Date: Tue, 24 Jul 2007 14:21:33 +0200 From: Bernd Walter <ticso@cicely12.cicely.de> To: =?iso-8859-1?Q?Bj=F6rn_K=F6nig?= <bkoenig@alpha-tierchen.de> Cc: PowerMan <powerman1st@gmail.com>, freebsd-arm@freebsd.org Subject: Re: A question about FreeBSD-ARM Message-ID: <20070724122132.GG564@cicely12.cicely.de> In-Reply-To: <50987.2001:6f8:101e:0:20e:cff:fe6d:6adb.1185275790.squirrel@webmail.alpha-tierchen.de> References: <76c271ae0707240136q9d61e10wfc16ff52958b35b9@mail.gmail.com> <50987.2001:6f8:101e:0:20e:cff:fe6d:6adb.1185275790.squirrel@webmail.alpha-tierchen.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jul 24, 2007 at 01:16:30PM +0200, Björn König wrote: > Hello, > > > I have visited http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/arm/ > > and kownn that AT91xx is now supportted by FreeBSD. AT91RM9200 to be exact. The AT91SAM92xx family requires a a bit of work in the driver area befor they will run. > > But which board does it run on? Almost all baords should run with minor modification to the source. Each board has different xtals, pin configuration, etc to consider, so a bit of cutomization is required to get a new board running. > > Could you give me a link to the web page which introduces the AT91xx > > board supportted by FreeBSD? > > There are several manufacturers out there that offer boards with AT91 > controller, e.g. > http://www.kwikbyte.com/KB9202.html > > I use this one: > http://taskit.de/en/products/portux/index.htm Not to forget our board :) http://www.small-control.de/FSB-A920-1.html http://www.small-control.de/FSB-A920-1-APG.html In case you search for it: the SD-header is on the bottom side. It has not much to do with the result, but the board was even layouted using FreeBSD. -- B.Walter http://www.bwct.de http://www.fizon.de bernd@bwct.de info@bwct.de support@fizon.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070724122132.GG564>