Date: Wed, 19 Oct 2016 13:53:28 +0000 From: Yoshiro MIHIRA <sanpei.ml@gmail.com> To: Tom Sparks <tom@ycombinator.com>, freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: Hummingboard boot hangs in -HEAD Message-ID: <CALwmBx0z9Xb0iYWPi9aWn5Nn=Pf2%2BDqA3LwFojqUPquz%2BqpF1g@mail.gmail.com> In-Reply-To: <CALwmBx1gdBAfNN2CxvN4rvQd_Vtywg2Ct%2Bb6aGMRV29hBvFCPQ@mail.gmail.com> References: <CABLy0qSyfe-j%2Bwh6OGa2Dv5EfX_SQF2xkTeX_zOV2PmawL_dyw@mail.gmail.com> <CABLy0qQ=UPGRuMnZPDXwXH2YhjdTwttgkYZ=v3_XB0gSRVi2NQ@mail.gmail.com> <CALwmBx1gdBAfNN2CxvN4rvQd_Vtywg2Ct%2Bb6aGMRV29hBvFCPQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Finally I can boot 12-current image with Hummingboard. I replace /boot/dtb files to 10.3-RELEASE or SolidRun's Linux dtb files. I can boot normally Hummingboard. I put dtb files which was out from 10.3-RELEASE image. http://www.sanpei.org/~sanpei/tmp/hummingboard-boot-dtb-10.3-RELEASE.tar.gz I will check differences between 10.3-RELEASE or SolidRun's Linux image and latest currentdts files. Yoshiro MIHIRA <sanpei.ml@gmail.com>: > Does someone solve this issue? > I > downloaded FreeBSD-11.0-CURRENT-arm-armv6-CUBOX-HUMMINGBOARD-20160308-r29= 6485 > image. But I > found stil this is there. > > I tested above image and latest kernel(r296921M) on hummingboard-i2 > > 2016=E5=B9=B42=E6=9C=8820=E6=97=A5(=E5=9C=9F) 9:18 Tom Sparks <tom@ycombi= nator.com>: > > So rebuilding the kernel in between revs seems to work, so I'm guessing i= ts > toolchain related. I'll do a buildworld to confirm. > > On Thu, Feb 18, 2016 at 11:40 AM, Tom Sparks <tom@ycombinator.com> wrote: > > > I'd initially thought that it was my build that had failed so I snagged > an > > image from ftp.freebsd.org and no, that image fails to boot to multiuse= r > > as well. > > > > > > Here's where it hangs: > > --- snip --- > > usbus0: 480Mbps High Speed USB v2.0 > > usbus1: 480Mbps High Speed USB v2.0 > > ugen1.1: <Freescale> at usbus1 > > uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on > > usbus1 > > ugen0.1: <Freescale> at usbus0 > > uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on > > usbus0 > > hdmi0: i2c transfer failed: 2 > > fb0: failed to get EDID info from HDMI framer > > fbd0 on fb0 > > VT: initialize with new VT driver "fb". > > uhub0: 1 port with 1 removable, self powered > > --- snip --- > > > > with boot -v I get a bit further: > > --- snip --- > > VT: initialize with new VT driver "fb". > > random: harvesting attach, 8 bytes (4 bits) from fbd0 > > uhub0: 1 port with 1 removable, self powered > > random: harvesting attach, 8 bytes (4 bits) from uhub0 > > --- snip --- > > > > Then a while later, some other stuff appears: > > > > --- snip --- > > uhub0: 1 port with 1 removable, self powered > > random: harvesting attach, 8 bytes (4 bits) from uhub0 > > sdhci_imx0-slot0: Divider 250 for freq 400000 (base 200000000) > > mmc0: Probing bus > > uhub1: 1 port with 1 removable, self powered > > random: harvesting attach, 8 bytes (4 bits) from uhub1 > > --- snip --- > > > > Supposition is that this broke in the range of r295351 through r29554. > > > > Anyone? > > > > -- > > Tom Sparks > > Systems Engineer > > > > > > -- > Tom Sparks > Systems Engineer > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CALwmBx0z9Xb0iYWPi9aWn5Nn=Pf2%2BDqA3LwFojqUPquz%2BqpF1g>