Date: Tue, 31 Jul 2001 21:57:01 -0400 From: "Normand Leclerc" <leclercn@videotron.ca> To: <freebsd-alpha@freebsd.org> Subject: RE: Serial console gettytab Message-ID: <000001c11a2d$41d91200$1638a8c0@phobos> In-Reply-To: <20010731150738.A76404@dragon.nuxi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Then ... what's wrong with my setup? Do you have a 164sx with a serial console from which you can log on? I mean, messages from kernel looks fine, messages from userland is messed. If it can help, I am attaching part of the boot-up screen I get from the serial console. You'll see what I mean... Normand Leclerc leclercn@videotron.ca -----Original Message----- From: David O'Brien [mailto:dev-null@NUXI.com] Sent: Tuesday, July 31, 2001 6:08 PM To: leclercn@videotron.ca Cc: freebsd-alpha@freebsd.org Subject: Re: Serial console gettytab On Mon, Jul 30, 2001 at 04:13:58PM -0400, Normand Leclerc wrote: > I know my cable has CTS/RTS hooked right as the SRM is doing fine (and Having CTS/RTS does not mater -- I run all my Alpha's with only RX, TX, and GND. ------------ sio1 at port 0x2f8-0x2ff irq 3 flags 0x20000 on isa0 sio1: type ST16650A sio1: interrupting at ISA irq 3 ppc0: <Parallel port> at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: IEEE1284 device found Probing for PnP devices on ppbus0: lpt0: <Printer> on ppbus0 lpt0: Polled port ppc0: interrupting at ISA irq 7 ppc1: <Parallel port> at port 0x278-0x27f irq 5 on isa0 ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode lpt1: <Printer> on ppbus1 lpt1: Polled port ppc1: interrupting at ISA irq 5 Timecounter "alpha" frequency 533170336 Hz Waiting 8 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 6 lun 0 sa0: <HP HP35480A T603> Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 8) da2 at isp0 bus 0 target 2 lun 0da2: <SEAGATE ST19101N 0011> Fixed Direct Access SCSI-2 device da2: 20.000MB/s transfers (20.000MHz, offset 8), Tagged Queueing Enabled da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da0 at isp0 bus 0 target 0 lun 0 da0: <SEAGATE ST34572N 0784> Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (20.000MHz, offset 8), Tagged Queueing Enabled da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C) da1 at isp0 bus 0 target 1 lun 0 da1: <SEAGATE ST32550N 0016> Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da1: 2047MB (4194058 512 byte sectors: 255H 63S/T 261C) Mounting root from ufs:/dev/da1a cd1 at isp0 bus 0 target 6 lun 0 cd1: <NEC CD-ROM DRIVE:222 3.0i> Removable CD-ROM SCSI-2 device cd1: 7.575MB/s transfers (7.575MHz, offset 8) cd1: Attempt to query device size failed: NOT READY, Medium not present cd0 at ahc0 bus 0 target 4 lun 0 cd0: <YAMAHA CRW8424S 1.0j> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed (cd2:isp0:0:15:0): got CAM status 0x4a (cd2:isp0:0:15:0): fatal error, failed to attach to device (cd2:isp0:0:15:0): lost device (cd2:isp0:0:15:0): removing device entry ccd0-3: Concatenated disk drivers vinum: loaded vinum: reading configuration from /dev/da2f vinum: updating configuration from /dev/da0g vinum: /dev is m, not rebuildingswapon: adding / device Automatic boot i/dev/da1a: FILESYSTEM CLEANS /dev/da1a: clean, 56324 fre90 blocks, 0.4% /dev/vinum/home:N; SKIPPING CHECome: clean, 2393rags, 298864 blontation) /dev/da1e: FILESYSTEM CLEANS /dev/da1e: cl(268 frags, 1189ragmentation) /STEM CLEAN; SKIPv/da2g: clean, 38 frags, 478733 gmentation) /deTEM CLEAN; SKIPP/ccd0c: clean, 7rags, 99182 bloctation) /dev/daLEAN; SKIPPING C: clean, 681307 s, 83108 blocks,ion) /dev/da0f:N; SKIPPING CHEClean, 267486 fre403 blocks, 0.0% Doing initial ne hostname domain. ifconfig: ioctl (SIOCAIFAD: File exists ifconfig: ioctl (SIOCAIFAD: File exists ifconfig: ioctl (SIOCAIFAD ifconfig: ioctl (SIOCAIFAD ifconfig: ioctl ile exists ifconfig: ioctl ile exists ifconfig: ioctl ile exists xl0: flags=8843<NING,SIMPLEX,MUL inet 192.168.ffffff80 broadca7 inet6 fe80::c%xl0 prefixlen peid 0x1 inetetmask 0xffffff8168.56.127 inenetmask 0xffffff.168.56.127 in netmask 0xfffff2.168.56.127 i4 netmask 0xffff92.168.56.127 35 netmask 0xfff192.168.56.127 .36 netmask 0xff 192.168.56.127 6.37 netmask 0xft 192.168.56.1274:75:94:0c me(100baseTX) statported media: auTX <full-duplex>eT/UTP <full-dup 100baseTX <hw-llags=8049<UP,LOOLTICAST> mtu 163:1%lo0 prefixlen inet6 ::1 preet 127.0.0.1 net add net defaul68.56.126 Addittions: TCP keepang daemons:. Do setup:add net :ateway ::1 add ateway ::1 net.ding: 0 -> 0 nept_rtadv: 0 -> 0accept_rtadv: 0 add net fe80::: add net ff02::: 0:4ff:fe75:940c%ND default inter IPv4 mapped IPvt=YES. Additional daemo syslogd. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001c11a2d$41d91200$1638a8c0>