Date: Thu, 11 Jun 1998 08:51:09 -0400 From: MALCOLM BOFF <Malcolm_Boff@compuserve.com> To: freebsd-questions <freebsd-questions@FreeBSD.ORG> Subject: Upgrade from 2.2.2-RELEASE to 2.2.6-RELEASE Message-ID: <199806110851_MC2-3FE3-198D@compuserve.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Due to a problem that I was experiencing I felt obliged to do an UPGRADE
install from 2.2.2-RELEASE to 2.2.6-RELEASE and I have a couple of
problems.
1) The 'dmesg' output from the GENERIC kernel is below and you will notice
that it reports a Pentium F00F error - I was not aware that this was
possible
on a 233Mhz Pentium and it did not report this at 2.2.2 whats happening
here.
2) Issuing a 'startx' command with my existing /etc/X86Config now gives me
an error 'failed to set default font path '.....' followed by 'could not
open default
font 'fixed''. "The Complete FreeBSD" says that for the second of these
errors you should run 'mkfontdir' on all the font directories, however the
first
message implies that it cannot find the font path so the second error is
probably a follow on from the first. Why can't it set the default font path
? All
the paths are present !
'dmesg output from GENERIC kernel attached'
Malcolm G. Boff
Sylmex Ltd.
[-- Attachment #2 --]
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.6-RELEASE #0: Wed Mar 25 02:28:49 GMT 1998
jkh@time.cdrom.com:/usr/src/sys/compile/GENERIC
CPU: Pentium (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 33554432 (32768K bytes)
avail memory = 30445568 (29732K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82439TX PCI cache memory controller> rev 1 on pci0:0:0
chip1 <Intel 82371AB PCI-ISA bridge> rev 1 on pci0:7:0
chip2 <Intel 82371AB IDE interface> rev 1 on pci0:7:1
chip3 <Intel 82371AB USB interface> rev 1 int d irq 11 on pci0:7:2
chip4 <Intel 82371AB Power management controller> rev 1 on pci0:7:3
ahc0 <Adaptec 2940 SCSI host adapter> rev 0 int a irq 10 on pci0:9:0
ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "QUANTUM FIREBALL ST4.3S 0F0C" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 4136MB (8471232 512 byte sectors)
(ahc0:1:0): "IBM DPES-31080 S31Q" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 1034MB (2118144 512 byte sectors)
(ahc0:2:0): "HP HP35480A 1109" type 1 removable SCSI 2
st0(ahc0:2:0): Sequential-Access density code 0x13, drive empty
(ahc0:3:0): "PIONEER CD-ROM DR-104X 0022" type 5 removable SCSI 2
cd0(ahc0:3:0): CD-ROM cd present [323780 x 2048 byte records]
ahc0:A:5: refuses synchronous negotiation. Using asynchronous transfers
(ahc0:5:0): "IOMEGA ZIP 100 D.09" type 0 removable SCSI 2
sd2(ahc0:5:0): Direct-Access
sd2(ahc0:5:0): NOT READY asc:3a,0 Medium not present
sd2: could not get size
sd2(ahc0:5:0): ILLEGAL REQUEST asc:24,0 Invalid field in CDB
sd2 could not mode sense (4). Using ficticious geometry
0MB (0 512 byte sectors)
vga0 <VGA-compatible display device> rev 0 int a irq 11 on pci0:11:0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: WARNING: video mode switching is only partially supported
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 at 0x378-0x37f on isa
lpt1 not probed due to I/O address conflict with lpt0 at 0x378
mse0 not found at 0x23c
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 not found at 0x170
bt0 not found at 0x330
uha0 not found at 0x330
aha0 not found at 0x330
aic0 not found at 0x340
nca0 not found at 0x1f88
nca1 not found at 0x350
sea0 not found
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found at 0xffffffff
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
changing root device to st1s1a
Intel Pentium F00F detected, installing workaround
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199806110851_MC2-3FE3-198D>