Date: Mon, 2 Sep 2002 11:16:53 +0200 (CEST) From: Philippe CASIDY <pcasidy@casidy.com> To: freebsd-mobile@freebsd.org Subject: Fwd: fatal error: no PC-CARD slots Message-ID: <20020902092201.C43AD19016@mail3.freesurf.fr>
next in thread | raw e-mail | index | archive | help
Hi!
I left my office recently and wanted to use my PC-CARD modem as I always
did.
When I launch pccardd, I have this message in my console:
fatal error: no PC-CARD slot
I checked dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #2: Sat Aug 24 17:23:10 CEST 2002
updater@littleoak.home:/usr/obj/usr/src/sys/LITTLEOAK
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory = 134127616 (130984K bytes)
avail memory = 126701568 (123732K bytes)
Preloaded elf kernel "kernel" at 0xc03d3000.
Preloaded elf module "snd_maestro3.ko" at 0xc03d309c.
Preloaded elf module "snd_pcm.ko" at 0xc03d3140.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00fbc20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0112 graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pcm0: <ESS Technology Maestro3> port 0xdc00-0xdcff mem 0xf6ffe000-0xf6ffffff irq
5 at device 3.0 on pci2
pcib3: <PCI to PCI bridge (vendor=1668 device=0100)> at device 6.0 on pci2
pci8: <PCI bus> on pcib3
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem 0xf8e00000-0xf8ef
ffff,0xf8fff000-0xf8ffffff irq 11 at device 4.0 on pci8
fxp0: Ethernet address 00:20:e0:68:d3:60
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci8: <unknown card> (vendor=0x11c1, dev=0x0448) at 8.0 irq 11
chip1: <PCI to CardBus bridge (vendor=104c device=ac42)> irq 11 at device 15.0 o
n pci2
chip2: <PCI to CardBus bridge (vendor=104c device=ac42)> irq 11 at device 15.1 o
n pci2
pci2: <unknown card> (vendor=0x104c, dev=0x8027) at 15.2 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xbfa0-0xbfaf at device 31.1 on pci
0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xbce0-0xbcff irq 11
at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcd7ff,0xcd800-0xcdfff,0xc
e000-0xce7ff,0xce800-0xcefff,0xcf000-0xcf7ff,0xcf800-0xcffff,0xd0000-0xd17ff on
isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
ad0: 9590MB <IBM-DJSA-210> [19485/16/63] at ata0-master UDMA66
acd0: CD-RW <TOSHIBA CD-RW/DVD-ROM SD-R2002> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s1a
pcic controllers have disappeared. I cant tell since when but last time
i compiled -STABLE was Sat Aug 24 17:23:10 CEST 2002
Any ideas are welcome!
I cant compile the kernel again before thursday 5th!
I have a borrowed an old 14K serial modem and searching on the web is
very long with such devices.
Thanks for any help.
Phil.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020902092201.C43AD19016>