Date: Thu, 4 Sep 2008 19:50:08 +0200 From: Roland Smith <rsmith@xs4all.nl> To: Dan Nguyen <tugia@netscape.com> Cc: freebsd-x11@freebsd.org Subject: Re: x on freebsd 7 Message-ID: <20080904175008.GA25470@slackbox.xs4all.nl> In-Reply-To: <48C00699.9080500@netscape.com> References: <48BF5732.9060203@netscape.com> <20080904054010.GA6511@slackbox.xs4all.nl> <48C00699.9080500@netscape.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On Thu, Sep 04, 2008 at 09:02:33AM -0700, Dan Nguyen wrote: > the version the xorg that I am using is 7.3.1, Please update to the latest version in ports (see below). <snip> > Section "Monitor" > #DisplaySize 370 280 # mm > Identifier "Monitor0" > VendorName "SPT" > ModelName "KOMODO K98A" > ### Comment all HorizSync and VertRefresh values to use DDC: Do what this says and try commenting out the two lines below. > HorizSync 31.0 - 95.0 > VertRefresh 50.0 - 120.0 > Option "DPMS" > EndSection <snip> > Section "Device" <snip> > Identifier "Card0" > Driver "ati" > VendorName "ATI Technologies Inc" > BoardName "Rage 128 RF/SG AGP" > BusID "PCI:1:0:0" > EndSection <snip> > here the info for > > var/log/Xorg.0.log: > > > X.Org X Server 1.4.0 The latest X server in ports is 1.4.2. <snip> > (II) LoadModule: "ati" > (II) Loading /usr/local/lib/xorg/modules/drivers//ati_drv.so > (II) Module ati: vendor="X.Org Foundation" > compiled for 1.4.0, module version = 6.7.195 The latest ATI driver in ports is 6.9.0 > (II) R128(0): initializing int10 > (==) R128(0): Write-combining range (0xa0000,0x20000) was already clear > (==) R128(0): Write-combining range (0xc0000,0x40000) was already clear > (II) R128(0): Primary V_BIOS segment is: 0xc000 > (==) R128(0): Write-combining range (0x0,0x1000) was already clear > (II) R128(0): VESA BIOS detected > (II) R128(0): VESA VBE Version 2.0 > (II) R128(0): VESA VBE Total Mem: 32768 kB > (II) R128(0): VESA VBE OEM: ATI RAGE128 > (II) R128(0): VESA VBE OEM Software Rev: 1.0 > (II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc. > (II) R128(0): VESA VBE OEM Product: R128 > (II) R128(0): VESA VBE OEM Product Rev: 01.00 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc"(II) Module "ddc" already built-in > (II) R128(0): VESA VBE DDC supported > (II) R128(0): VESA VBE DDC Level 2 > (II) R128(0): VESA VBE DDC transfer in appr. 2 sec. > (II) R128(0): VESA VBE DDC read successfully > (WW) EDID preferred timing clock 157.50MHz exceeds claimed max 90MHz, fixing Looks like the card cannot drive the monitor as fast as it wants. Roland -- R.F.Smith http://www.xs4all.nl/~rsmith/ [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725) [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (FreeBSD) iEYEARECAAYFAkjAH9AACgkQEnfvsMMhpyW4VACfUsaiTFQ0iW/0/QeN+Isa/BmM huQAoKmAhVjswtQtAAMOJvUgkc6BPMjT =EDpx -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080904175008.GA25470>