Date: Sat, 04 Dec 1999 16:04:19 +0100 From: Luke Roberts <luke@roberts.nl> To: freebsd-isdn@FreeBSD.ORG Subject: FOR ERNST Re: ISDN problem on FreeBSD 3.2 Message-ID: <4.2.2.19991204153035.00ae6190@pop.roberts.nl> In-Reply-To: <38491594.92396BCC@znerd.demon.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
--=====================_3585364==_
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sorry about this,
I took the time to help a Fellow Dutchman to get i4b up and running but
wafter ryping out the mail see that his e-mail address ernst@jollem.com
doesn't exist. I hope he reads it like this in stead.
Cheers,
Luke
Hee Ernst,
Heb jij even mazzel dat ik FreeBSD 3.2 & i4b & Teles 16.0/3 gebruik en ook
nog eens bij Demon internet.
Hier heb je de oplossing:
Eerst overinstall i4b 0.83 (jij gebruikt nog 0.70). Zorg ervoor dat je de
juiste settings in je kernel plaatst. Rebuild dan je kernel.
i4B moet nu klaar zijn.
Nu nog de firewall & NATd XNTPD time :
Vervolgens zorg je dat je Firewall & NATd aan staat (zie rc.firewall en
natd.conf voor config)
Vervolgens plaats je de scripts die ik je heb gegeven in /etc
isdn-up, isdn-down, ppp-demon.rc (wijzig hierin je wachtwoord) plaats je in
/etc/isdn
ntpd.conf is de configuratie file voor xntpd time deamon. (zie rc.local
waarin XNTPD wordt opgestart).
Als je dit allemaal hebt gedaan dan start je je ISDN settings op door in
/etc ./godemon.rc in te voeren. Je krijgt dan een full screen scherm te
zien waarop de verbindings status staat.
Succes!
Luke
>Hi Hellmuth Michaelis and all,
>
>I'm switching from Linux to FreeBSD (or at least trying to), and
>attempt to get ISDN running on FreeBSD, but fail. I've read the FAQ,
>the handbook section on FreeBSD and the PS document "The Care and
>Feeding of ISDN4BSD". MMy problem: I'm not wuite sure what to do
>after rebuilding the kernel with the options for ISDN, configuring
>isdnd.rc and starting the isdnd.
>
>The isdnd daemon fails to connect to my internet service provider
>due to Layer 1 problems.
>
>Does anyone have any pointers to other forms of documentation for
>ISDN, a "troubleshooting" section somewhere or "check-list"? I've
>checked the available FAQ, the Handbook and I've searched the
>archives, but haven't been able to find anything relevant.
>
>I own a Teles 16.0/3 (ISA, Siemens chipset). Below is more info on
>what I did, have and got: (:-)
>
>
>
>I've written a call-demon script that calls my ISP, Demon. I
>followed
>the instructions in the i4b docs. Then I've written a start-isdnd
>script
>that should start the isdn daemon process. Below is the result of
>the
>execution of call-demon, the result of start-isnd and the result of
>the
>re-executed call-demon script after the start-isdnd script.
>
>After that I've included a lot of other info, including the source
>of
>the scripts, my kernel and isdn configuration files and a system
>description.
>
>
> +-------------------------------------+
> | step 1: execute "call-demon" |
> +-------------------------------------+
>
>------- output of "call-demon" -------
>--- Removing previous configuration ---
>ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address
>
>--- Setting Demon PPP account options ---
>
>--- Configuring IP src/dest, netmask and link flags ---
>ifconfig: ioctl (SIOCAIFADDR): File exists
>
>--- Finished ---
>
>
>
> +--------------------------------------+
> | step 2: execute "start-isdnd" |
> +--------------------------------------+
>
>------- output of "start-isdnd" -------
>Nov 18 20:38:31 heinz isdnd[333]: DMN init_controller_state:
>controller
>0
> is Teles S0/16.3
>Nov 18 20:38:31 heinz isdnd[333]: DMN init_controller: found 1 ISDN
>controller(s
>)
>Nov 18 20:38:31 heinz isdnd[333]: WRN error open
>/etc/isdn/isdnd.rates:
>No such
>file or directory
>Nov 18 20:38:31 heinz isdnd[333]: DMN daemon started (pid = 333)
>
>
>------- output on virtual console 4 -------
>----- isdn controller state -------------- isdnd 00.70.0 [pid 333]
>----
>c tei b remote iface dir outbytes obps inbytes ibps
>units
>0 --- 1
> L12 2
>---- isdn userland interface state
>------------------------------------
>isp0
>---- isdn logfile display
>---------------------------------------------
>18.11.1999 20:38:31 DMN daemon started up (pid = 33)
>
>
>
> +----------------------------------------+
> | step 3: re-execute "call-demon" |
> +----------------------------------------+
>
>------- output to "/var/log/messages" -------
>
>Nov 18 20:38:31 heinz isdnd[333]: DMN init_controller_state:
>controller
>0 is Teles S0/16.3
>Nov 18 20:38:31 heinz isdnd[333]: DMN init_controller: found 1 ISDN
>controller(s)
>Nov 18 20:38:31 heinz isdnd[333]: WRN error open
>/etc/isdn/isdnd.rates:
>No such file or directory
>Nov 18 20:38:31 heinz isdnd[333]: DMN daemon started (pid = 333)
>Nov 18 20:45:43 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:45:43 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:45:43 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x4
>Nov 18 20:45:43 heinz /kernel: i4b-L1-isic_recover: ISAC: CISQ =
>0x1e
>Nov 18 20:45:43 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:45:43 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:45:43 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:45:43 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:45:43 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:45:45 heinz /kernel: i4b-L3-T303_timeout: SETUP not
>answered,
>cr = 111
>Nov 18 20:45:45 heinz /kernel: i4b-L3-next_l3state: FSM illegal
>state,
>state = ST_OW - Out Wait EST, event = EV_T303EXP - T303 timeout!
>Nov 18 20:45:45 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:45:45 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:45:45 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:45:45 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:45:45 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:45:45 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:45:45 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:45:45 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:45:47 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:45:47 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:45:47 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:45:49 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:45:49 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:45:49 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:45:49 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:45:49 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:45:49 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:45:49 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:45:49 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:45:51 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:45:51 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:45:51 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:45:53 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:45:53 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:45:53 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:45:53 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:45:53 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:45:53 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:45:53 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:45:53 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:45:55 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:45:55 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:45:55 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:45:57 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:45:57 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:45:57 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:45:57 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:45:57 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:45:57 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:45:57 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:45:57 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:45:57 heinz /kernel: i4b-L2-i4b_mph_status_ind: unit 0,
>cannot
>access S0 bus!
>Nov 18 20:45:57 heinz /kernel: i4b-L3-i4b_mdl_status_ind:
>STI_NOL1ACC:
>unit 0 no outgoing access to S0
>Nov 18 20:45:57 heinz isdnd[333]: ERR set_channel_idle: controller
>[0],
>invalid channel [-1]!
>Nov 18 20:45:57 heinz isdnd[333]: ERR msg_disconnect_ind:
>set_channel_idle failed!
>Nov 18 20:46:00 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:46:00 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:46:00 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:46:00 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:46:00 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:46:00 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:46:00 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:00 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:46:00 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:02 heinz /kernel: i4b-L3-T303_timeout: SETUP not
>answered,
>cr = 48
>Nov 18 20:46:02 heinz /kernel: i4b-L3-next_l3state: FSM illegal
>state,
>state = ST_OW - Out Wait EST, event = EV_T303EXP - T303 timeout!
>Nov 18 20:46:02 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:02 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:02 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:46:02 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:46:02 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:46:02 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:46:02 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:46:02 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:46:04 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:04 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:46:04 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:06 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:06 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:06 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:46:06 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:46:06 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:46:06 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:46:06 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:46:06 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:46:08 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:08 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:46:08 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:10 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:10 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:10 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:46:10 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:46:10 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:46:10 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:46:10 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:46:10 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:46:12 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:12 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:46:12 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:14 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:14 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:14 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:46:14 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:46:14 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:46:14 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:46:14 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:46:14 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:46:14 heinz /kernel: i4b-L2-i4b_mph_status_ind: unit 0,
>cannot
>access S0 bus!
>Nov 18 20:46:14 heinz /kernel: i4b-L3-i4b_mdl_status_ind:
>STI_NOL1ACC:
>unit 0 no outgoing access to S0
>Nov 18 20:46:14 heinz isdnd[333]: WRN msg_disconnect_ind: cdid not
>found
>Nov 18 20:46:14 heinz isdnd[333]: ERR set_channel_idle: controller
>[0],
>invalid channel [-1]!
>Nov 18 20:46:14 heinz isdnd[333]: ERR msg_disconnect_ind:
>set_channel_idle failed!
>Nov 18 20:46:17 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:46:17 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:46:17 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:46:17 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:46:17 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:46:17 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:46:17 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:17 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:46:17 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:19 heinz /kernel: i4b-L3-T303_timeout: SETUP not
>answered,
>cr = 53
>Nov 18 20:46:19 heinz /kernel: i4b-L3-next_l3state: FSM illegal
>state,
>state = ST_OW - Out Wait EST, event = EV_T303EXP - T303 timeout!
>Nov 18 20:46:19 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:19 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:19 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:46:19 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:46:19 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:46:19 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:46:19 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:46:19 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:46:21 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:21 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:46:21 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:23 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:23 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:23 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:46:23 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:46:23 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:46:23 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:46:23 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:46:23 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:46:25 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:25 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:46:25 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:27 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:27 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:27 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:46:27 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:46:27 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:46:27 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:46:27 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:46:27 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:46:29 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:29 heinz /kernel: i4b-L1-ph_data_req: still in state
>F3!
>Nov 18 20:46:29 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:31 heinz /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202
>= 3
>Nov 18 20:46:31 heinz /kernel: i4b-L1-ph_data_req: No Space in TX
>FIFO,
>state = F4 Awaiting Signal
>Nov 18 20:46:31 heinz /kernel: i4b-L1-timer3_expired: state = F4
>Awaiting Signal
>Nov 18 20:46:31 heinz /kernel: i4b-L1-isic_recover: HSCX B: ISTA =
>0x0
>Nov 18 20:46:31 heinz /kernel: i4b-L1-isic_recover: ISAC: ISTA =
>0x0
>Nov 18 20:46:31 heinz /kernel: i4b-L1-isic_recover: HSCX B: IMASK =
>0xff
>Nov 18 20:46:31 heinz /kernel: i4b-L1-isic_recover: HSCX A: IMASK =
>0xf8
>Nov 18 20:46:31 heinz /kernel: i4b-L1-isic_recover: ISAC: IMASK =
>0x2a
>Nov 18 20:46:31 heinz /kernel: i4b-L2-i4b_mph_status_ind: unit 0,
>cannot
>access S0 bus!
>Nov 18 20:46:31 heinz /kernel: i4b-L3-i4b_mdl_status_ind:
>STI_NOL1ACC:
>unit 0 no outgoing access to S0
>Nov 18 20:46:31 heinz isdnd[333]: WRN msg_disconnect_ind: cdid not
>found
>Nov 18 20:46:31 heinz isdnd[333]: WRN msg_disconnect_ind: cdid not
>found
>Nov 18 20:46:31 heinz isdnd[333]: ERR set_channel_idle: controller
>[0],
>invalid channel [-1]!
>Nov 18 20:46:31 heinz isdnd[333]: ERR msg_disconnect_ind:
>set_channel_idle failed!
>
>
>
> +-------------------------------------------------+
> | extra info on my system and configuration |
> +-------------------------------------------------+
>
>------- output on kernel startup --------
>isic0 at 0xd80 irq 5 flags 0x3 on isa
>isic0: Teles S0/16.3
>isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2)
>(Addr=0x960)
>isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x160, AddrB=0x560)
>:
>(skipping)
>:
>i4b: ISDN call control device attached
>i4bisppp: 4 ISDN SyncPPP device(s) attached
>i4bctl: ISDN system control port attached
>i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header
>compression)
>i4btel: 4 ISDN telephony interface device(s) attached
>i4brbch: 4 raw B channel access device(s) attached
>i4btrc: 4 ISDN trace device(s) attached
>
>
>------- "start-isdnd" script: -------
>#!/bin/sh
>echo "--- Starting isdnd on virtual console 4 ---"
>isdnd -b -f -r /dev/ttyv4 -t cons25
>
>
>------- "call-demon" script -------
>#!/bin/sh
>echo "--- Removing previous configuration ---"
>ifconfig isp0 delete -link1 down
>
>echo ""
>echo "--- Setting Demon PPP account options ---"
>spppcontrol isp0 myauthproto=chap
>spppcontrol isp0 myauthname=pharao
>spppcontrol isp0 myauthsecret=abcd098
>
>echo ""
>echo "--- Configuring IP src/dest, netmask and link flags ---"
>ifconfig isp0 210.237.109.231 192.157.77.212 netmask 0xffffffff
>link1
>
>echo ""
>echo "--- Finished ---"
>
>
>------- my "/etc/isdn/isdnd.rc" -------
>system
>
>acctall = on # generate info for everything
>acctfile = /var/log/isdnd.acct # name & location of accounting file
>useacctfile = yes # generate accouting info to file
>
>monitor-allowed = yes # global switch: monitor on/off
>monitor-port = 451 # default monitor TCP port
>
>monitor = "/var/run/isdn-monitor"
>monitor-access = fullcmd
>monitor-access = channelstate, logevents
>monitor-access = callin, callout
>
>rtprio = 25 # modify isdnd's process priority
>
>entry
>
>name = demon # symbolic name for this entry
>
>isdncontroller = 0 # controller to use or -1 to use any
>isdnchannel = 0 # channel (1/2) to use or 0/-1 for any
>
>usrdevicename = isp # ipr, isp, tel, rbch
>usrdeviceunit = 0 # unit number
>
>direction = out # in, out, inout
>local-phone-dialout = 0332793895 # this is my number
>remote-phone-dialout = 0334489909 # i call this remote number
>dialout-type = normal # normal / calledback
>dialin-reaction = ignore # ignore incoming calls
>b1protocol = hdlc # hdlc, raw
>
>dialretries = 3 # number of dial retries
>dialrandincr = on # random dial increment time
>recoverytime = 3 # time to wait between 2 dial tries
>usedown = off # set i/f down
>
>ratetype = 0 # ratesfile entry to use
>unitlength = 90 # unitlength to assume
>unitlengthsrc = rate # none, rate, cmdl, conf, aocd
>idletime-incoming = 120 # incoming call idle timeout
>idletime-outgoing = 60 # outgoing call idle timeout
>earlyhangup = 5 # time to hangup before an expected
> # next charging unit will occur
>
>------- result of "uname -a" -------
>FreeBSD heinz.znerd.com 3.2-RELEASE FreeBSD 3.2-RELEASE #2: Wed Oct
>13
>21:26:52
>GMT 1999 root@heinz.znerd.com:/usr/src/sys/compile/GENERIC i386
>
>
>------- Hardware info -------
>Pentium II 412 MHz CPU (PCI bus 103 MHz) -- originally 400/100
>1 x 128 MB DIMM 100 MHz (PC-100)
>IDE 2x FreeBSD partition (non-dedicated) is on IDE0, slave
>Diamond Viper V550 (Nvidia Riva TNT)
>On the ISA bus:
>. 3Com 3C509-B Ethernet card
>. Teles 16.0/3 ISDN card
>On the PCI bus:
>. SoundBlaster Live!
>. Dynalink IS64PPH(+) -- My winblows ISDN card, Winbond chipset
>
>
>------- kernel config file /usr/src/sys/i386/conf/GENERIC -------
>machine "i386"
>cpu "I386_CPU"
>cpu "I486_CPU"
>cpu "I586_CPU"
>cpu "I686_CPU"
>ident GENERIC
>maxusers 32
>
>options MATH_EMULATE #Support for x87 emulation
>options INET #InterNETworking
>options FFS #Berkeley Fast Filesystem
>options FFS_ROOT #FFS usable as root device [keep
>this!]
>options MFS #Memory Filesystem
>options MFS_ROOT #MFS usable as root device, "MFS"
>req'ed
>options NFS #Network Filesystem
>options NFS_ROOT #NFS usable as root device, "NFS"
>req'ed
>options MSDOSFS #MSDOS Filesystem
>options "CD9660" #ISO 9660 Filesystem
>options "CD9660_ROOT" #CD-ROM usable as root. "CD9660"
>req'ed
>options PROCFS #Process filesystem
>options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
>options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device
>options UCONSOLE #Allow users to grab the console
>options FAILSAFE #Be conservative
>options USERCONFIG #boot -c editor
>options VISUAL_USERCONFIG #visual boot -c editor
>
>config kernel root on wd0
>
>controller isa0
>controller pnp0
>controller eisa0
>controller pci0
>
>controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
>disk fd0 at fdc0 drive 0
>disk fd1 at fdc0 drive 1
>
>options "CMD640" # work around CMD640 chip deficiency
>controller wdc0 at isa? port "IO_WD1" bio irq 14
>disk wd0 at wdc0 drive 0
>disk wd1 at wdc0 drive 1
>
>controller wdc1 at isa? port "IO_WD2" bio irq 15
>disk wd2 at wdc1 drive 0
>disk wd3 at wdc1 drive 1
>
>options ATAPI #Enable ATAPI support for IDE bus
>options ATAPI_STATIC #Don't do it as an LKM
>device acd0 #IDE CD-ROM
>device wfd0 #IDE Floppy (e.g. LS-120)
>
>controller ncr0
>controller ahb0
>controller ahc0
>controller isp0
>
>controller dpt0
>
>controller adv0 at isa? port ? cam irq ?
>controller adw0
>controller bt0 at isa? port ? cam irq ?
>controller aha0 at isa? port ? cam irq ?
>
>controller scbus0
>
>device da0
>
>device sa0
>
>device pass0
>
>device cd0 #Only need one of these, the code dynamically grows
>
>device wt0 at isa? port 0x300 bio irq 5 drq 1
>device mcd0 at isa? port 0x300 bio irq 10
>
>controller matcd0 at isa? port 0x230 bio
>
>device scd0 at isa? port 0x230 bio
>
>controller atkbdc0 at isa? port IO_KBD tty
>device atkbd0 at isa? tty irq 1
>device psm0 at isa? tty irq 12
>
>device vga0 at isa? port ? conflicts
>
>pseudo-device splash
>
>device sc0 at isa? tty
>
>device npx0 at isa? port IO_NPX irq 13
>
>device apm0 at isa? disable flags 0x31 # Advanced Power
>Management
>
>device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
>device sio1 at isa? port "IO_COM2" tty irq 3
>device sio2 at isa? disable port "IO_COM3" tty irq 5
>device sio3 at isa? disable port "IO_COM4" tty irq 9
>
>device ppc0 at isa? port? flags 0x40 net irq 7
>controller ppbus0
>device lpt0 at ppbus?
>device plip0 at ppbus?
>device ppi0 at ppbus?
>
>device ax0 # ASIX AX88140A
>device de0 # DEC/Intel DC21x4x (``Tulip'')
>device fxp0 # Intel EtherExpress PRO/100B (82557, 82558)
>device mx0 # Macronix 98713/98715/98725 (``PMAC'')
>device pn0 # Lite-On 82c168/82c169 (``PNIC'')
>device rl0 # RealTek 8129/8139
>device tl0 # Texas Instruments ThunderLAN
>device tx0 # SMC 9432TX (83c170 ``EPIC'')
>device vr0 # VIA Rhine, Rhine II
>device vx0 # 3Com 3c590, 3c595 (``Vortex'')
>device wb0 # Winbond W89C840F
>device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'')
>
>device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000
>device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000
>device ep0 at isa? port 0x300 net irq 10
>device ex0 at isa? port? net irq?
>device fe0 at isa? port 0x300 net irq ?
>device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
>device lnc0 at isa? port 0x280 net irq 10 drq 0
>device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000
>device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000
>device cs0 at isa? port 0x300 net irq ?
>
>pseudo-device loop
>pseudo-device ether
>pseudo-device sl 1
>pseudo-device ppp 1
>pseudo-device tun 1
>pseudo-device pty 16
>pseudo-device gzip # Exec gzipped a.out's
>
>options KTRACE #kernel tracing
>
>options SYSVSHM
>options SYSVMSG
>options SYSVSEM
>
>
>options "TEL_S0_16_3"
>device isic0 at isa? port 0xd80 net irq 5 flags 3 vector isicintr
>
>pseudo-device
>"i4bq921"
>pseudo-device
>"i4bq931"
>pseudo-device "i4b"
>
>pseudo-device "i4btrc" 4
>pseudo-device "i4bctl"
>pseudo-device "i4brbch" 4
>pseudo-device "i4btel" 4
>pseudo-device "i4bipr" 4
>pseudo-device "i4bisppp" 4
>pseudo-device sppp 4
>
>options IPR_VJ
>
>
>Ernst de Haan wrote:
> >
> > Hi Hellmuth Michaelis and all,
> >
> > I'm switching from Linux to FreeBSD, and attempt to get ISDN running on
> > FreeBSD, but fail. I've read the FAQ, the handbook section on FreeBSD
> > and the PS document "The Care and Feeding of ISDN4BSD".
> >
> > My problem: I'm not wuite sure what to do after rebuilding the kernel
> > with the options for ISDN, configuring isdnd.rc and starting the isdnd.
> > The isdnd daemon fails to connect to my internet service provider due to
> > Layer 1 problems.
> >
> > Does anyone have any pointers to other forms of documentation for ISDN,
> > a "troubleshooting" section somewhere or "check-list"?
> >
> > I own a Teles 16.0/3 (ISA, Siemens chipset). I can provide more
> > information if anyone cares (:-)
> >
> > GreetinX++,
> >
> > Ernst
> >
> > --
> > Ernst de Haan
> > Freelance Java Architect
> >
> > "Come to me all who are weary and burdened,
> > and I will give you rest" -- Jesus Christ
>
>--
>Ernst de Haan
>Freelance Java Architect
>
>"Come to me all who are weary and burdened,
>and I will give you rest" -- Jesus Christ
>
>
>To Unsubscribe: send mail to majordomo@FreeBSD.org
>with "unsubscribe freebsd-isdn" in the body of the message
--=====================_3585364==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="rc.local"
# put your local stuff here
echo "starting local time deamon" && /usr/sin/xntpd
echo '.'
--=====================_3585364==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="isdn-down"
#! /bin/sh
--=====================_3585364==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="isdn-up"
#! /bin/sh
pidnat=`cat /var/run/natd.pid`
kill -HUP $pidnat
sleep 2
kill -HUP $pidnat
sleep 1
/sbin/ipfw -q delete 310
sleep 115
/sbin/ipfw -q add 310 deny udp from any to any 123 out via isp0
--=====================_3585364==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="natd.conf"
use_sockets
port 6668
interface isp0
--=====================_3585364==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="ntp.conf"
server ntp.demon.nl
driftfile /etc/ntp.drift
--=====================_3585364==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="ppp-demon.rc"
#!/bin/sh
echo "killing old isp0 ip number"
ifconfig isp0 delete -link1 down
echo "starting pap"
spppcontrol isp0 myauthproto=pap
echo "initialising login name"
spppcontrol isp0 myauthname=systemname
echo "initialising passwd"
spppcontrol isp0 myauthsecret=password
echo "initialising isp0 device with 0.0.0.0"
ifconfig isp0 your_demon_static_ip_number 194.159.73.222 netmask 0xffffffff mtu 576 link1 up
--=====================_3585364==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="rc.conf"
#!/bin/sh
#
# This is rc.conf - a file full of useful variables that you can set
# to change the default startup behavior of your system.
#
# All arguments must be in double or single quotes.
#
# $Id: rc.conf,v 1.1.2.45 1998/06/27 21:23:17 steve Exp $
##############################################################
### Important initial Boot-time options #####################
##############################################################
swapfile="NO" # Set to name of swapfile if aux swapfile desired.
apm_enable="NO" # Set to YES if you want APM enabled.
pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
##############################################################
### Network configuration sub-section ######################
##############################################################
### Basic network options: ###
hostname="dilis.intranet.intervisors.nl" # Set this!
nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
firewall_enable="YES" # Set to YES to enable firewall functionality
firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
firewall_quiet="YES" # Set to YES to suppress rule display
tcp_extensions="YES" # Allow RFC1323 & RFC1644 extensions (or NO).
network_interfaces="ed0 lo0 isp0"
ifconfig_ed0="inet 192.168.0.100 netmask 255.255.255.0"
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
ifconfig_isp0="inet 0.0.0.0 0.0.0.1 link1 mtu 576"
sppp_interfaces="isp0"
isdn_enable="yes"
isdn_fsdev="/dev/ttyv4"
isdn_flags=""
### Network daemon (miscellaneous) & NFS options: ###
syslogd_enable="YES" # Run syslog daemon (or NO).
syslogd_flags="" # Flags to syslogd (if enabled).
inetd_enable="YES" # Run the network daemon dispatcher (or NO).
inetd_flags="" # Optional flags to inetd.
named_enable="NO" # Run named, the DNS server (or NO).
named_program="/usr/sbin/named" # named program, in case we want bind8 instead.
named_flags="-b /etc/namedb/named.boot" # Flags to named (if enabled).
kerberos_server_enable="NO" # Run a kerberos master server (or NO).
kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on
# a slave kerberos server
kerberos_stash="" # Is the kerberos master key stashed?
rwhod_enable="NO" # Run the rwho daemon (or NO).
amd_enable="NO" # Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
nfs_client_enable="NO" # This host is an NFS client (or NO).
nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
nfs_server_enable="NO" # This host is an NFS server (or NO).
nfs_server_flags="-u -t 4" # Flags to nfsd (if enabled).
mountd_flags="-r" # Flags to mountd (if NFS server enabled).
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server.
rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
portmap_enable="YES" # Run the portmapper service (or NO).
portmap_flags="" # Flags to portmap (if enabled).
rarpd_enable="NO" # Run rarpd (or NO).
rarpd_flags="" # Flags to rarpd.
xtend_enable="NO" # Run the X-10 power controller daemon.
xtend_flags="" # Flags to xtend (if enabled).
### Network Time Services options: ###
timed_enable="NO" # Run the time daemon (or NO).
timed_flags="" # Flags to timed (if enabled).
ntpdate_enable="NO" # Run the ntpdate to sync time (or NO).
ntpdate_program="ntpdate" # path to ntpdate, if you want a different one.
ntpdate_flags="" # Flags to ntpdate (if enabled).
xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO).
xntpd_program="xntpd" # path to xntpd, if you want a different one.
xntpd_flags="-p /var/run/xntpd.pid" # Flags to xntpd (if enabled).
tickadj_enable="NO" # Run tickadj (or NO).
tickadj_flags="-Aq" # Flags to tickadj (if enabled).
# Network Information Services (NIS) options: ###
nis_client_enable="NO" # We're an NIS client (or NO).
nis_client_flags="" # Flags to ypbind (if enabled).
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
nis_ypset_flags="" # Flags to ypset (if enabled).
nis_server_enable="NO" # We're an NIS server (or NO).
nis_server_flags="" # Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
### Network routing options: ###
defaultrouter="-interface isp0" # Set to default gateway (or NO).
static_routes="" # Set to static route list (or leave empty).
gateway_enable="YES" # Set to YES if this host will be a gateway.
router_enable="NO" # Set to YES to enable a routing daemon.
router="routed" # Name of routing daemon to use if enabled.
router_flags="-q" # Flags for routing daemon.
mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
mrouted_flags="" # Flags for multicast routing daemon.
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
ipxrouted_flags="" # Flags for IPX routing daemon.
arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL.
forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
accept_sourceroute="NO" # accept source routed packets to us
natd_enable="YES" # Enable natd if firewall_enable.
natd_interface="isp0" # Public interface to use with natd if natd_enable.
natd_flags="" # Additional flags for natd.
##############################################################
### System console options #################################
##############################################################
keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
keybell="NO" # bell to duration.pitch or normal or visual (or NO).
keychange="NO" # function keys default values (or NO).
cursor="NO" # cursor type {normal|blink|destructive} (or NO).
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
blanktime="300" # blank time (in seconds) or "NO" to turn it off.
saver="NO" # screen saver: blank/daemon/green/snake/star/NO.
moused_enable="NO" # Run the mouse daemon.
moused_type="auto" # See man page for rc.conf(5) for available settings.
moused_port="/dev/cuaa0" # Set to your mouse port.
moused_flags="" # Any additional flags to moused.
##############################################################
### Miscellaneous administrative options ###################
##############################################################
cron_enable="YES" # Run the periodic job daemon.
lpd_enable="NO" # Run the line printer daemon.
lpd_flags="" # Flags to lpd (if enabled).
sendmail_enable="no" # Run the sendmail daemon (or NO).
sendmail_flags="-bd -q30m" # -bd is pretty mandatory.
dumpdev="NO" # Device name to crashdump to (if enabled).
check_quotas="NO" # Check quotas (or NO).
accounting_enable="NO" # Turn on process accounting (or NO).
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
linux_enable="YES" # Linux emulation loaded at startup (or NO).
rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
clear_tmp_enable="NO" # Clear /tmp at startup.
ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" # shared library search paths
##############################################################
### Allow local configuration override at the very end here ##
##############################################################
if [ -f /etc/rc.conf.local ]; then
. /etc/rc.conf.local
fi
--=====================_3585364==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="rc.firewall"
#! /bin/sh
oif="isp0"
/sbin/ipfw -f flush
# allow local traffic over the network
/sbin/ipfw -q add 100 allow all from any to any via lo0
/sbin/ipfw -q add 110 allow all from any to any via ed0
# allow outside connections to the DEVIL's APACHE WEB SERVER
/sbin/ipfw -q add 120 pass tcp from any 80 to 192.168.0.66 in via ${oif}
# Deny traffic from the *unregistered* Networks from the outside
/sbin/ipfw -q add 200 deny all from 192.168.0.0/16 to any in via ${oif}
/sbin/ipfw -q add 210 deny all from 172.16.0.0/12 to any in via ${oif}
/sbin/ipfw -q add 220 deny all from 10.0.0.0/8 to any in via ${oif}
#kill windoze networking dial outs
/sbin/ipfw -q add 300 deny udp from any 137 to any 53 out via ${oif}
#kill XNTPD time uopdater dial outs
/sbin/ipfw -q add 310 deny udp from any to any 123 out via ${oif}
/sbin/ipfw -q add 400 divert natd all from any to any via ${oif}
/sbin/ipfw -q add 500 allow all from any to any out via ${oif}
/sbin/ipfw -q add 510 allow tcp from any to any in via ${oif} established
/sbin/ipfw -q add 520 allow udp from any to any in via ${oif}
/sbin/ipfw -q add 700 allow log tcp from 194.159.73.0/24 to any 25 in via ${oif}
/sbin/ipfw -q add 710 allow tcp from any 20 to any 1023- in via ${oif}
/sbin/ipfw -q add 800 allow icmp from any to any in via ${oif} icmptypes 0,3,11
/sbin/ipfw -q add 900 reset log tcp from any to any 113 in via ${oif}
/sbin/ipfw -q add 6000 deny log all from any to any
--=====================_3585364==_
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: attachment; filename="godemon.rc"
#! /bin/sh
pidnat=`cat /var/run/natd.pid`
pid=`cat /var/run/isdnd.pid`
echo "Killing old isdnd"
kill $pid
sleep 3
kill $pid
sleep 3
echo "Starting new isdnd"
isdnd -c /etc/isdn/isdnd-demon.rc -f -r /dev/ttyv4
sleep 3
./ppp-demon.rc
echo "Updating natd"
sleep 3
kill -HUP $pidnat
sleep 3
kill -HUP $pidnat
sleep 3
echo "Updating gateway"
route delete default
sleep 3
route add default -interface isp0
echo "This ship can sail again! (I hope)"
--=====================_3585364==_--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.2.19991204153035.00ae6190>