From owner-freebsd-questions@FreeBSD.ORG Mon Jul 20 02:14:21 2009 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 4EFC8106564A for ; Mon, 20 Jul 2009 02:14:21 +0000 (UTC) (envelope-from 102@numbersgroup.com) Received: from vh3.movaci.net (vh3.movaci.net [58.137.156.34]) by mx1.freebsd.org (Postfix) with ESMTP id B323B8FC19 for ; Mon, 20 Jul 2009 02:14:19 +0000 (UTC) (envelope-from 102@numbersgroup.com) Received: (qmail 16647 invoked from network); 20 Jul 2009 08:47:36 +0700 Received: from www.movaci.com (HELO ?10.10.10.67?) (58.137.156.54) by www.movaci.com with SMTP; 20 Jul 2009 08:47:35 +0700 From: 102 <102@numbersgroup.com> To: freebsd-questions@freebsd.org Date: Mon, 20 Jul 2009 11:48:19 +1000 Message-Id: <1248054499.13203.21.camel@galvatron> Mime-Version: 1.0 X-Mailer: Evolution 2.26.1 Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Problem with External USB HDD "device problem (SET_ADDR_FAILED) disabling port" X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 20 Jul 2009 02:14:21 -0000 Hello All, When attempting to connect an external USB chassis (have tried several) I am running into the following error "uhub4: device problem (SET_ADDR_FAILED): disabling port 3". The exact uhub and port id changes according to the usb port the device is connected to but the general error remains the same. I have searched around everywhere I can looking for a solution but cannot find one that is a.) my exact error, and b.) able to be tested. I'm running a Dell 2950III server with 6x RAID0 - each array consisting of 1 drive. The system is running FreeBSD 7.2 with a zfs raidz2 pool. When I try to disable ACPI as some people have suggested on other threads with similar problems, zfs will not boot at all. Besides I'm using ACPI for several other things and wouldn't want it to be disabled anyway. Anyway I'm up for suggestions so if anybody can please help it will be greatly appreciated. I have a whole bunch of data to move and really don't want to copy it over the wire. I've included as many outputs as I can think of, if there are any suggestions at all, I'm open to them. Thanks in advance. uname -v output: FreeBSD 7.2-RELEASE #0: Fri May 1 07:18:07 UTC 2009 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC dmesg output: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE #0: Fri May 1 07:18:07 UTC 2009 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(R) CPU E5420 @ 2.50GHz (2496.28-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Stepping = 10 Features=0xbfebfbff Features2=0x40ce3bd,XSAVE> AMD Features=0x20100800 AMD Features2=0x1 Cores per package: 4 usable memory = 6423498752 (6125 MB) avail memory = 6188474368 (5901 MB) ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ ioapic0: Changing APIC ID to 4 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 2.0 on pci0 pci4: on pcib1 pcib2: at device 0.0 on pci4 pci5: on pcib2 pcib3: at device 0.0 on pci5 pci6: on pcib3 pcib4: at device 1.0 on pci5 pci8: on pcib4 pcib5: at device 0.3 on pci4 pci9: on pcib5 pcib6: at device 3.0 on pci0 pci1: on pcib6 mfi0: port 0xec00-0xecff mem 0xfc680000-0xfc6bffff,0xfc640000-0xfc67ffff irq 16 at device 0.0 on pci1 mfi0: Megaraid SAS driver Ver 3.00 mfi0: 4027 (301144203s/0x0020/info) - Shutdown command received from host mfi0: 4028 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) mfi0: 4029 (boot + 3s/0x0020/info) - Firmware version 1.21.02-0528 mfi0: 4030 (boot + 3s/0x0008/info) - Battery Present mfi0: 4031 (boot + 3s/0x0020/info) - Controller hardware revision ID (0x0) mfi0: 4032 (boot + 3s/0x0020/info) - Package version 6.1.1-0047 mfi0: 4033 (boot + 3s/0x0020/info) - Board Revision mfi0: 4034 (boot + 10s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored mfi0: 4035 (boot + 11s/0x0002/info) - Inserted: Encl PD 20 mfi0: 4036 (boot + 11s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=50024080682ba500,0000000000000000 mfi0: 4037 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) mfi0: 4038 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=1221000000000000,0000000000000000 mfi0: 4039 (boot + 11s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive mfi0: 4040 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) mfi0: 4041 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=1221000001000000,0000000000000000 mfi0: 4042 (boot + 11s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive mfi0: 4043 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) mfi0: 4044 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 mfi0: 4045 (boot + 11s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive mfi0: 4046 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) mfi0: 4047 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 mfi0: 4048 (boot + 11s/0x0002/WARN) - PD 03(e0x20/s3) is not a certified drive mfi0: 4049 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) mfi0: 4050 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=1221000004000000,0000000000000000 mfi0: 4051 (boot + 11s/0x0002/WARN) - PD 04(e0x20/s4) is not a certified drive mfi0: 4052 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) mfi0: 4053 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=1221000005000000,0000000000000000 mfi0: 4054 (boot + 11s/0x0002/WARN) - PD 05(e0x20/s5) is not a certified drive mfi0: 4055 (boot + 68s/0x0008/info) - Battery temperature is normal mfi0: 4056 (boot + 68s/0x0008/info) - Current capacity of the battery is above threshold mfi0: 4057 (301144311s/0x0020/info) - Time established as 07/17/09 11:11:51; (99 seconds since power on) mfi0: 4058 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) mfi0: 4059 (boot + 3s/0x0020/info) - Firmware version 1.21.02-0528 mfi0: 4060 (boot + 3s/0x0008/info) - Battery Present mfi0: 4061 (boot + 3s/0x0020/info) - Controller hardware revision ID (0x0) mfi0: 4062 (boot + 3s/0x0020/info) - Package version 6.1.1-0047 mfi0: 4063 (boot + 3s/0x0020/info) - Board Revision mfi0: 4064 (boot + 10s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored mfi0: 4065 (boot + 11s/0x0002/info) - Inserted: Encl PD 20 mfi0: 4066 (boot + 11s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=50024080682ba500,0000000000000000 mfi0: 4067 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) mfi0: 4068 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=1221000000000000,0000000000000000 mfi0: 4069 (boot + 11s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive mfi0: 4070 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) mfi0: 4071 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=1221000001000000,0000000000000000 mfi0: 4072 (boot + 11s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive mfi0: 4073 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) mfi0: 4074 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 mfi0: 4075 (boot + 11s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive mfi0: 4076 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) mfi0: 4077 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 mfi0: 4078 (boot + 11s/0x0002/WARN) - PD 03(e0x20/s3) is not a certified drive mfi0: 4079 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) mfi0: 4080 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=1221000004000000,0000000000000000 mfi0: 4081 (boot + 11s/0x0002/WARN) - PD 04(e0x20/s4) is not a certified drive mfi0: 4082 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) mfi0: 4083 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=1221000005000000,0000000000000000 mfi0: 4084 (boot + 11s/0x0002/WARN) - PD 05(e0x20/s5) is not a certified drive mfi0: 4085 (301144363s/0x0020/info) - Time established as 07/17/09 11:12:43; (20 seconds since power on) mfi0: 4086 (301144411s/0x0008/info) - Battery temperature is normal mfi0: 4087 (301144411s/0x0008/info) - Battery started charging mfi0: 4088 (301144411s/0x0008/info) - Current capacity of the battery is above threshold mfi0: 4089 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) mfi0: 4090 (boot + 3s/0x0020/info) - Firmware version 1.21.02-0528 mfi0: 4091 (boot + 3s/0x0008/info) - Battery Present mfi0: 4092 (boot + 3s/0x0020/info) - Controller hardware revision ID (0x0) mfi0: 4093 (boot + 3s/0x0020/info) - Package version 6.1.1-0047 mfi0: 4094 (boot + 3s/0x0020/info) - Board Revision mfi0: 4095 (boot + 10s/0x0002/info) - Unexpected sense: Encl PD 20 Path 50024080682ba500, CDB: 12 00 00 00 04 00, Sense: 6/29/00 mfi0: 4096 (boot + 11s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored mfi0: 4097 (boot + 11s/0x0004/info) - Enclosure PD 20(c None/p0) element (SES code 0x17) status changed mfi0: 4098 (boot + 11s/0x0004/info) - Enclosure PD 20(c None/p0) element (SES code 0x17) status changed mfi0: 4099 (boot + 11s/0x0004/info) - Enclosure PD 20(c None/p0) element (SES code 0x17) status changed mfi0: 4100 (boot + 11s/0x0004/info) - Enclosure PD 20(c None/p0) element (SES code 0x17) status changed mfi0: 4101 (boot + 11s/0x0004/info) - Enclosure PD 20(c None/p0) element (SES code 0x17) status changed mfi0: 4102 (boot + 11s/0x0004/info) - Enclosure PD 20(c None/p0) element (SES code 0x17) status changed mfi0: 4103 (boot + 11s/0x0002/info) - Inserted: Encl PD 20 mfi0: 4104 (boot + 11s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=50024080682ba500,0000000000000000 mfi0: 4105 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) mfi0: 4106 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=1221000000000000,0000000000000000 mfi0: 4107 (boot + 11s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive mfi0: 4108 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) mfi0: 4109 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=1221000001000000,0000000000000000 mfi0: 4110 (boot + 11s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive mfi0: 4111 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) mfi0: 4112 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 mfi0: 4113 (boot + 11s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive mfi0: 4114 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) mfi0: 4115 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 mfi0: 4116 (boot + 11s/0x0002/WARN) - PD 03(e0x20/s3) is not a certified drive mfi0: 4117 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) mfi0: 4118 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=1221000004000000,0000000000000000 mfi0: 4119 (boot + 11s/0x0002/WARN) - PD 04(e0x20/s4) is not a certified drive mfi0: 4120 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) mfi0: 4121 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=1221000005000000,0000000000000000 mfi0: 4122 (boot + 11s/0x0002/WARN) - PD 05(e0x20/s5) is not a certified drive mfi0: 4123 (301144477s/0x0020/info) - Time established as 07/17/09 11:14:37; (21 seconds since power on) mfi0: 4124 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0060/1000/1f0c/1028) mfi0: 4125 (boot + 3s/0x0020/info) - Firmware version 1.21.02-0528 mfi0: 4126 (boot + 3s/0x0008/info) - Battery Present mfi0: 4127 (boot + 3s/0x0020/info) - Controller hardware revision ID (0x0) mfi0: 4128 (boot + 3s/0x0020/info) - Package version 6.1.1-0047 mfi0: 4129 (boot + 3s/0x0020/info) - Board Revision mfi0: 4130 (boot + 10s/0x0004/info) - Enclosure PD 20(c None/p0) communication restored mfi0: 4131 (boot + 11s/0x0002/info) - Inserted: Encl PD 20 mfi0: 4132 (boot + 11s/0x0002/info) - Inserted: PD 20(c None/p0) Info: enclPd=20, scsiType=d, portMap=09, sasAddr=50024080682ba500,0000000000000000 mfi0: 4133 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) mfi0: 4134 (boot + 11s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=1221000000000000,0000000000000000 mfi0: 4135 (boot + 11s/0x0002/WARN) - PD 00(e0x20/s0) is not a certified drive mfi0: 4136 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) mfi0: 4137 (boot + 11s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=1221000001000000,0000000000000000 mfi0: 4138 (boot + 11s/0x0002/WARN) - PD 01(e0x20/s1) is not a certified drive mfi0: 4139 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) mfi0: 4140 (boot + 11s/0x0002/info) - Inserted: PD 02(e0x20/s2) Info: enclPd=20, scsiType=0, portMap=02, sasAddr=1221000002000000,0000000000000000 mfi0: 4141 (boot + 11s/0x0002/WARN) - PD 02(e0x20/s2) is not a certified drive mfi0: 4142 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) mfi0: 4143 (boot + 11s/0x0002/info) - Inserted: PD 03(e0x20/s3) Info: enclPd=20, scsiType=0, portMap=03, sasAddr=1221000003000000,0000000000000000 mfi0: 4144 (boot + 11s/0x0002/WARN) - PD 03(e0x20/s3) is not a certified drive mfi0: 4145 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) mfi0: 4146 (boot + 11s/0x0002/info) - Inserted: PD 04(e0x20/s4) Info: enclPd=20, scsiType=0, portMap=04, sasAddr=1221000004000000,0000000000000000 mfi0: 4147 (boot + 11s/0x0002/WARN) - PD 04(e0x20/s4) is not a certified drive mfi0: 4148 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) mfi0: 4149 (boot + 11s/0x0002/info) - Inserted: PD 05(e0x20/s5) Info: enclPd=20, scsiType=0, portMap=05, sasAddr=1221000005000000,0000000000000000 mfi0: 4150 (boot + 11s/0x0002/WARN) - PD 05(e0x20/s5) is not a certified drive mfi0: 4151 (301144554s/0x0020/info) - Time established as 07/17/09 11:15:54; (51 seconds since power on) mfi0: 4152 (301144571s/0x0008/info) - Battery temperature is normal mfi0: 4153 (301144571s/0x0008/info) - Battery started charging mfi0: [ITHREAD] pcib7: at device 4.0 on pci0 pci10: on pcib7 pcib8: at device 5.0 on pci0 pci11: on pcib8 pcib9: at device 6.0 on pci0 pci12: on pcib9 pcib10: at device 7.0 on pci0 pci13: on pcib10 pcib11: at device 28.0 on pci0 pci2: on pcib11 pcib12: at device 0.0 on pci2 pci3: on pcib12 bce0: mem 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci3 miibus0: on bce0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bce0: Ethernet address: 00:24:e8:6a:b0:0e bce0: [ITHREAD] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (0x04060005); Flags( MFW MSI ) uhci0: port 0xcce0-0xccff irq 21 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xccc0-0xccdf irq 20 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xcca0-0xccbf irq 21 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xcc80-0xcc9f irq 20 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: on uhci3 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xfc700400-0xfc7007ff irq 21 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: on usb4 uhub4: 8 ports with 8 removable, self powered uhub5: on uhub4 uhub5: multiple transaction translators uhub5: 4 ports with 4 removable, self powered pcib13: at device 30.0 on pci0 pci14: on pcib13 vgapci0: port 0xdc00-0xdcff mem 0xd8000000-0xdfffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on pci14 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xcc78-0xcc7f,0xcc70-0xcc73,0xcc60-0xcc67,0xcc58-0xcc5b,0xcc40-0xcc4f mem 0xfc700000-0xfc7003ff irq 23 at device 31.2 on pci0 atapci0: [ITHREAD] ata2: on atapci0 ata2: [ITHREAD] ata3: on atapci0 ata3: [ITHREAD] fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] cpu0: on acpi0 est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 471a471a0600471a device_attach: est0 attach returned 6 p4tcc0: on cpu0 cpu1: on acpi0 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 471a471a0600471a device_attach: est1 attach returned 6 p4tcc1: on cpu1 cpu2: on acpi0 est2: on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 471a471a0600471a device_attach: est2 attach returned 6 p4tcc2: on cpu2 cpu3: on acpi0 est3: on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 471a471a0600471a device_attach: est3 attach returned 6 p4tcc3: on cpu3 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: does not respond device_attach: fdc0 attach returned 6 orm0: at iomem 0xc0000-0xc8fff,0xec000-0xeffff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ukbd0: on uhub1 kbd2 at ukbd0 ums0: on uhub1 ums0: 5 buttons and Z dir. WARNING: ZFS is considered to be an experimental feature in FreeBSD. Timecounters tick every 1.000 msec ZFS filesystem version 6 ZFS storage pool version 6 acd0: DVDR at ata3-master SATA150 mfi0: 4154 (301144571s/0x0008/info) - Current capacity of the battery is above threshold mfid0: on mfi0 mfid0: 953344MB (1952448512 sectors) RAID volume '' is optimal mfid1: on mfi0 mfid1: 953344MB (1952448512 sectors) RAID volume '' is optimal mfid2: on mfi0 mfid2: 953344MB (1952448512 sectors) RAID volume '' is optimal mfid3: on mfi0 mfid3: 953344MB (1952448512 sectors) RAID volume '' is optimal mfid4: on mfi0 mfid4: 953344MB (1952448512 sectors) RAID volume '' is optimal mfid5: on mfi0 mfid5: 953344MB (1952448512 sectors) RAID volume '' is optimal SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! GEOM_LABEL: Label for provider mfid0s1a is ufsid/4a56b979738c9009. GEOM_LABEL: Label for provider mfid1s1a is ufsid/4a56bd8c81f119f5. Trying to mount root from zfs:tank/root GEOM_LABEL: Label ufsid/4a56b979738c9009 removed. GEOM_LABEL: Label ufsid/4a56bd8c81f119f5 removed. 'pciconf -l' output: hostb0@pci0:0:0:0: class=0x060000 card=0x80868086 chip=0x25c08086 rev=0x12 hdr=0x00 pcib1@pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x25e28086 rev=0x12 hdr=0x01 pcib6@pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x25e38086 rev=0x12 hdr=0x01 pcib7@pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x25f88086 rev=0x12 hdr=0x01 pcib8@pci0:0:5:0: class=0x060400 card=0x00000000 chip=0x25e58086 rev=0x12 hdr=0x01 pcib9@pci0:0:6:0: class=0x060400 card=0x00000000 chip=0x25f98086 rev=0x12 hdr=0x01 pcib10@pci0:0:7:0: class=0x060400 card=0x00000000 chip=0x25e78086 rev=0x12 hdr=0x01 hostb1@pci0:0:16:0: class=0x060000 card=0x01b21028 chip=0x25f08086 rev=0x12 hdr=0x00 hostb2@pci0:0:16:1: class=0x060000 card=0x01b21028 chip=0x25f08086 rev=0x12 hdr=0x00 hostb3@pci0:0:16:2: class=0x060000 card=0x01b21028 chip=0x25f08086 rev=0x12 hdr=0x00 hostb4@pci0:0:17:0: class=0x060000 card=0x80868086 chip=0x25f18086 rev=0x12 hdr=0x00 hostb5@pci0:0:19:0: class=0x060000 card=0x80868086 chip=0x25f38086 rev=0x12 hdr=0x00 hostb6@pci0:0:21:0: class=0x060000 card=0x80868086 chip=0x25f58086 rev=0x12 hdr=0x00 hostb7@pci0:0:22:0: class=0x060000 card=0x80868086 chip=0x25f68086 rev=0x12 hdr=0x00 pcib11@pci0:0:28:0: class=0x060400 card=0x01b21028 chip=0x26908086 rev=0x09 hdr=0x01 uhci0@pci0:0:29:0: class=0x0c0300 card=0x01b21028 chip=0x26888086 rev=0x09 hdr=0x00 uhci1@pci0:0:29:1: class=0x0c0300 card=0x01b21028 chip=0x26898086 rev=0x09 hdr=0x00 uhci2@pci0:0:29:2: class=0x0c0300 card=0x01b21028 chip=0x268a8086 rev=0x09 hdr=0x00 uhci3@pci0:0:29:3: class=0x0c0300 card=0x01b21028 chip=0x268b8086 rev=0x09 hdr=0x00 ehci0@pci0:0:29:7: class=0x0c0320 card=0x01b21028 chip=0x268c8086 rev=0x09 hdr=0x00 pcib13@pci0:0:30:0: class=0x060401 card=0x00000000 chip=0x244e8086 rev=0xd9 hdr=0x01 isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x26708086 rev=0x09 hdr=0x00 atapci0@pci0:0:31:2: class=0x01018f card=0x01b21028 chip=0x26808086 rev=0x09 hdr=0x00 pcib2@pci0:4:0:0: class=0x060400 card=0x00000000 chip=0x35008086 rev=0x01 hdr=0x01 pcib5@pci0:4:0:3: class=0x060400 card=0x00000000 chip=0x350c8086 rev=0x01 hdr=0x01 pcib3@pci0:5:0:0: class=0x060400 card=0x00000000 chip=0x35108086 rev=0x01 hdr=0x01 pcib4@pci0:5:1:0: class=0x060400 card=0x00000000 chip=0x35148086 rev=0x01 hdr=0x01 mfi0@pci0:1:0:0: class=0x010400 card=0x1f0c1028 chip=0x00601000 rev=0x04 hdr=0x00 pcib12@pci0:2:0:0: class=0x060400 card=0x00000000 chip=0x01031166 rev=0xc3 hdr=0x01 bce0@pci0:3:0:0: class=0x020000 card=0x01b21028 chip=0x164c14e4 rev=0x12 hdr=0x00 vgapci0@pci0:14:13:0: class=0x030000 card=0x01b21028 chip=0x515e1002 rev=0x02 hdr=0x00 'pciconf -lv' output *snipped*: uhci0@pci0:0:29:0: class=0x0c0300 card=0x01b21028 chip=0x26888086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller' class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0x01b21028 chip=0x26898086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller' class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0x01b21028 chip=0x268a8086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller' class = serial bus subclass = USB uhci3@pci0:0:29:3: class=0x0c0300 card=0x01b21028 chip=0x268b8086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = '631xESB/632xESB/3100 Chipset USB Universal Host Controller' class = serial bus subclass = USB ehci0@pci0:0:29:7: class=0x0c0320 card=0x01b21028 chip=0x268c8086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = '631xESB/632xESB/3100 Chipset USB2 Enhanced Host Controller' class = serial bus subclass = USB 'usbdevs -v' output: Controller /dev/usb0: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 addr 2: low speed, power 100 mA, config 1, B015-000 R0.74 USB to PS2 adapter.(0x0002), Tripplite(0x09ae), rev 1.00 Controller /dev/usb2: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb3: addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered Controller /dev/usb4: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00 port 1 powered port 2 powered port 3 enabled port 4 powered port 5 addr 2: high speed, self powered, config 1, product 0x6560(0x6560), vendor 0x04b4(0x04b4), rev 0.0b port 1 powered port 2 powered port 3 powered port 4 powered port 6 powered port 7 powered port 8 powered