Date: Mon, 25 Oct 1999 15:17:20 -0400 From: Peter Radcliffe <pir@pir.net> To: mobile@freebsd.org Subject: Re: Will the owner of a DFE-650 D-LINK Fast Ethernet card stand up Message-ID: <19991025151720.G22684@pir.net> In-Reply-To: <199910251901.NAA42191@harmony.village.org> References: <199910251901.NAA42191@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Warner Losh <imp@village.org> probably said:
> I have a DFE-650 D-Link fast ethernet card sitting on my desk that
...
> Second, does anybody know if this has ever worked with FreeBSD? I'm
> having trouble getting pccardd to map the memory that I see from
> dumpcis that it has. :-(
I use one with 3.3-R + PAO with no problems[1] with ed.
Don't think it's supported under FreeBSD without PAO.
*pulls out and fires up laptop*
Oct 25 15:14:18 disapp pccardd[412]: Card "D-Link"("DFE-650")
[Fast Ethernet] [(null)] matched "D-Link" ("DFE-650") [(null)] [(null)]
Oct 25 15:14:21 disapp root: D-link DFE-650 inserted
card0: assign ed0 iobase 0x260 irq 10 flags 0x14
ed0: address 00:80:c8:8d:f4:cb, type Linksys (16 bit)
# D-Link DFE-650 Ethernet Card
card "D-Link" "DFE-650"
config default "ed0" any 0x14
insert logger -s D-link DFE-650 inserted
insert /etc/pccard_ether $device
remove logger -s D-link DFE-650 removed
remove /etc/pccard_ether_remove $device
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: d1 3a ff
Common memory device information:
Device number 1, type Function specific, WPS = OFF
Speed = 250nS, Memory block size = 8Kb, 8 units
Tuple #2, code = 0x1c (Other conditions for common memory), length = 4
000: 01 d1 3a ff
(MWAIT)
Tuple #3, code = 0x17 (Attribute memory descriptor), length = 3
000: 41 00 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 250nS, Memory block size = 512b, 1 units
Tuple #4, code = 0x20 (Manufacturer ID), length = 4
000: 49 01 30 02
PCMCIA ID = 0x149, OEM ID = 0x230
Tuple #5, code = 0x21 (Functional ID), length = 2
000: 06 01
Network/LAN adapter - POST initialize
Tuple #6, code = 0x15 (Version 1 info), length = 38
000: 04 01 44 2d 4c 69 6e 6b 00 44 46 45 2d 36 35 30
010: 00 46 61 73 74 20 45 74 68 65 72 6e 65 74 00 ff
020: 00 00 00 00 00 00
Version = 4.1, Manuf = [D-Link], card vers = [DFE-650]
Addit. info = [Fast Ethernet]
Tuple #7, code = 0x1a (Configuration map), length = 5
000: 01 20 00 04 0b
Reg len = 2, config register addr = 0x400, last config = 0x20
Registers: XX-X----
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: e0 81 18 45 30 fc be
Config index = 0x20(default)
Interface byte = 0x81 (I/O) wait signal supported
Card decodes 5 address lines, limited 8/16 Bit I/O
IRQ modes: Level
IRQs: 2 3 4 5 6 7 9 10 11 12 13 15
Tuple #9, code = 0x14 (No link), length = 0
Tuple #10, code = 0xff (Terminator), length = 0
1 slots found
P.
[1] Beyond it not negotiating 10bT FDX with my switch, when it does this
perfectly well under 'doze :(
--
pir pir@pir.net pir@net.tufts.edu
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991025151720.G22684>