Date: Fri, 12 Dec 2008 21:27:27 +0100 (CET) From: Oliver Fromme <olli@lurza.secnetix.de> To: freebsd-current@FreeBSD.ORG, freebsd-usb@FreeBSD.ORG Subject: usb2 + scanner HP ScanJet 4300C Message-ID: <200812122027.mBCKRRZt011007@lurza.secnetix.de>
next in thread | raw e-mail | index | archive | help
Hi, I've got a HP ScanJet 4300C that seems to be a little bit stubborn. It doesn't work with the old USB code, so I updated to 8-current and compiled a kernel with the new usb2 drivers. Now I get: usb2_alloc_device:1590: Failure selecting configuration index 0: USB_ERR_TIMEOUT, port 2, addr 2 ugen0.2: <Hewlett Packard> at usbus0 uhub_reattach_port:402: could not allocate new device! "usbconfig list" says: ugen0.1: <OHCI root HUB nVidia> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <EHCI root HUB nVidia> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON Is there anything I can do, except for forgetting about this scanner alltogether? (The scanner does have an LPT connector, but the computer does not. I assume that the scanner wouldn't work with a USB-printer adapter either, because SANE probably only works with "real" LPT ports.) Best regards Oliver -- Oliver Fromme, secnetix GmbH & Co. KG, Marktplatz 29, 85567 Grafing b. M. Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung: secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün- chen, HRB 125758, Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf Gebhart FreeBSD-Dienstleistungen, -Produkte und mehr: http://www.secnetix.de/bsd "One of the main causes of the fall of the Roman Empire was that, lacking zero, they had no way to indicate successful termination of their C programs." -- Robert Firth
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200812122027.mBCKRRZt011007>