Date: Sun, 20 Aug 2006 22:11:47 +0100 From: "Martin Hepworth" <maxsec@gmail.com> To: "Jason Lixfeld" <jason+lists.freebsd-questions@lixfeld.ca> Cc: freebsd-questions@freebsd.org Subject: Re: Two Dell PE1850s keep locking up... Message-ID: <72cf361e0608201411h5be8bd2bsbf2f9187e3e226dd@mail.gmail.com> In-Reply-To: <FE80872B-AA83-4104-B4B6-3EE3DFB8250E@lixfeld.ca> References: <FE80872B-AA83-4104-B4B6-3EE3DFB8250E@lixfeld.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Can you do anything else that hits the machine with high disk I/O? If this an SMP enabled kernel? If so does the same thing occur if you use a non-smp enabled kernel? -- Martin On 8/19/06, Jason Lixfeld <jason+lists.freebsd-questions@lixfeld.ca> wrote: > > (Please forgive the verbosity of this note) > > I have two identically configured Dell PowerEdge 1850 servers running > FreeBSD 6.1-R-p3. Both of these machines seem to lock up under > whatever load conditions are are present during compiling > applications. The most recent lockup on one machine was while > compiling a kernel, the other was while running portupgrade. Not > sure what the straw is that breaks the back here, so I'm wondering if > anyone has seen anything like this before and can perhaps shed some > light on what might be happening, or perhaps give me some clues on > how I can go about debugging/troubleshooting this. > > I've included a some output which will hopefully give a clear picture > of how these guys are configured. > > While I appreciate everyone's input, please save yourself the trouble > if your canned response would normally be something to the effect of > telling me that Dell suck and I should use HP or IBM if I want to run > FreeBSD. > > Thanks in advance! > > pciconf -lv: > > hostb0@pci0:0:0: class=0x060000 card=0x016c1028 > chip=0x35908086 rev=0x09 hdr=0x00 > vendor = 'Intel Corporation' > device = 'E752x Server Memory Controller Hub' > class = bridge > subclass = HOST-PCI > pcib1@pci0:2:0: class=0x060400 card=0x00000050 chip=0x35958086 > rev=0x09 hdr=0x01 > vendor = 'Intel Corporation' > device = 'E752x Memory Controller Hub PCI Express Port A0' > class = bridge > subclass = PCI-PCI > pcib4@pci0:4:0: class=0x060400 card=0x00000050 chip=0x35978086 > rev=0x09 hdr=0x01 > vendor = 'Intel Corporation' > device = 'E752x Memory Controller Hub PCI Express Port B0' > class = bridge > subclass = PCI-PCI > pcib5@pci0:5:0: class=0x060400 card=0x00000050 chip=0x35988086 > rev=0x09 hdr=0x01 > vendor = 'Intel Corporation' > device = 'E752x Memory Controller Hub PCI Express Port B1' > class = bridge > subclass = PCI-PCI > pcib8@pci0:6:0: class=0x060400 card=0x00000050 chip=0x35998086 > rev=0x09 hdr=0x01 > vendor = 'Intel Corporation' > device = 'E752x Memory Controller Hub PCI Express Port C0' > class = bridge > subclass = PCI-PCI > uhci0@pci0:29:0: class=0x0c0300 card=0x016c1028 > chip=0x24d28086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller' > class = serial bus > subclass = USB > uhci1@pci0:29:1: class=0x0c0300 card=0x016c1028 > chip=0x24d48086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller' > class = serial bus > subclass = USB > uhci2@pci0:29:2: class=0x0c0300 card=0x016c1028 > chip=0x24d78086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller' > class = serial bus > subclass = USB > ehci0@pci0:29:7: class=0x0c0320 card=0x016c1028 > chip=0x24dd8086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller' > class = serial bus > subclass = USB > pcib9@pci0:30:0: class=0x060400 card=0x00000000 > chip=0x244e8086 rev=0xc2 hdr=0x01 > vendor = 'Intel Corporation' > device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), > 6300ESB Hub Interface to PCI Bridge' > class = bridge > subclass = PCI-PCI > isab0@pci0:31:0: class=0x060100 card=0x00000000 > chip=0x24d08086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge' > class = bridge > subclass = PCI-ISA > atapci0@pci0:31:1: class=0x01018a card=0x016c1028 > chip=0x24db8086 rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801EB/ER (ICH5/ICH5R) EIDE Controller' > class = mass storage > subclass = ATA > pcib2@pci1:0:0: class=0x060400 card=0x00000044 chip=0x03308086 > rev=0x06 hdr=0x01 > vendor = 'Intel Corporation' > device = '80332 [Dobson] I/O processor A-segment Bridge' > class = bridge > subclass = PCI-PCI > pcib3@pci1:0:2: class=0x060400 card=0x00000044 chip=0x03328086 > rev=0x06 hdr=0x01 > vendor = 'Intel Corporation' > device = '80332 [Dobson] I/O processor B-segment Bridge' > class = bridge > subclass = PCI-PCI > amr0@pci2:14:0: class=0x010400 card=0x016c1028 chip=0x00131028 > rev=0x06 hdr=0x00 > vendor = 'Dell Computer Corporation' > class = mass storage > subclass = RAID > pcib6@pci5:0:0: class=0x060400 card=0x00000044 chip=0x03298086 > rev=0x09 hdr=0x01 > vendor = 'Intel Corporation' > device = '6700PXH PCI Express-to-PCI Express Bridge A' > class = bridge > subclass = PCI-PCI > pcib7@pci5:0:2: class=0x060400 card=0x00000044 chip=0x032a8086 > rev=0x09 hdr=0x01 > vendor = 'Intel Corporation' > device = '6700PXH PCI Express-to-PCI Express Bridge B' > class = bridge > subclass = PCI-PCI > em0@pci6:7:0: class=0x020000 card=0x016d1028 chip=0x10768086 > rev=0x05 hdr=0x00 > vendor = 'Intel Corporation' > device = '82547EI Gigabit Ethernet Controller' > class = network > subclass = ethernet > em1@pci7:8:0: class=0x020000 card=0x016d1028 chip=0x10768086 > rev=0x05 hdr=0x00 > vendor = 'Intel Corporation' > device = '82547EI Gigabit Ethernet Controller' > class = network > subclass = ethernet > none0@pci9:13:0: class=0x030000 card=0x016c1028 > chip=0x51591002 rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc' > device = 'RV100 Radeon 7000 / Radeon VE' > class = display > subclass = VGA > > dmesg: > > ricky# dmesg > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 6.1-RELEASE-p3 #9: Wed Aug 9 10:07:40 EDT 2006 > root@RICKY.domain.tld:/usr/obj/usr/src/sys/RICKY > ACPI APIC Table: <DELL PE BKC > > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.71-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE > ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR, > Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> > AMD Features=0x20100800<SYSCALL,NX,LM> > Logical CPUs per core: 2 > real memory = 1073479680 (1023 MB) > avail memory = 1028681728 (981 MB) > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 2 > ioapic1: Changing APIC ID to 3 > ioapic1: WARNING: intbase 32 != expected base 24 > ioapic2: Changing APIC ID to 4 > ioapic2: WARNING: intbase 64 != expected base 56 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 32-55 on motherboard > ioapic2 <Version 2.0> irqs 64-87 on motherboard > acpi0: <DELL PE BKC> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 > pci2: <ACPI PCI bus> on pcib2 > amr0: <LSILogic MegaRAID 1.53> mem 0xf80f0000-0xf80fffff, > 0xfe9e0000-0xfe9fffff irq 46 at device 14.0 on pci2 > amr0: Using 64-bit DMA > amr0: delete logical drives supported by controller > amr0: <LSILogic PERC 4e/Si> Firmware 521X, BIOS H430, 256MB RAM > pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5 > pci6: <ACPI PCI bus> on pcib6 > em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port > 0xecc0-0xecff mem 0xfe6e0000-0xfe6fffff irq 64 at devi > em0: Ethernet address: 00:13:72:53:4a:04 > pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5 > pci7: <ACPI PCI bus> on pcib7 > em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port > 0xdcc0-0xdcff mem 0xfe4e0000-0xfe4fffff irq 65 at devi > em1: Ethernet address: 00:13:72:53:4a:05 > pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pci8: <ACPI PCI bus> on pcib8 > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff > irq 16 at device 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf > irq 19 at device 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf > irq 18 at device 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem > 0xfeb00000-0xfeb003ff irq 23 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub3: 6 ports with 6 removable, self powered > uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2 > uhub4: multiple transaction translators > uhub4: 2 ports with 2 removable, self powered > pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci9: <ACPI PCI bus> on pcib9 > pci9: <display, VGA> at device 13.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH5 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 > on acpi0 > sio0: type 16550A, console > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xec000-0xeffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > ucom0: Belkin USB PDA Adapter Belkin Components, rev 1.10/1.02, addr 2 > Timecounters tick every 1.000 msec > acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33 > amr0: delete logical drives supported by controller > amrd0: <LSILogic MegaRAID logical drive> on amr0 > amrd0: 139900MB (286515200 sectors) RAID 1 (optimal) > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/amrd0s2a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > /usr: mount pending error: blocks 16 files 2 > WARNING: /var was not properly dismounted > em0: link state changed to UP > em1: link state changed to UP > > Raid Configuration: > > # megarc -ldInfo -a0 -Lall > > > > ********************************************************************** > MEGARC MegaRAID Configuration Utility(FreeBSD)-1.04 > (03-02-2005) > By LSI Logic Corp.,USA > > ********************************************************************** > [Note: For SATA-2, 4 and 6 channel controllers, please > specify > Ch=0 Id=0..15 for specifying physical drive(Ch=channel, > Id=Target)] > > Type ? as command line arg for help > > > Finding Devices On Each MegaRAID Adapter... > Scanning Ha 0, Chnl 0 Target 15 > > *******Information Of Logical Drive 0******* > > Logical Drive : 0( Adapter: 0 ): Status: OPTIMAL > --------------------------------------------------- > SpanDepth :01 RaidLevel: 1 RdAhead : Adaptive Cache: > DirectIo > StripSz :064KB Stripes : 2 WrPolicy: WriteBack > > Logical Drive 0 : SpanLevel_0 Disks > Chnl Target StartBlock Blocks Physical Target Status > ---- ------ ---------- ------ ---------------------- > 0 00 0x00000000 0x1113e000 ONLINE > 0 01 0x00000000 0x1113e000 ONLINE > > Kernel Config: > > machine amd64 > cpu HAMMER > ident RICKY > options SCHED_ULE # ULE scheduler > options PREEMPTION # Enable kernel thread > preemption > options INET # InterNETworking > options FFS # Berkeley Fast Filesystem > options SOFTUPDATES # Enable FFS soft updates > support > options UFS_ACL # Support for access control > lists > options UFS_DIRHASH # Improve performance on big > directories > options CD9660 # ISO 9660 Filesystem > options COMPAT_43 # Needed by COMPAT_LINUX32 > options COMPAT_IA32 # Compatible with i386 binaries > options COMPAT_FREEBSD4 # Compatible with FreeBSD4 > options COMPAT_FREEBSD5 # Compatible with FreeBSD5 > options COMPAT_LINUX32 # Compatible with i386 linux > binaries > options SCSI_DELAY=5000 # Delay (in ms) before > probing SCSI > options SYSVSHM # SYSV-style shared memory > options SYSVMSG # SYSV-style message queues > options SYSVSEM # SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real- > time extensions > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > options ADAPTIVE_GIANT # Giant mutex is adaptive. > device acpi > device pci > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > options ATA_STATIC_ID # Static device numbering > device scbus # SCSI bus (required for SCSI) > device amr # AMI MegaRAID > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > device psm # PS/2 mouse > device vga # VGA video card driver > device splash # Splash screen and screen saver support > device sc > device sio # 8250, 16[45]50 based serial ports > device em # Intel PRO/1000 adapter Gigabit > Ethernet Card > device loop # Network loopback > device random # Entropy device > device ether # Ethernet support > device pty # Pseudo-ttys (telnet etc) > device bpf # Berkeley packet filter > device uhci # UHCI PCI->USB interface > device ehci # EHCI PCI->USB interface (USB 2.0) > device usb # USB Bus (required) > device ucom > device umct > device ukbd # Keyboard > device ums # Mouse > options SMP # SMP > device mem # lsof > device io # lsof > options IPI_PREEMPTION > device mptable # Optional MPSPEC mptable > support > options DEVICE_POLLING > options HZ=1000 > options ENABLE_ALART > options ACCEPT_FILTER_HTTP # Apache accf_http module > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to " > freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?72cf361e0608201411h5be8bd2bsbf2f9187e3e226dd>