Date: Mon, 11 Dec 1995 17:54:51 -0800 From: Gary Crutcher <gcrutchr@nightflight.com> To: questions@freebsd.org Cc: hackers@freebsd.org Subject: Routing help Message-ID: <199512120154.RAA01954@nightflight.com>
next in thread | raw e-mail | index | archive | help
I have switched over from PPP to a 56 KB frame relay. My host machine is
205.162.141.1. My router is 205.162.141.14. I have an ethernet card in the
FreeBSD box. I have a laptop connected via RG54 at 205.162.141.3. I am
getting the following message when booting up(Note the arpresolve):
de0 <Digital DC21041 Ethernet> rev 17 int a irq 15 on pci0:20
reg16: ioaddr=0xfc80 size=0x80
de0: DC21041 [10Mb/s] pass 1.1 Ethernet address 00:00:c0:b0:89:be
pci0: uses 8388736 bytes of memory from ff000000 upto ffbdffff.
pci0: uses 128 bytes of I/O space from fc80 upto fcff.
changing root device to sd0a
de0: enabling 10baseT/UTP port
arpresolve: can't allocate llinfo
arpresolve: can't allocate llinfo
arpresolve: can't allocate llinfo
arpresolve: can't allocate llinfo
arpresolve: can't allocate llinfo
arpresolve: can't allocate llinfo
Here is my sysconfig file:
=================sysconfig========
network_interfaces="de0 lo0"
ifconfig_de0="inet nightflight 204.212.233.253 netmask 0xfffffff0"
ifconfig_lo0="inet localhost 205.162.141.14 netmask 0xfffffff0"
static_routes="multicast loopback router"
route_multicast="224.0.0.0 -netmask 0xf0000000 -interface ${hostname}"
route_loopback="${hostname} localhost"
route_router="205.162.141.1 -netmask 0xfffffff0 -interface 205.162.141.14"
defaultrouter=205.162.141.14
routedflags=-s
Here is my gateways file:
=================gateways==========
host 204.212.233.253 gateway 204.212.233.128 metric 1 active
host 204.212.233.128 gateway 205.162.141.14 metric 1 active
host 205.162.141.1 gateway 205.162.141.14 metric 1 active
Any help would be greatly appreciated.
Thank you,
Gary Crutcher
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199512120154.RAA01954>