From owner-freebsd-drivers@FreeBSD.ORG Mon Oct 7 20:23:11 2013 Return-Path: Delivered-To: freebsd-drivers@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:1900:2254:206a::19:1]) (using TLSv1 with cipher ADH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTP id 2DD33CF for ; Mon, 7 Oct 2013 20:23:11 +0000 (UTC) (envelope-from tzoi516@gmail.com) Received: from mail-pb0-x235.google.com (mail-pb0-x235.google.com [IPv6:2607:f8b0:400e:c01::235]) (using TLSv1 with cipher ECDHE-RSA-RC4-SHA (128/128 bits)) (No client certificate requested) by mx1.freebsd.org (Postfix) with ESMTPS id 01F8D2021 for ; Mon, 7 Oct 2013 20:23:10 +0000 (UTC) Received: by mail-pb0-f53.google.com with SMTP id up15so7603612pbc.12 for ; Mon, 07 Oct 2013 13:23:10 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=message-id:date:from:user-agent:mime-version:to:cc:subject :references:in-reply-to:content-type; bh=H+yhLNVl3UfF+mgM+AAKn5MC1BlrUjtaTuZq1RW97qA=; b=lpDui8PIpi1AX13f9PIn7qwVC4nZemtXOtjak17WoDDFKlTAErWqFOJNz7odUD/mfw d4rPClczq2jRN2kP2JSYOrlNTJDNQHWckk3p8pfBYA76/6QtVVEOKhM938FoeHB5+PD1 5rI9ZO5OBzNZu9+NPpJx4FFPPbkgFC9rY2yCgAlWhXoOWk5wpbAE3/xw/uReegGDbAsH wFi+AHDYTFlSTdHvaLRbumnAjSpli23jftXEOhybZdRdoAN4Eos1taIPrPr+qvXkW7Ue uDpGo5Z+ZZxK6xKi9X9HdrPLdHBrV1U2cEmFzQa7iXtFeug905dG0vjZCGNy+cHiPc2L mFBg== X-Received: by 10.68.211.233 with SMTP id nf9mr33105991pbc.85.1381177390559; Mon, 07 Oct 2013 13:23:10 -0700 (PDT) Received: from [10.0.1.23] (c-69-255-180-104.hsd1.va.comcast.net. [69.255.180.104]) by mx.google.com with ESMTPSA id qw8sm35205662pbb.27.1969.12.31.16.00.00 (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Mon, 07 Oct 2013 13:23:09 -0700 (PDT) Message-ID: <52531820.5030607@gmail.com> Date: Mon, 07 Oct 2013 16:22:56 -0400 From: Michael Henze User-Agent: Mozilla/5.0 (X11; FreeBSD i386; rv:17.0) Gecko/17.0 Thunderbird/17.0 MIME-Version: 1.0 To: Jim Bryant Subject: Re: Latitude E6400 Drivers References: <5251A405.1010304@gmail.com> <5252EB4D.1030604@gmail.com> <5252F11E.8020404@gmail.com> <5253162A.80505@gmail.com> <5253170E.2000309@gmail.com> In-Reply-To: <5253170E.2000309@gmail.com> X-Enigmail-Version: 1.4.6 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.14 Cc: freebsd-drivers@freebsd.org X-BeenThere: freebsd-drivers@freebsd.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: Writing device drivers for FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 07 Oct 2013 20:23:11 -0000 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Not a problem, I'll reply tomorrow morning with everything is shows. On 10/07/13 16:18, Jim Bryant wrote: > I would be seriously interested in the conf file you come up with, as I have a dead E6400 that I will be able to afford the parts for in the next month, I'm thinking that it just needs a new motherboard. > > Jim Bryant wrote: >> It doesn't appear to. >> >> 3:12:24pm argus(2): pciconf -lv >> hostb0@pci0:0:0:0: class=0x060000 card=0x02631028 chip=0x2a408086 rev=0x07 hdr=0x00 >> vendor = 'Intel Corporation' >> device = 'Mobile 4 Series Chipset Memory Controller Hub' >> class = bridge >> subclass = HOST-PCI >> vgapci0@pci0:0:2:0: class=0x030000 card=0x02631028 chip=0x2a428086 rev=0x07 hdr=0x00 >> vendor = 'Intel Corporation' >> device = 'Mobile 4 Series Chipset Integrated Graphics Controller' >> class = display >> subclass = VGA >> vgapci1@pci0:0:2:1: class=0x038000 card=0x02631028 chip=0x2a438086 rev=0x07 hdr=0x00 >> vendor = 'Intel Corporation' >> device = 'Mobile 4 Series Chipset Integrated Graphics Controller' >> class = display >> uhci0@pci0:0:26:0: class=0x0c0300 card=0x02631028 chip=0x29378086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) USB UHCI Controller' >> class = serial bus >> subclass = USB >> uhci1@pci0:0:26:1: class=0x0c0300 card=0x02631028 chip=0x29388086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) USB UHCI Controller' >> class = serial bus >> subclass = USB >> uhci2@pci0:0:26:2: class=0x0c0300 card=0x02631028 chip=0x29398086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) USB UHCI Controller' >> class = serial bus >> subclass = USB >> ehci0@pci0:0:26:7: class=0x0c0320 card=0x02631028 chip=0x293c8086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) USB2 EHCI Controller' >> class = serial bus >> subclass = USB >> hdac0@pci0:0:27:0: class=0x040300 card=0x02631028 chip=0x293e8086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) HD Audio Controller' >> class = multimedia >> subclass = HDA >> pcib1@pci0:0:28:0: class=0x060400 card=0x02631028 chip=0x29408086 rev=0x02 hdr=0x01 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) PCI Express Port 1' >> class = bridge >> subclass = PCI-PCI >> pcib2@pci0:0:28:1: class=0x060400 card=0x02631028 chip=0x29428086 rev=0x02 hdr=0x01 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) PCI Express Port 2' >> class = bridge >> subclass = PCI-PCI >> pcib3@pci0:0:28:4: class=0x060400 card=0x02631028 chip=0x29488086 rev=0x02 hdr=0x01 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) PCI Express Port 5' >> class = bridge >> subclass = PCI-PCI >> uhci3@pci0:0:29:0: class=0x0c0300 card=0x02631028 chip=0x29348086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) USB UHCI Controller' >> class = serial bus >> subclass = USB >> uhci4@pci0:0:29:1: class=0x0c0300 card=0x02631028 chip=0x29358086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) USB UHCI Controller' >> class = serial bus >> subclass = USB >> uhci5@pci0:0:29:2: class=0x0c0300 card=0x02631028 chip=0x29368086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) USB UHCI Controller' >> class = serial bus >> subclass = USB >> ehci1@pci0:0:29:7: class=0x0c0320 card=0x02631028 chip=0x293a8086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) USB2 EHCI Controller' >> class = serial bus >> subclass = USB >> pcib4@pci0:0:30:0: class=0x060401 card=0x02631028 chip=0x24488086 rev=0x92 hdr=0x01 >> vendor = 'Intel Corporation' >> device = '82801 Mobile PCI Bridge' >> class = bridge >> subclass = PCI-PCI >> isab0@pci0:0:31:0: class=0x060100 card=0x02631028 chip=0x29198086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = 'ICH9M LPC Interface Controller' >> class = bridge >> subclass = PCI-ISA >> ahci0@pci0:0:31:2: class=0x010601 card=0x02631028 chip=0x29298086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = 'ICH9M/M-E SATA AHCI Controller' >> class = mass storage >> subclass = SATA >> ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x02631028 chip=0x29308086 rev=0x02 hdr=0x00 >> vendor = 'Intel Corporation' >> device = '82801I (ICH9 Family) SMBus Controller' >> class = serial bus >> subclass = SMBus >> iwn0@pci0:12:0:0: class=0x028000 card=0x13218086 chip=0x42328086 rev=0x00 hdr=0x00 >> vendor = 'Intel Corporation' >> device = 'WiFi Link 5100' >> class = network >> bge0@pci0:9:0:0: class=0x020000 card=0x02631028 chip=0x167414e4 rev=0x00 hdr=0x00 >> vendor = 'Broadcom Corporation' >> device = 'NetXtreme BCM5756ME Gigabit Ethernet PCI Express' >> class = network >> subclass = ethernet >> cbb0@pci0:2:1:0: class=0x060700 card=0x02631028 chip=0x04761180 rev=0xba hdr=0x02 >> vendor = 'Ricoh Co Ltd' >> device = 'RL5c476 II' >> class = bridge >> subclass = PCI-CardBus >> fwohci0@pci0:2:1:1: class=0x0c0010 card=0x02631028 chip=0x08321180 rev=0x04 hdr=0x00 >> vendor = 'Ricoh Co Ltd' >> device = 'R5C832 IEEE 1394 Controller' >> class = serial bus >> subclass = FireWire >> sdhci0@pci0:2:1:2: class=0x080501 card=0x02631028 chip=0x08221180 rev=0x21 hdr=0x00 >> vendor = 'Ricoh Co Ltd' >> device = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' >> class = base peripheral >> subclass = SD host controller >> none0@pci0:2:1:3: class=0x088000 card=0x02631028 chip=0x08431180 rev=0x11 hdr=0x00 >> vendor = 'Ricoh Co Ltd' >> device = 'R5C843 MMC Host Controller' >> class = base peripheral >> >> >> tzoi516 wrote: > Great, thanks. Does pciconf show you having the MEI controller? Is if > it does, is it none or did you use something else? > > On 10/07/13 13:11, Jim Bryant wrote: > > >>>> I'm running on an E5500, and it isn't too different. > >>>> > >>>> here's an example of my dmesg. > >>>> > >>>> Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, > >>>> 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of > >>>> the University of California. All rights reserved. FreeBSD is a > >>>> registered trademark of The FreeBSD Foundation. FreeBSD > >>>> 9.2-PRERELEASE #0 r255757: Sat Sep 21 06:32:15 CDT 2013 > >>>> > >>>> jbryant@argus.electron-tube.net:/usr/obj/usr/src/sys/LATITUDE-E5500-GM45 > >>>> > >>>> > >>>> > amd64 > > >>>> gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R) > >>>> Core(TM)2 Duo CPU P8400 @ 2.26GHz (2261.04-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 Stepping = 6 > >>>> > >>>> Features=0xbfebfbff > >>>> > >>>> > >>>> > >>>> Features2=0x8e3fd > >>>> > >>>> AMD Features=0x20100800 AMD Features2=0x1 TSC: P-state invariant, performance statistics real memory = > >>>> 4294967296 (4096 MB) avail memory = 4054933504 (3867 MB) Event > >>>> timer "LAPIC" quality 400 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 > >>>> package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: > >>>> 1 ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on > >>>> motherboard wlan: mac acl policy registered kbd1 at kbdmux0 smbios0: at iomem 0xf6c20-0xf6c3e on > >>>> motherboard smbios0: Version: 2.4, BCD Revision: 2.4 cryptosoft0: > >>>> on motherboard acpi0: on > >>>> motherboard ACPI Warning: Incorrect checksum in table [TCPA] - > >>>> 0xC4, should be 0x68 (20110527/tbutils-282) hpet0: >>>> Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter > >>>> "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" > >>>> frequency 14318180 Hz quality 450 Event timer "HPET1" frequency > >>>> 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz > >>>> quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 acpi0: reservation of 0, 9f000 (3) failed acpi0: reservation of > >>>> e0000, 20000 (3) failed acpi0: reservation of 100000, dd28d400 (3) > >>>> failed cpu0: on acpi0 cpu1: on acpi0 atrtc0: > >>>> port 0x70-0x71,0x72-0x77 irq 8 on acpi0 Event > >>>> timer "RTC" frequency 32768 Hz quality 0 attimer0: port > >>>> 0x40-0x43,0x50-0x53 irq 2 on acpi0 Timecounter "i8254" frequency > >>>> 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz > >>>> quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality > >>>> 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b > >>>> on acpi0 acpi_ec0: port 0x930,0x934 > >>>> on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: > >>>> port 0xefe8-0xefef mem 0xf6c00000-0xf6ffffff,0xe0000000-0xefffffff > >>>> irq 16 at device 2.0 on pci0 acpi_video0: on > >>>> vgapci0 agp0: on vgapci0 agp0: > >>>> aperture size is 256M, detected 32764k stolen memory vgapci1: > >>>> mem 0xf6b00000-0xf6bfffff at device 2.1 on > >>>> pci0 acpi_video1: on vgapci1 ACPI Warning: > >>>> For \134_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) > >>>> (20110527/nspredef-500) evaluation of \134_SB_.PCI0.VID2._DOD makes > >>>> no sense uhci0: port > >>>> 0x6f60-0x6f7f irq 20 at device 26.0 on pci0 usbus0 on uhci0 uhci1: > >>>> port 0x6f80-0x6f9f irq 21 at device 26.1 on pci0 usbus1 on uhci1 uhci2: >>>> controller> port 0x6fa0-0x6fbf irq 22 at device 26.2 on pci0 usbus2 > >>>> on uhci2 ehci0: mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0 usbus3: EHCI > >>>> version 1.0 usbus3 on ehci0 hdac0: > >>>> mem 0xf6afc000-0xf6afffff irq 21 at device 27.0 on pci0 pcib1: > >>>> at device 28.0 on pci0 pci11: > >>>> on pcib1 pcib2: at device 28.1 on pci0 pci12: > >>>> on pcib2 iwn0: mem > >>>> 0xf69fe000-0xf69fffff irq 17 at device 0.0 on pci12 pcib3: >>>> PCI-PCI bridge> at device 28.4 on pci0 pci9: on > >>>> pcib3 bge0: >>>> rev. 0x00a200> mem 0xf68f0000-0xf68fffff irq 16 at device 0.0 on > >>>> pci9 bge0: CHIP ID 0x0000a200; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E miibus0: on bge0 brgphy0: >>>> interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, > >>>> 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, > >>>> 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet > >>>> address: nn:nn:nn:nn:nn:nn uhci3: >>>> controller> port 0x6f00-0x6f1f irq 20 at device 29.0 on pci0 usbus4 > >>>> on uhci3 uhci4: port > >>>> 0x6f20-0x6f3f irq 21 at device 29.1 on pci0 usbus5 on uhci4 uhci5: > >>>> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0 usbus6 on uhci5 ehci1: >>>> 2.0 controller> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on > >>>> pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib4: >>>> bridge> at device 30.0 on pci0 pci2: on pcib4 cbb0: > >>>> irq 19 at device 1.0 on pci2 cardbus0: > >>>> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: > >>>> <1394 Open Host Controller Interface> mem 0xf67ff800-0xf67fffff irq > >>>> 17 at device 1.1 on pci2 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 > >>>> 38:4f:c0:00:1f:32:1d:e1 fwohci0: Phy 1394a available S400, 1 > >>>> ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: > >>>> on fwohci0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: > >>>> node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode sdhci0: >>>> R5C822 SD> mem 0xf67ff600-0xf67ff6ff irq 18 at device 1.2 on pci2 sdhci0: 1 slot(s) allocated pci2: at device 1.3 > >>>> (no driver attached) isab0: at device 31.0 on > >>>> pci0 isa0: on isab0 ahci0: >>>> controller> port 0x6e70-0x6e77,0x6e78-0x6e7b,0x6e80-0x6e87,0x6e88-0x6e8b,0x6ea0-0x6ebf > >>>> > >>>> > >>>> > mem 0xfed1c800-0xfed1cfff irq 19 at device 31.2 on pci0 > > >>>> ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not > >>>> supported ahcich0: at channel 0 on ahci0 ahcich1: > >>>> at channel 1 on ahci0 ahcich4: at > >>>> channel 4 on ahci0 ahcich5: at channel 5 on ahci0 ichsmb0: port 0x1100-0x111f > >>>> mem 0xf6afbf00-0xf6afbfff irq 19 at device 31.3 on pci0 smbus0: > >>>> on ichsmb0 smb0: on > >>>> smbus0 acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: > >>>> on acpi0 acpi_acad0: on acpi0 battery0: >>>> Method Battery> on acpi0 acpi_tz0: on acpi0 atkbdc0: > >>>> port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: > >>>> [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 > >>>> flags 0x10 on acpi0 tpm0: port > >>>> 0xcb0-0xcbb iomem 0xfed40000-0xfed44fff on acpi0 tpm: Broadcom > >>>> BCM0102 rev 0x20 ichwd0 on isa0 orm0: at iomem > >>>> 0xc0000-0xcffff on isa0 sc0: at flags 0x100 on > >>>> isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: >>>> VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0: >>>> channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1: >>>> channel> at port 0x170-0x177,0x376 irq 15 on isa0 coretemp0: >>>> On-Die Thermal Sensors> on cpu0 est0: >>>> Control> on cpu0 p4tcc0: on cpu0 coretemp1: on cpu1 est1: >>>> SpeedStep Frequency Control> on cpu1 p4tcc1: >>>> Control> on cpu1 SGI XFS with large block numbers, tracing, no > >>>> debug enabled Timecounters tick every 1.000 msec bge0f0: Ethernet > >>>> address: nn:nn:nn:nn:nn:nn bge0f1: Ethernet address: > >>>> nn:nn:nn:nn:nn:nn bge0f2: Ethernet address: nn:nn:nn:nn:nn:nn bge0f3: Ethernet address: nn:nn:nn:nn:nn:nn IPsec: Initialized > >>>> Security Association Processing. ncp_load: loaded ipfw2 (+ipv6) > >>>> initialized, divert enabled, nat enabled, default to accept, > >>>> logging disabled DUMMYNET 0 with IPv6 initialized (100409) firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: > >>>> bus manager 0 load_dn_sched dn_sched FIFO loaded load_dn_sched > >>>> dn_sched PRIO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ > >>>> loaded hdacc0: at cad 0 on hdac0 hdaa0: > >>>> at nid 1 on hdacc0 pcm0: >>>> 92HD71B7 (Analog 2.0+HP/2.0)> at nid 13,10 and 11,14 on hdaa0 pcm1: > >>>> at nid 15 on hdaa0 pcm2: > >>>> at nid 30 on hdaa0 hdacc1: >>>> Cantiga HDA CODEC> at cad 2 on hdac0 hdaa1: >>>> Function Group> at nid 1 on hdacc1 pcm3: > >>>> at nid 3 on hdaa1 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps > >>>> Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: > >>>> 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB > >>>> v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: at > >>>> usbus0 uhub0: >>>> 1> on usbus0 ugen1.1: at usbus1 uhub1: >>>> HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: > >>>> at usbus2 uhub2: >>>> addr 1> on usbus2 ugen3.1: at usbus3 uhub3: >>>> root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: > >>>> at usbus4 uhub4: >>>> 1.00/1.00, addr 1> on usbus4 ugen5.1: at usbus5 uhub5: > >>>> on usbus5 ugen6.1: at usbus6 uhub6: >>>> rev 1.00/1.00, addr 1> on usbus6 ugen7.1: at usbus7 uhub7: > >>>> on usbus7 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: >>>> WD5000BEVT-00A0RT0 01.01A01> ATA-8 SATA 2.x device ada0: > >>>> 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: > >>>> Command Queueing enabled ada0: 476940MB (976773168 512 byte > >>>> sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: > >>>> AP CPU #1 Launched! hwpmc: SOFT/16/64/0x67 > >>>> TSC/1/64/0x20 IAP/2/40/0x3ff IAF/3/40/0x67 cd0 at ahcich1 bus 0 scbus1 > >>>> target 0 lun 0 cd0: Removable > >>>> CD-ROM SCSI-0 device cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, > >>>> ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size > >>>> failed: NOT READY, Medium not present uhub0: 2 ports with 2 > >>>> removable, self powered uhub1: 2 ports with 2 removable, self > >>>> powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 > >>>> ports with 2 removable, self powered uhub5: 2 ports with 2 > >>>> removable, self powered uhub6: 2 ports with 2 removable, self > >>>> powered Root mount waiting for: usbus7 usbus3 Root mount waiting > >>>> for: usbus7 usbus3 uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered Root mount waiting > >>>> for: usbus7 usbus3 Root mount waiting for: usbus7 ugen2.2: >>>> 0x08ff> at usbus2 Root mount waiting for: usbus7 Root mount waiting > >>>> for: usbus7 Root mount waiting for: usbus7 ugen7.2: at > >>>> usbus7 umass0: on usbus7 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 > >>>> 00 00 10 00 00 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status > >>>> Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 > >>>> (Invalid command operation code) (probe0:umass-sim0:0:0:0): Error > >>>> 22, Unretryable error da0 at umass-sim0 bus 0 scbus6 target 0 lun > >>>> 0 da0: Fixed Direct Access SCSI-5 device da0: 40.000MB/s transfers da0: 2861588MB (5860533168 512 byte > >>>> sectors: 255H 63S/T 364801C) da0: quirks=0xa Root > >>>> mount waiting for: usbus7 ugen7.3: at usbus7 umass1: >>>> Bulk-Only Transport> on usbus7 (probe0:umass-sim1:1:0:0): REPORT > >>>> LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI status: Check Condition (probe0:umass-sim1:1:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 > >>>> (Invalid command operation code) (probe0:umass-sim1:1:0:0): Error > >>>> 22, Unretryable error da1 at umass-sim1 bus 1 scbus7 target 0 lun > >>>> 0 da1: Fixed Direct Access SCSI-6 > >>>> device da1: 40.000MB/s transfers da1: 2861588MB (5860533168 512 > >>>> byte sectors: 255H 63S/T 364801C) da1: quirks=0xa da2 > >>>> at umass-sim1 bus 1 scbus7 target 0 lun 1 da2: >>>> EZRX-00MMMB0 0X06> Fixed Direct Access SCSI-6 device da2: > >>>> 40.000MB/s transfers da2: 2861588MB (5860533168 512 byte sectors: > >>>> 255H 63S/T 364801C) da2: quirks=0xa Root mount > >>>> waiting for: usbus7 ugen7.4: at usbus7 uhub8: > >>>> on usbus7 ugen5.2: at usbus5 ums0: >>>> class 0/0, rev 2.00/57.01, addr 2> on usbus5 ums0: 16 buttons and > >>>> [XYZT] coordinates ID=0 Root mount waiting for: usbus7 uhid0: > >>>> on > >>>> usbus5 uhub8: 4 ports with 3 removable, self powered Root mount > >>>> waiting for: usbus7 ugen7.5: at usbus7 umass2: on usbus7 da3 at umass-sim2 bus 2 > >>>> scbus8 target 0 lun 0 da3: Fixed Direct > >>>> Access SCSI-2 device da3: 40.000MB/s transfers da3: 1907729MB > >>>> (3907029168 512 byte sectors: 255H 63S/T 243201C) da3: > >>>> quirks=0x2 ugen7.6: at usbus7 uhub9: > >>>> on usbus7 uhub9: 4 ports with 4 removable, self powered ugen7.7: > >>>> at usbus7 ukbd0: >>>> class 0/0, rev 1.10/1.50, addr 7> on usbus7 kbd2 at ukbd0 uhid1: > >>>> on usbus7 Trying to mount root from ufs:/dev/ada0s4a [rw]... interface oldnfs.1 already present in the KLD 'kernel'! linker_load_file: Unsupported file type nfsd: can't register svc > >>>> name fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 g_dev_taste: > >>>> make_dev_p() failed (gp->name=md0s4, error=17) drm0: >>>> Intel\M-B\M-. GM45 Express Chipset> on vgapci0 info: [drm] MSI > >>>> enabled 1 message(s) info: [drm] AGP at 0xe0000000 256MB info: > >>>> [drm] Initialized i915 1.6.0 20080730 ugen7.8: >>>> Electronics> at usbus7 umass3: on usbus7 da4 at > >>>> umass-sim3 bus 3 scbus9 target 0 lun 0 da4: >>>> 0001> Removable Direct Access SCSI-2 device da4: 40.000MB/s > >>>> transfers da4: Attempt to query device size failed: NOT READY, > >>>> Medium not present da4: quirks=0x2 da5 at umass-sim3 bus > >>>> 3 scbus9 target 0 lun 1 da5: Removable > >>>> Direct Access SCSI-2 device da5: 40.000MB/s transfers da5: Attempt > >>>> to query device size failed: NOT READY, Medium not present da5: > >>>> quirks=0x2 > >>>> > >>>> tzoi516 wrote: Hi, > >>>> > >>>> I'm able to find solutions to most drivers, but I'm having trouble determining what to load for these: > >>>> > >>>> none0@pci0:0:3:0: class=0x078000 card=0x02331028 > >>>> chip=0x2a448086 rev=0x07 hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile 4 Series Chipset MEI Controller' class = > >>>> simple comms bar [10] = type Memory, range 64, base 0xf6fd9ef0, > >>>> size 16, enabled cap 01[50] = powerspec 3 supports D0 D3 current > >>>> D0 cap 05[8c] = MSI supports 1 message, 64 bit > >>>> > >>>> none1@pci0:0:3:3: class=0x070002 card=0x02331028 > >>>> chip=0x2a478086 rev=0x07 hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile 4 Series Chipset AMT SOL Redirection' class > >>>> = simple comms subclass = UART bar [10] = type I/O Port, range > >>>> 32, base 0xef88, size 8, enabled bar [14] = type Memory, range > >>>> 32, base 0xf6fda000, size 4096, enabled cap 01[c8] = powerspec 3 > >>>> supports D0 D3 current D0 cap 05[d0] = MSI supports 1 message, 64 > >>>> bit > >>>> > >>>> none2@pci0:0:31:3: class=0x0c0500 card=0x02331028 > >>>> chip=0x29308086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801I (ICH9 Family) SMBus Controller' class = > >>>> serial bus subclass = SMBus bar [10] = type Memory, range 64, > >>>> base 0xf6fd9f00, size 256, enabled bar [20] = type I/O Port, > >>>> range 32, base 0x1100, size 32, enabled > >>>> > >>>> > >>>> none3@pci0:3:1:1: class=0x080501 card=0x02331028 > >>>> chip=0x08221180 rev=0x21 hdr=0x00 vendor = 'Ricoh Co Ltd' device = 'R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter' class > >>>> = base peripheral subclass = SD host controller bar [10] = type > >>>> Memory, range 32, base 0xf1bff600, size 256, enabled cap 01[80] = > >>>> powerspec 2 supports D0 D1 D2 D3 current D0 > >>>> > >>>> none4@pci0:3:1:2: class=0x088000 card=0x02331028 > >>>> chip=0x08431180 rev=0x11 hdr=0x00 vendor = 'Ricoh Co Ltd' device = 'R5C843 MMC Host Controller' class = base > >>>> peripheral bar [10] = type Memory, range 32, base 0xf1bff700, > >>>> size 256, enabled cap 01[80] = powerspec 2 supports D0 D1 D2 D3 > >>>> current D0 > >>>> > >>>> I know people are busy, but any links or references to help find drivers or modules would be appreciated. I've used man and PCI > >>>> driver sites to help narrow down, but nothing helped. mmc and mmcsd > >>>> modules don't work with the Ricoh devices, per pciconf. Thanks. > >>>> > >>>> > >>>>> _______________________________________________ freebsd-drivers@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-drivers To > >>>>> unsubscribe, send any mail to "freebsd-drivers-unsubscribe@freebsd.org" . > >>>>> > >>>>> > >>>>> >>> >>> >> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.20 (FreeBSD) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iQEcBAEBAgAGBQJSUxggAAoJEHwOQECmtTOIQsMH/jUqCUbTZNz6BpSS4a1T5jyJ e505KRZTJxaOiXF84llTBDK0DqLyREOxikFd9wZX1PDv2BCvYB6/ldw4RsXYX9Fy 6WzYDwMzUVjFZdMSuIlA2j+wzA04QyHrqQlX0fUgs0FBRTjFpCeztjlApViivdL7 +9Vjf3mGRgO7JMVVh1QnRfCWXvx69tPHvojJeZBrFFJSiFoTEUtwBooOgDmfb+K4 rX9ziyzJqEhJHylI2lDi6TSb4dYCPPWqZ/OKnyMnAV3h7OEqeJ7b3imQcTT7BSYn SjVKVWqp2wCz5LTODz2JYPvTcJCtKQDnVzEiY70FHVIA22LnyFraSMvEPTziCjc= =pda3 -----END PGP SIGNATURE-----