From owner-freebsd-hardware@FreeBSD.ORG Tue Aug 12 16:13:18 2008 Return-Path: Delivered-To: freebsd-hardware@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 26F511065674 for ; Tue, 12 Aug 2008 16:13:18 +0000 (UTC) (envelope-from andrew.hotlab@hotmail.com) Received: from bay0-omc3-s36.bay0.hotmail.com (bay0-omc3-s36.bay0.hotmail.com [65.54.246.236]) by mx1.freebsd.org (Postfix) with ESMTP id 1EFC98FC13 for ; Tue, 12 Aug 2008 16:13:18 +0000 (UTC) (envelope-from andrew.hotlab@hotmail.com) Received: from BAY102-W29 ([64.4.61.129]) by bay0-omc3-s36.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959); Tue, 12 Aug 2008 09:13:17 -0700 Message-ID: X-Originating-IP: [217.133.1.92] From: Andrew Hotlab To: Mike Tancsa Date: Tue, 12 Aug 2008 16:13:17 +0000 Importance: Normal In-Reply-To: <200808121549.m7CFnmBo031979@lava.sentex.ca> References: <200808121549.m7CFnmBo031979@lava.sentex.ca> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 X-OriginalArrivalTime: 12 Aug 2008 16:13:17.0827 (UTC) FILETIME=[54CFFD30:01C8FC96] Cc: freebsd-hardware@freebsd.org Subject: RE: Areca ARC-1120 on FreeBSD 7.0 X-BeenThere: freebsd-hardware@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: General discussion of FreeBSD hardware List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 12 Aug 2008 16:13:18 -0000 > At 11:11 AM 8/12/2008=2C Andrew Hotlab wrote: >=20 >>You can confirm me that you are successfully using FreeBSD 7.0R with=20 >>the 1.43 firmware? If it's so=2C we might compare our hardware=20 >>components to find out if and what are differences... >=20 >=20 > Hi=2C > The dmesg below is on a supermicro board. Actually=2C if you=20 > take the Areca out=2C does 7.0R boot up ? As mentioned by another=20 > poster=2C try the RELENG_7 snapshot to see if it boots with that. If=20 > you are starting fresh=2C I would suggest it as there are a number of=20 > bug fixes and enhancements in the snapshot and its quite stable. >=20 >=20 Hi Mike... you've read in my mind: I tried to boot up 7.0R without the card= immediately after I sent my last e-mail! :) I can confirm that all works like a charm without the Arec= a card. So=2C where the problem might lie?! I tested the card with both 7.= 0-STABLE and 8.0-CURRENT (it hangs even before) without success... :( P.S.: during all these tests I was always verifying that the card itself wa= s always functioning well=2C by booting the Windows Server 2003 x64 installed on the RAID set. >=20 >=20 >>Thanks a lot for your help. >> >>---------------------------------------- >>> From: mike@sentex.net >>> To: andrew.hotlab@hotmail.com >>> Subject: Re: Areca ARC-1120 on FreeBSD 7.0 >>> Date: Tue=2C 12 Aug 2008 08:13:56 -0400 >>> >>> On Mon=2C 11 Aug 2008 22:54:41 +0000=2C in sentex.lists.freebsd.hardwar= e >>> you wrote: >>>>arcmsr0: mem 0xfc7ff000-0xfc7fffff=2C0xfc000000-0xfc3fffff irq 31=20 >> at device 14.0 on pci2 >>>>arcmsr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfc7ff000 >>>>ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07 >>>>ARECA RAID ADAPTER0: FIRMWARE VERSION V1.39 2006-2-9 >>> >>> >>> Not sure it will help you or not=2C but I run the same card with versio= n >>> 1.43 of the firmware. I would try to upgrade the Areca card's >>> firmware and then give 7.0R another try. >>> >>> ---Mike >> _________________________________________________________________ News=2C entertainment and everything you care about at Live.com. Get it now= ! http://www.live.com/getstarted.aspx=