Date: Wed, 2 Apr 2003 08:51:01 -0800 (PST) From: "W. J. Williams" <willardjwilliams@yahoo.com> To: "W. J. Williams" <will@willardjwilliams.com>, freebsd-questions@freebsd.org Subject: Re: Gigabit ethernet SMC Tigercard 1000 Message-ID: <20030402165101.83940.qmail@web13508.mail.yahoo.com> In-Reply-To: <20030402161455.39703.qmail@web13503.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
God, I need to learn to read before I send...my kernel is recompiling right now with the lge device (already had the miibus device)...will see how this works then...two minutes later...yes it works now...still sending hoping it might benefit someone else... Will --- "W. J. Williams" <will@willardjwilliams.com> wrote: > ok, that was dumb, the inphy0 doesnt relate to the gig-e card...do I > need > to activate something in the kernel to support? > > > Does anyone know how to configure this. > > > > I have installed the card and connected to my switch. have noticed I > > now > > have interfaces > > > > inphy0: <i82555 10/100 media interface> on miibus0 > > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > > inphy1: <i82555 10/100 media interface> on miibus1 > > inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > > not sure why listed twice...or if this even relates to the card seeing > > how > > it doesnt say 1000base-SX > > > > here is what the entire interface section looks like (from DMESG): > > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x5400-0x543f mem > > 0xfb000000-0xfb0fffff,0xfb201000-0xfb201fff irq 10 at device 3.0 on > pci0 > > fxp0: Ethernet address 00:d0:b7:b7:66:eb > > inphy0: <i82555 10/100 media interface> on miibus0 > > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x5440-0x547f mem > > 0xfb100000-0xfb1fffff,0xfb202000-0xfb202fff irq 5 at device 6.0 on > pci0 > > fxp1: Ethernet address 00:02:b3:10:e4:13 > > inphy1: <i82555 10/100 media interface> on miibus1 > > inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > > > > > Here is the output of ifconfig: > > > > fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet 192.168.0.2 netmask 0xfffff800 broadcast 192.168.7.255 > > inet6 fe80::2d0:b7ff:feb7:66eb%fxp0 prefixlen 64 scopeid 0x1 > > ether 00:d0:b7:b7:66:eb > > media: Ethernet autoselect (100baseTX <full-duplex>) > > status: active > > fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 > > inet6 fe80::202:b3ff:fe10:e413%fxp1 prefixlen 64 scopeid 0x2 > > ether 00:02:b3:10:e4:13 > > media: Ethernet autoselect (100baseTX <full-duplex>) > > status: active > > ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 > > sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 > > faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500 > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet6 ::1 prefixlen 128 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > > inet 127.0.0.1 netmask 0xff000000 > > > > I am running two 100baseT nics on this box... > > > > appreciate any help. > > > > Will > > > > > > > > > > ===== > > Will Williams > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > > > ===== > Will Williams ===== Will Williams
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030402165101.83940.qmail>