Date: Tue, 8 Apr 2003 15:39:32 -0600 From: Sean Page <Sean.Page@epsb.ca> To: freebsd-questions@freebsd.org Subject: RE: Why has my swap pager gone nuts? Message-ID: <ADEDBE1A539BD311907A00508B1349370D5AB0EA@EXCHANGE06>
next in thread | raw e-mail | index | archive | help
For what it's worth, I have two 4.8 (RELEASE) Servers that run out of memory and core out of Perl every time I do a "make index" inside /usr/ports. (Which didn't happen in 4.7) Could it be related? Here's the specs on one of them: CPU states: 0.0% user, 0.0% nice, 0.0% system, 1.9% interrupt, 98.1% idle Mem: 98M Active, 26M Inact, 39M Wired, 28K Cache, 41M Buf, 148M Free Swap: 576M Total, 576M Free Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.8-RELEASE #11: Mon Apr 7 13:58:59 MDT 2003 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (267.27-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x633 Stepping = 3 Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,M MX> real memory = 335544320 (327680K bytes) avail memory = 322383872 (314828K bytes) Preloaded elf kernel "kernel" at 0xc03af000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00f0cc0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 12 at device 4.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0 xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xe1000000-0xe100007f irq 10 at device 10.0 on pci0 xl0: Ethernet address: 00:10:4b:62:1b:59 miibus0: <MII bus> on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <ATI Mach64-GV graphics accelerator> at 12.0 irq 11 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 200 packets/entr y by default ad0: 9773MB <FUJITSU MPF3102AT> [19857/16/63] at ata0-master UDMA33
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ADEDBE1A539BD311907A00508B1349370D5AB0EA>