Date: Wed, 09 Apr 2003 00:15:45 +0200 From: Marcel Dijk <nascar24@home.nl> To: questions@freebsd.org, net@freebsd.org Subject: ISDN (Europe. dial-up) POSTED to QUESTIONS and NET. Message-ID: <3E934A11.3050305@home.nl>
next in thread | raw e-mail | index | archive | help
Hello all,
I am trying to get ISDN4BSD to work, thusfar, no luck. I live in Europe.
I use my ISDN adapter (Teles 16.3 ISA non-PnP) to dial in to my ISP.
But if I start ppp and dial I get all kind of error from isdnd wich I
cannot understand.
This is my isdnd.rc:
# SYSTEM section: isdnd global configuration parameters
system
# accounting
acctall = on # generate info for everything
acctfile = /var/log/isdnd.acct # name & location of accounting file
useacctfile = yes # generate accouting info to file
isdntime = on
monitor-allowed = no # global switch: monitor on/off
# User-ppp example
entry
name = userppp0
usrdevicename = rbch
usrdeviceunit = 0
isdncontroller = 0
isdnchannel = 1
local-phone-incoming = 0505267744
remote-phone-incoming = *
local-phone-dialout = 0505267744 # This *MUST* be your local number
remote-phone-dialout = 1234567 # ppp(8) will override this
remdial-handling = first
dialin-reaction = ignore
dialout-type = normal
b1protocol = hdlc
idletime-incoming = 900 # Should be larger than ppp's timeout
idletime-outgoing = 900 # Should be larger than ppp's timeout
unitlength = 0
unitlengthsrc = conf
dialretries = 1
dialrandincr = on
recoverytime = 1 # Should be smaller than ppp's redial
usedown = off
downtries = 2
downtime = 30
entry
name = userppp1
usrdevicename = rbch
usrdeviceunit = 1
isdncontroller = 0
isdnchannel = 2
local-phone-incoming = 1234567
remote-phone-incoming = *
local-phone-dialout = 0505267744 # This *MUST* be your local number
remote-phone-dialout = 1234567 # ppp(8) will override this
remdial-handling = first
dialin-reaction = accept
dialout-type = normal
b1protocol = hdlc
idletime-incoming = 900 # Should be larger than ppp's timeout
idletime-outgoing = 900 # Should be larger than ppp's timeout
unitlength = 0
unitlengthsrc = conf
dialretries = 1
dialrandincr = on
recoverytime = 1 # Should be smaller than ppp's redial
usedown = off
downtries = 2
downtime = 30
----
I filled it in according to the example in /usr/share/examples/isdn.
And here is my ppp.conf
default:
set phone ISP_NUMBER # Replace this with your ISPs phone number
set authname MY_USERNAME # Replace these with your login name & password.
set authkey MY_PASS # This profile assumes you're using PAP or CHAP.
# set enddisc mac # Assuming you have a LAN (dont have a LAN on the
ISDN PC)
enable lqr
set reconnect 3 5
set redial 3 10
set lqrperiod 45
disable pred1 deflate mppe
deny pred1 deflate mppe
set timeout 60 300 # The minimum charge period is 5 minutes, so don't
# hangup before then
# We have no chat scripts in the ISDN world (yet)
set dial
set login
set logout
set hangup
set device /dev/i4brbch0 /dev/i4brbch1 # Raw B-channel devices
set speed sync # ISDN is synchronous
enable dns # Ask the peer what to put in resolv.conf
# Take a wild guess at an IP number and let the other side decide
set ifaddr 172.16.0.1/0 212.0.0.0/0 0 0
add! default hisaddr
# set mrru 1500 # Multilink mode please
set mru 1504 # Room for the MP header
# clone 1,2 # Two new links
# link deflink rm # And get rid of the original one
# link * set mode auto # Automatically manage the second link
# set autoload 10 80 30 # Down @10% usage, up at 80%, 30s sample
set server /var/run/ppp/ppp-isdn "" 0177 # The diagnostic port (-rw-------)
---
Also filled in according to the example.
I also have an alternative ppp.conf wich gives the same errors:
default:
set device /dev/i4brbch0 /dev/i4brbch1
set speed sync
set dial
set logout
set hangup
hetnet:
set phone ISP_NUMBER # Replace this with your ISPs phone number
set login
set authname THE_NAME # Replace these with your login name & password.
set authkey THE_PASS # This profile assumes you're using PAP or CHAP.
ifaddr 0.0.0.0
add default HISADDR
enable dns
# set enddisc mac # Assuming you have a LAN
# enable lqr
# set reconnect 3 5
# set redial 3 10
# set lqrperiod 45
# disable pred1 deflate mppe
# deny pred1 deflate mppe
# set timeout 60 300 # The minimum charge period is 5 minutes, so don't
# hangup before then
# enable dns # Ask the peer what to put in resolv.conf
# Take a wild guess at an IP number and let the other side decide
#set ifaddr 172.16.0.1/0 212.0.0.0/0 0 0
#add! default hisaddr
# set mrru 1500 # Multilink mode please
#set mru 1504 # Room for the MP header
# clone 1,2 # Two new links
# link deflink rm # And get rid of the original one
# link * set mode auto # Automatically manage the second link
# set autoload 10 80 30 # Down @10% usage, up at 80%, 30s sample
# set server /var/run/ppp/ppp-isdn "" 0177 # The diagnostic port
(-rw-------)
----------
I can't give you the errors ISDND gives, I simply forgot them. It were
unintelligable errors to me.
The errors came from isdnd, not from ppp.
Sorry for the mega e-mail but I thought I could best be as verbose as
possible.
Hope someone can help.
Gr.
Marcel.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E934A11.3050305>