From owner-freebsd-net Wed Nov 3 5:31:34 1999 Delivered-To: freebsd-net@freebsd.org Received: from nippon.highcaliber.com (nippon.highcaliber.com [206.217.210.2]) by hub.freebsd.org (Postfix) with ESMTP id BFBD014C40 for ; Wed, 3 Nov 1999 05:31:30 -0800 (PST) (envelope-from Andre@HighCaliber.com) Received: from pavilion ([206.217.210.242]) by nippon.highcaliber.com (post.office MTA v1.9.3 ID# 0-16273) with SMTP id AAA82; Wed, 3 Nov 1999 08:32:41 -0500 Message-ID: <000f01bf2600$1cc521c0$010a0a0a@pavilion> Reply-To: "HIGHCALIBER.COM - Andre" From: Andre@HighCaliber.com (Andre Chang) To: "Mike Tancsa" Cc: References: <381a2d12.436676377@mail.sentex.net> Subject: Re: Third Ethernet card "fxp2" Date: Wed, 3 Nov 1999 08:34:10 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-net@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Hi, Thanks, There are no IDE devices in the machine and there is a 7860 chip on the motherboard. I finally resolved the problem by moving the card from slot 1 to slot 4 (PCI) I believe that there must have been some IRQ conflict. I'll have to look that over again as I would like to put a scsi controller in the free PCI slot. Does anyone know if the fxp driver supports IRQ sharing?. with the newer motherboards I've come across a lot of IRQ's assigned to more than one slot. Thanks again. -- Andre. ----- Original Message ----- From: Mike Tancsa To: Andre Chang Cc: Sent: Friday, October 29, 1999 8:27 PM Subject: Re: Third Ethernet card "fxp2" > On 29 Oct 1999 14:06:46 -0400, in sentex.lists.freebsd.net you wrote: > > >Hello, > > > >I'd like to know if there are any known issues when enabling a 3rd ethernet > >interface on a system config'd as follows > > > >1 PR440FX > >2 Pentium Pro Processors > >128MB RAM > >SCSI HDD and CDROM > >3 Intel EtherExpress Pro 10/100B adapters (fxp0 is onboard) > > > >3.3-STABLE FreeBSD 3.3-STABLE #3: Sat Oct 23 15:57:22 EST 1999 > >SMP Kernel > >IPFW enabled > >NATD enabled > > There shouldnt be.. On one of my machines, > > grep fxp /etc/rc.conf > network_interfaces="fxp0 fxp1 fxp2 fxp3 lo0" > > A couple of things to check perhaps, > > try and make sure the cards all have their individual IRQs, and that if > there are no IDE drives in the box, disable the IDE controllers so that > they dont take up IRQs and DMA resources. What sort of SCSI controller do > you have ? > > ---Mike > Mike Tancsa (mdtancsa@sentex.net) > Sentex Communications Corp, > Waterloo, Ontario, Canada > "Given enough time, 100 monkeys on 100 routers > could setup a national IP network." (KDW2) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message