Date: Mon, 5 Jan 2004 05:33:35 +0100 From: Bernd Walter <ticso@cicely12.cicely.de> To: John Baldwin <jhb@FreeBSD.org> Cc: current@FreeBSD.org Subject: Re: Still IRQ routing problems with bridged devices. Message-ID: <20040105043334.GB17023@cicely12.cicely.de> In-Reply-To: <20040102224015.GI17023@cicely12.cicely.de> References: <20040102195244.GE17023@cicely12.cicely.de> <XFMail.20040102163044.jhb@FreeBSD.org> <20040102224015.GI17023@cicely12.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
--neYutvxvOLaeuPCA Content-Type: text/plain; charset=us-ascii Content-Disposition: inline OK - this is not related to bridges and not to this special board. Today I saw this on an Asus P2B: pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00f0d10 pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard [...] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f at device 4.2 on pci0 pci_cfgintr: 0:4 INTD routed to irq 4 [...] sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A As the system is currently declared for testing it's much easier to test and debug this on that one. boot -v dmesg attached. -- B.Walter BWCT http://www.bwct.de ticso@bwct.de info@bwct.de --neYutvxvOLaeuPCA Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.c13" Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Mon Jan 5 03:50:08 CET 2004 ticso@cicely13.cicely.de:/var/d7/builder/c13-2003-11-22/src/sys/i386/compile/CICELY13-P2B Preloaded elf kernel "/boot/kernel/kernel" at 0xc0750000. Calibrating clock(s) ... i8254 clock: 1193157 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 334093181 Hz CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x650 Stepping = 0 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 167759872 (159 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x0000000009ce6fff, 155979776 bytes (38081 pages) avail memory = 157405184 (150 MB) bios32: Found BIOS32 Service Directory header at 0xc00f9d50 bios32: Entry = 0xf0520 (c00f0520) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x720 pnpbios: Found PnP BIOS data at 0xc00fd1a0 pnpbios: Entry = f0000:d1d0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00f0d10 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 1 0 12 A 0x60 3 4 5 7 9 10 11 12 slot 1 0 12 B 0x61 3 4 5 7 9 10 11 12 slot 1 0 12 C 0x62 3 4 5 7 9 10 11 12 slot 1 0 12 D 0x63 3 4 5 7 9 10 11 12 slot 2 0 11 A 0x61 3 4 5 7 9 10 11 12 slot 2 0 11 B 0x62 3 4 5 7 9 10 11 12 slot 2 0 11 C 0x63 3 4 5 7 9 10 11 12 slot 2 0 11 D 0x60 3 4 5 7 9 10 11 12 slot 3 0 10 A 0x62 3 4 5 7 9 10 11 12 slot 3 0 10 B 0x63 3 4 5 7 9 10 11 12 slot 3 0 10 C 0x60 3 4 5 7 9 10 11 12 slot 3 0 10 D 0x61 3 4 5 7 9 10 11 12 slot 4 0 9 A 0x63 3 4 5 7 9 10 11 12 slot 4 0 9 B 0x60 3 4 5 7 9 10 11 12 slot 4 0 9 C 0x61 3 4 5 7 9 10 11 12 slot 4 0 9 D 0x62 3 4 5 7 9 10 11 12 embedded 0 4 A 0x60 3 4 5 7 9 10 11 12 embedded 0 4 B 0x61 3 4 5 7 9 10 11 12 embedded 0 4 C 0x62 3 4 5 7 9 10 11 12 embedded 0 4 D 0x63 3 4 5 7 9 10 11 12 embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e4000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0117, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=4, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d800, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=4, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d400, size 5, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=4, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=255 map[90]: type 4, range 32, base 0000e800, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=4, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000d000, size 7, enabled map[14]: type 1, range 32, base e3000000, size 7, enabled pci_cfgintr_valid: BIOS irq 10 is valid pci_cfgintr: 0:10 INTA BIOS irq 10 found-> vendor=0x1011, dev=0x0009, revid=0x20 bus=0, slot=10, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=10 map[10]: type 1, range 32, base dc000000, size 26, enabled pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 0:12 INTA BIOS irq 11 found-> vendor=0x5333, dev=0x8901, revid=0x16 bus=0, slot=12, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0023, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xdfff pcib1: memory decode 0xe3f00000-0xe3efffff pcib1: prefetched decode 0xe4000000-0xe3ffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 isab0: <PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f at device 4.2 on pci0 pci_cfgintr_virgin: using routable interrupt 4 pci_cfgintr: 0:4 INTD routed to irq 4 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered intpm0: <Intel 82371AB Power management controller> port 0xe800-0xe80f irq 9 at device 4.3 on pci0 intpm0: I/O mapped e800 intpm0: intr IRQ 9 enabled revision 0 intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus generic I/O> on smbus0 intpm0: PM I/O mapped e400 de0: <Digital 21140A Fast Ethernet> port 0xd000-0xd07f mem 0xe3000000-0xe300007f irq 10 at device 10.0 on pci0 de0: Cogent 21140A [10-100Mb/s] pass 2.0 de0: address 00:00:92:9b:31:51 de0: bpf attached pci0: <display, VGA> at device 12.0 (no driver attached) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 14 devices, largest 114 bytes PNP0400: adding irq mask 0x80 PNP0400: adding io range 0x378-0x37f, size=0x8, align=0 PNP0400: adding io range 0x778-0x77f, size=0x8, align=0 pnpbios: handle 0 device ID PNP0400 (0004d041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0 pnpbios: handle 2 device ID PNP0501 (0105d041) PNP0501: adding irq mask 0x8 PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0 pnpbios: handle 3 device ID PNP0501 (0105d041) PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0 pnpbios: handle 4 device ID PNP0700 (0007d041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x9ffffff, size=0x9f00000 PNP0c01: adding fixed memory32 range 0xe8000-0xeffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000 PNP0c01: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000 PNP0c01: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 pnpbios: handle 6 device ID PNP0c01 (010cd041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x43, size=0x4, align=0 pnpbios: handle 8 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x71, size=0x2, align=0 pnpbios: handle 9 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0 PNP0303: adding io range 0x64-0x64, size=0x1, align=0 pnpbios: handle 10 device ID PNP0303 (0303d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xf0, size=0x1, align=0 pnpbios: handle 11 device ID PNP0c04 (040cd041) PNP0200: adding dma mask 0x10 PNP0200: adding io range 0-0xf, size=0x10, align=0 PNP0200: adding io range 0x80-0x90, size=0x11, align=0 PNP0200: adding io range 0x94-0x9f, size=0xc, align=0 PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0 pnpbios: handle 12 device ID PNP0200 (0002d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 13 device ID PNP0800 (0008d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 pnpbios: handle 14 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x290-0x297, size=0x8, align=0 PNP0c02: adding io range 0xe400-0xe43f, size=0x40, align=0 PNP0c02: adding io range 0xe800-0xe83f, size=0x40, align=0 pnpbios: handle 15 device ID PNP0c02 (020cd041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 ppc0: using extended I/O port range ppc0: SPP ppc0: <Parallel port> at port 0x378-0x37f on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Polled port ppi0: <Parallel I/O> on ppbus0 ppc1: using extended I/O port range ppc1: <Parallel port> failed to probe at port 0x278-0x27f on isa0 ppc2: using extended I/O port range ppc2: <Parallel port> failed to probe at port 0x3bc-0x3c3 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x1 0x1 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: configured irq 10 not in bitmap of probed irqs 0 sio2: port may not be enabled sio2: irq maps: 0x1 0x1 0x1 0x1 sio2: probe failed test(s): 0 1 2 4 6 7 9 sio2 failed to probe at port 0x3e8-0x3ef irq 10 on isa0 sio3: configured irq 11 not in bitmap of probed irqs 0 sio3: port may not be enabled sio3: irq maps: 0x1 0x1 0x1 0x1 sio3: probe failed test(s): 0 1 2 4 6 7 9 sio3 failed to probe at port 0x2e8-0x2ef irq 11 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices unknown: <PNP0400> can't assign resources (port) unknown: <PNP0400> at port 0x378-0x37f on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x2f8-0x2ff on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 Device configuration finished. procfs registered Timecounter "TSC" frequency 334093181 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata0-master: pio=0x0a wdma=0xffffffff udma=0xffffffff cable=40pin ata0-master: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=1<ILLEGAL_LENGTH> ata0-master: FAILURE setting PIO2 on Intel PIIX4 chip ata0-master: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=1<ILLEGAL_LENGTH> ata0-master: FAILURE setting PIO2 on Intel PIIX4 chip ad0: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=1<ILLEGAL_LENGTH> ad0: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=1<ILLEGAL_LENGTH> GEOM: create disk ad0 dp=0xc1fff160 ad0: <SAMSUNG CF/ATA/Rev 1.15> ATA-0 disk at ata0-master ad0: 61MB (125952 sectors), 246 C, 16 H, 32 S, 512 B ad0: 1 secs/int, 1 depth queue, BIOSPIO GEOM: new disk ad0 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 GEOM: Configure ad0a, start 0 length 64487424 end 64487423 GEOM: Configure ad0c, start 0 length 64487424 end 64487423 Mounting root from ufs:/dev/ad0a start_init: trying /sbin/init de0: enabling 100baseTX port --neYutvxvOLaeuPCA--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040105043334.GB17023>