From owner-freebsd-current Sat Oct 17 04:10:24 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id EAA01894 for freebsd-current-outgoing; Sat, 17 Oct 1998 04:10:24 -0700 (PDT) (envelope-from owner-freebsd-current@FreeBSD.ORG) Received: from caladan.tdx.co.uk (caladan.tdx.co.uk [195.188.177.4]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id EAA01884 for ; Sat, 17 Oct 1998 04:10:15 -0700 (PDT) (envelope-from kpielorz@tdx.co.uk) Received: from tdx.co.uk (lorca-tx.tdx.co.uk [195.188.177.242]) by caladan.tdx.co.uk (8.9.1a/8.9.1) with ESMTP id MAA00275 for ; Sat, 17 Oct 1998 12:09:54 +0100 (BST) Message-ID: <36287AC1.3F0C0D9C@tdx.co.uk> Date: Sat, 17 Oct 1998 12:08:49 +0100 From: Karl Pielorz Organization: TDX - The Digital eXchange X-Mailer: Mozilla 4.5b2 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: current@FreeBSD.ORG Subject: SCSI / CAM error or warning output? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi All (again?) This might be considered slightly more -hardware oriented, but I thought -current was probably more appropriate as current probably has the later version of CAM... My system's started spitting these out on the console, whilst I can get the 'jist' of what it's trying to say, can someone translate for me? (and tell me whether it's good or bad?) - system is -current as of 10/16 @ 16:43... ahc2 is a 2940UW, with 3 x Quantum drives on it. First 2 are un-terminated, third is using onboard active termination, controller is set to terminate high & low bits. Cable is a nice Adaptec cable (so _please_ don't tell me it's termination )... This happens when the drives are 'busy' (but not totally thrashed)... " ahc2:A:8: no active SCB for reconnecting target - issuing BUS DEVICE RESET SAVED_TCL == 0x80, ARG_1 == 0x1b, SEQ_FLAGS == 0x40 ahc2: Bus Device Reset on A:8. 6 SCBs aborted (da4:ahc2:0:8:0): tagged openings now 64 (da4:ahc2:0:8:0): tagged openings now 63 Timedout SCB handled by another timeout (da5:ahc2:0:9:0): data overrun detected in Data-In phase. Tag == 0x2. (da5:ahc2:0:9:0): Have seen Data Phase. Length = 8192. NumSGs = 1. Timedout SCB handled by another timeout ahc2: WARNING no command for scb 65 (cmdcmplt) QOUTPOS = 1 ahc2: WARNING no command for scb 65 (cmdcmplt) QOUTPOS = 34 ahc2: WARNING no command for scb 65 (cmdcmplt) QOUTPOS = 43 ahc2: WARNING no command for scb 1 (cmdcmplt) QOUTPOS = 58 ahc2:A:10: ahc_intr - referenced scb not valid during seqint 0x71 scb(1) ahc2: WARNING no command for scb 1 (cmdcmplt) QOUTPOS = 67 " DMesg for ah2 is: " ahc2: rev 0x00 int a irq 19 on pci0.20.0 ahc2: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs " Drives are: " da4 at ahc2 bus 0 target 8 lun 0 da4: Fixed Direct Access SCSI2 device da4: 20.0MB/s transfers (10.0MHz, offset 8, 16bit), Tagged Queueing Enabled da4: 4148MB (8496960 512 byte sectors: 255H 63S/T 528C) da5 at ahc2 bus 0 target 9 lun 0 da5: Fixed Direct Access SCSI2 device da5: 20.0MB/s transfers (10.0MHz, offset 8, 16bit), Tagged Queueing Enabled da5: 4148MB (8496960 512 byte sectors: 255H 63S/T 528C) da6 at ahc2 bus 0 target 10 lun 0 da6: Fixed Direct Access SCSI2 device da6: 20.0MB/s transfers (10.0MHz, offset 8, 16bit), Tagged Queueing Enabled da6: 4148MB (8496960 512 byte sectors: 255H 63S/T 528C) " Regards, Karl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message