Date: Wed, 26 Mar 2008 18:56:06 +0100 From: "Wouter Oosterveld" <wouter@fizzyflux.nl> To: freebsd-questions@freebsd.org, "Fabio Pennati" <fabiopnn@tele2.it> Subject: Re: USB Mouse not working Message-ID: <b4950de90803261056id33054bu52eaa7efef93a520@mail.gmail.com> In-Reply-To: <b4950de90803261053q62ef8db8td2468d9158b29753@mail.gmail.com> References: <web-1108294@mailbe04.swip.net> <b4950de90803261053q62ef8db8td2468d9158b29753@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Forgot "Driver": Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "Buttons" "5" Option "ZAxisMapping" "4 5" EndSection 2008/3/26, Wouter Oosterveld <wouter@fizzyflux.nl>: > I've had probably had the same issues with an logitech wheel-mouse (usb): > > Mar 24 23:56:55 harare kernel: ums0: 3 buttons and Z dir. > > The following xorg-section without any rc.conf moosed stuff got it to work: > > Section "InputDevice" > Identifier "Mouse1" > > Option "Protocol" "auto" > Option "Device" "/dev/sysmouse" > > Option "Buttons" "5" > Option "ZAxisMapping" "4 5" > EndSection > > Hope this helps. > > Regards, > > Wouter > > 2008/3/26, Fabio Pennati <fabiopnn@tele2.it>: > > > > > I am a new FreeBSD user coming from Gentoo. I am not able to get > > working an usb optical wired mouse from Labtec that is working well > > with many Linux distro's and WXP too. > > I am using a FreeBSD 7.0 standard GENERIC kernel configuration with > > all usb devices installed, thus: > > > > # USB support > > device uhci # UHCI PCI->USB interface > > device ohci # OHCI PCI->USB interface > > device ehci # EHCI PCI->USB interface (USB 2.0) > > device usb # USB Bus (required) > > #device udbp # USB Double Bulk Pipe devices > > device ugen # Generic > > device uhid # "Human Interface Devices" > > device ukbd # Keyboard > > device ulpt # Printer > > device umass # Disks/Mass storage - Requires scbus > > and da > > device ums # Mouse > > > > Here is an extract from my rc.conf: > > > > usbd_enable="YES" > > moused_enable="YES" > > moused_type="auto" > > moused_port="/dev/ums0" > > moused_flags="" > > usbd_flags="" > > moused_nondefault_enable="YES" > > moused_ums0_flags="" > > > > I tried also to take out from rc.conf any "moused-stuff" lines but > > without no results. > > And here is the messages from kernel during boot, probing ums device: > > > > ums0: <vendor 0x1241 product 0x1111, class 0/0, rev 1.00/1.00, addr > > 2> on uhub0 > > ums0: 3 buttons and Z dir. > > > > This is the xorg.conf, for the part interesting the mouse: > > > > Section "InputDevice" > > Identifier "Mouse0" > > Driver "mouse" > > Option "Protocol" "Auto" > > Option "Device" "/dev/sysmouse" > > Option "ZAxisMapping" "4 5 6 7" > > EndSection > > > > Furthermore I installed the same mouse with an hw adapter to the > > serial port of the PC and obviously it works, of course as pms device, > > but very slowly and with no precision. > > There is someone that has any idea ? > > Thanks, Fabio > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > > > -- [ wouter@berenboot.xs4all.nl is binnenkort niet meer, wouter@fizzyflux.nl is mijn nieuwe email-adres. ]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b4950de90803261056id33054bu52eaa7efef93a520>