From owner-freebsd-hardware  Sat Jan 25 02:55:49 1997
Return-Path: <owner-hardware>
Received: (from root@localhost)
          by freefall.freebsd.org (8.8.5/8.8.5) id CAA28461
          for hardware-outgoing; Sat, 25 Jan 1997 02:55:49 -0800 (PST)
Received: from dfw-ix5.ix.netcom.com (dfw-ix5.ix.netcom.com [206.214.98.5])
          by freefall.freebsd.org (8.8.5/8.8.5) with SMTP id CAA28443;
          Sat, 25 Jan 1997 02:55:45 -0800 (PST)
Received: from baloon.mimi.com (ncr-us9-06.ix.netcom.com [204.31.236.198]) by dfw-ix5.ix.netcom.com (8.6.13/8.6.12) with ESMTP id CAA15382; Sat, 25 Jan 1997 02:55:11 -0800
Received: (from asami@localhost) by baloon.mimi.com (8.8.4/8.6.12) id CAA29748; Sat, 25 Jan 1997 02:55:09 -0800 (PST)
Date: Sat, 25 Jan 1997 02:55:09 -0800 (PST)
Message-Id: <199701251055.CAA29748@baloon.mimi.com>
To: joe@via.net
CC: hardware@freebsd.org, scsi@freebsd.org
In-reply-to: <199701250816.AAA15585@monk.via.net> (message from Joe McGuckin on Sat, 25 Jan 1997 00:16:27 -0800)
Subject: Re: Symbios (NCR) '875 SCSI card question...
From: asami@vader.cs.berkeley.edu (Satoshi Asami)
Sender: owner-hardware@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk

 * From: Joe McGuckin <joe@via.net>

Moved to "scsi"....

 * With both sets of drives connected, the board cannot probe out any
 * drives. If I disconnect either the internal WIDE drive or the external 
 * narrow drives, the card will probe out the remaining drives that are 
 * connected.

Have you turned off termination on the card?  Or maybe the external
wide to narrow cable is not handling some wires right, try terminating
only the high bits on the card.

Satoshi