From owner-freebsd-hackers Sun Dec 25 17:57:20 1994 Return-Path: hackers-owner Received: (from root@localhost) by freefall.cdrom.com (8.6.9/8.6.6) id RAA21004 for hackers-outgoing; Sun, 25 Dec 1994 17:57:20 -0800 Received: from pyromania.apana.org.au (pyromania.apana.org.au [202.12.87.123]) by freefall.cdrom.com (8.6.9/8.6.6) with ESMTP id BAA20998 for ; Mon, 26 Dec 1994 01:57:10 GMT Received: (from john@localhost) by pyromania.apana.org.au (8.6.9/8.6.9) id MAA00145 for hackers@freebsd.org; Mon, 26 Dec 1994 12:55:50 +1100 From: John Herks Message-Id: <199412260155.MAA00145@pyromania.apana.org.au> Subject: PCI NCR Controller Config. To: hackers@freebsd.org Date: Mon, 26 Dec 1994 12:55:50 +1100 (EST) X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 1799 Sender: hackers-owner@freebsd.org Precedence: bulk What is the correct way to set a PCI Interuppt in the BIOS and the Motherboard jumpers for a GIGA NCR SCSI Card ? The Card has a primary/secondary jumper for selecting IRQ. The manual says that the jumper in the primary position is IRQ 9 and in the secondary position can by any other IRQ ? How does all this work ? Am I really losing that much HD I/O performance with my current settings ? -------------------------------------------------------------------------- pci0: scanning device 0..15, mechanism=2. chip0 on pci0:0 ncr0 int a (config) not bound on pci0:1 reg20: virtual=0xf5082000 physical=0xc0000000 pci_map_int failed: no int line set. interruptless mode: reduced performance. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ncr0: restart (scsi reset). ncr0 scanning for targets 0..6 (1.12) ncr0 waiting for scsi devices to settle ncr0 targ 0 lun 0: type 0(direct) fixed SCSI2 ncr0 targ 0 lun 0: sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. sd0: 1029MB (2109376 total sec), 2874 cyl, 8 head, 91 sec, bytes/sec 512 chip1 on pci0:2 pci uses physical addresses from 0xc0000000 to 0xc0001000 -- \|/ (@ @) ----------------------------oOO--(_)--OOo----------------------------------- ``` ''' John Herks Communications Engineer Pyromania Unix Melbourne john@pyromania.apana.org.au Phone:+613-220-4757 ----------------------------------------------------------------------------