From owner-freebsd-scsi Thu Feb 4 23:17:45 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id XAA07691 for freebsd-scsi-outgoing; Thu, 4 Feb 1999 23:17:45 -0800 (PST) (envelope-from owner-freebsd-scsi@FreeBSD.ORG) Received: from proxyb1-atm.san.rr.com (proxyb1-atm.san.rr.com [204.210.0.10]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id XAA07686 for ; Thu, 4 Feb 1999 23:17:44 -0800 (PST) (envelope-from erich@compecon.com) Received: from compecon.com (dt081n18.san.rr.com [204.210.23.24]) by proxyb1-atm.san.rr.com (8.8.7/8.8.8) with ESMTP id XAA04682; Thu, 4 Feb 1999 23:17:41 -0800 (PST) Message-ID: <36BA9B1D.122D1E66@compecon.com> Date: Thu, 04 Feb 1999 23:17:49 -0800 From: unsafe at any speed X-Mailer: Mozilla 4.5 [en] (X11; U; FreeBSD 2.2.8-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: The Hermit Hacker CC: freebsd-scsi@FreeBSD.ORG Subject: Re: CAM problem with 3.0S? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-scsi@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Be sure to turn off the termination on the Adaptec itself when you have both the 50-pin and 68-pin cables attached to it. You should also be aware that if you're using both the 2940UW's internal connectors that you can't have anything connected to its external connector. Also be sure your 68-pin drive and whichever drive is at the end of your 50-pin cable are both terminated. hope this helps, Eric The Hermit Hacker wrote: > > Further to my last, slightly more details to work from... > > Attached is from /var/log/messages, basically what gets spewed out when I > type 'tosha -iq'...and dmesg.boot > > A few extra details that I just clued into. One thing has changed > recently, I added a 4 gig, UW drive to the system. > > My controller is an Adaptec 2940 UW...with the two internal buses (one > 68pin, one 50pin?) ... I have both in use...my root drive, and the CD I'm > trying to read from, is on the 50pin..my new 4gig is on the 68pin. I can > access both the root (obviously) and the 4gig drive, just tosha fails on > the CD... > > %tosha -iq > error sending SCSI command: Input/output error > > the kernel is "fresh" as of about 30minute ago or so, figured I should > bring the 3.0S machine up to date before adding more data...makes no > difference... > > Trying to follow things through a little further, I just shut down and > removed the second bus (68pin)...now the CD works again. So, with both > bus's in operation, I can access both hard drives (1 on the 68pin bus, one > on the 50pin bus), but I can't touch the CD on the 50pin bus...if I remove > the 68pin bus/cable, the CD works again... > > Anything else that I should be trying? > > Marc G. Fournier > Systems Administrator @ hub.org > primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org > > ----------------------------------------------------------------------------- > Name: typescript > typescript Type: Plain Text (TEXT/PLAIN) > Encoding: BASE64 > > Name: dmesg.boot > dmesg.boot Type: Plain Text (TEXT/PLAIN) > Encoding: BASE64 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message