Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 30 Nov 2012 18:22:46 +0100
From:      Mats Mellstrand <mats@exmandato.se>
To:        Daisuke Aoyama <aoyama@peach.ne.jp>
Cc:        freebsd-arm@freebsd.org
Subject:   Re: FreeBSD on Raspberry Pi 512MB (with U-Boot + ubldr)
Message-ID:  <67266790-55B9-4CAB-992B-A68C73912995@exmandato.se>
In-Reply-To: <C956325DD85D4E1E9739709F94FEEA76@ad.peach.ne.jp>
References:  <3988C1622A974F19A9D3888F0334FF10@ad.peach.ne.jp> <EDA5788A-A74B-47A5-88C7-4CAD9B572EE2@exmandato.se> <D0C85770-572C-492D-82A4-7CB19F114F01@bluezbox.com> <C956325DD85D4E1E9739709F94FEEA76@ad.peach.ne.jp>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi



On 30 nov 2012, at 17:53, Daisuke Aoyama <aoyama@peach.ne.jp> wrote:

> Hi,
>=20
>>> uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on =
usbus0
>>> mmcsd0: 14GB <SDHC SD16G 8.0 SN 53686086 MFG 08/2012 by 3 SD> at =
mmc0 25.0MHz/4bit/65535-block
>>> mmcsd0: Error indicated: 2 Bad CRC
>>> mmcsd0: Error indicated: 2 Bad CRC
>>=20
>> This issue must be fixed by r243688 and r243689
>=20
> It seems fixed. But found another problem. SWAP never used even if I =
set GPU=3D384MB.
> Also, around freemem=3D260MB(GPU=3D16MB), get the program crashed.
>=20
>=20
> I've recreated the image based on build-pi-image.sh + SVN 243703 + my =
custom settings.
> All settings are the same as previous mail. (FreeBSD source tree is =
not modified)
> Please try this instead.

Success!

I tried ifconfig_ue0=3D"DHCP" in /etc/rc.local, this however don't work:

This gives :

/etc/rc.d/dhclient: WARNING: failed to start dhclient

in the boot message

But I can start dhclient manually after boot.

/mm


>=20
> You can try my test version from:
> http://www.peach.ne.jp/archives/rpi/freebsd-pi-20121201.img.gz
>=20
> SHA256 (freebsd-pi-20121130.img.gz) =3D =
a4159301e2d7564ef065aa4c3d6afaef3284cc3ace1ae7c146aaea9e18ec0457
> SHA256 (freebsd-pi-20121201.img.gz) =3D =
7a0b8bcda7f70c39b259811c12854fcf856af7e18436e9beb0c2fa25a7fdb0e0
>=20
> Using config is here:
> http://www.peach.ne.jp/archives/rpi/config/RPI-B-test3
>=20
> --=20
> Daisuke Aoyama=20




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?67266790-55B9-4CAB-992B-A68C73912995>