
> chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
> chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
> chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 255 on pci0.4.2
> chip4: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
> ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 15 on pci0.6.0
> ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 32/255 SCBs
> fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 10 on pci0.7.0
> fxp0: Ethernet address 00:e0:18:90:2b:8f
> 
> This is from my dmesg output. You are sure, that you have used the cam-drivers?
> [yeah, I know, a stupid question] (I've never tryed to use the old drivers)
> Have we the same revision of the host to pci bridge ?

It's a -stable problem, not -current.  I do have the CAM patches applied, but
that shouldn't matter.

--
mark

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message