Date: Mon, 15 Dec 2003 11:46:27 +0100 From: "Nasher The Trasher" <nasher2k@hotmail.com> To: aic7xxx@freebsd.org Subject: scsi type: adaptec scsi 29160 Message-ID: <Law9-F25avN3qljWwY000011667@hotmail.com>
next in thread | raw e-mail | index | archive | help
scsi type: adaptec scsi 29160 when i boot my kernel i get an error: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 29160 Ultra160 SCSI adapter> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi0:A:0:0: DV failed to configure device. Please file a bug report against th is driver. (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: IBM Model: DDYS-T18350M Rev: S80D Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) i posted this on a forum (gentoo) and a guy replyed to me and suggest me to email the aic7xxx mailing list i compiled the kernel with ----- DV is the abbreviation for "Domain Validation". you need to compile your scsi driver again (maybe just the module or the kernel, depending how you have configured your kernel) and you need to enable the debugging code and set the debug mask to 2112 decimal. both of the mentioned settings are kernel config options ---- and my output is: ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 2 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio hda: CD-950E/TKU, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: attached ide-cdrom driver. hda: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00 PCI: Found IRQ 9 for device 02:0a.0 Launching DV Thread scsi0: Waking DV thread scsi0: Beginning Domain Validation scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 29160 Ultra160 SCSI adapter> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi0:A:0:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:0:0: Sending INQ scsi0:0:0: Command completed, status= 0x10000 scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 1, status= 0x0, cmd->result= 0x10000 scsi0:2625: Going from state 1 to state 2 scsi0:A:0:0: Sending INQ scsi0:0:0: Command completed, status= 0x10000 scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 2, status= 0x0, cmd->result= 0x10000 scsi0:2625: Going from state 2 to state 3 scsi0:A:0:0: Sending INQ scsi0:0:0: Command completed, status= 0x10000 scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 3, status= 0x0, cmd->result= 0x10000 scsi0:2672: Going from state 3 to state 4 scsi0:A:0:0: Sending TUR scsi0:0:0: Command completed, status= 0x80a0002 scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 4, status= 0x10905, cmd->result= 0x80a0002 scsi0:2818: Going from state 4 to state 4 scsi0:A:0:0: Sen ding TUR scsi0:0:0: Command completed, status= 0x10000 scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 4, status= 0x0, cmd->result= 0x10000 scsi0:2807: Going from state 4 to state 5 scsi0:A:0:0: Sending REBD scsi0:0:0: Command completed, status= 0x10000 scsi0:A:0:0: Entering ahc_linux_dv_transition, state= 5, status= 0x0, cmd->result= 0x10000 scsi0:2867: Going from state 5 to state 7 scsi0:A:0:0: Echo buffer size= 0 scsi0:2877: Going from state 7 to state 0 scsi0:A:0:0: DV failed to configure device. Please file a bug report against this driver. scsi0:A:1:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:1:0: Sending INQ scsi0:0:1: Command completed, status= 0x80000 scsi0:A:1:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:1:0: Failed DV inquiry, skipping scsi0:A:2:0: Performing DV scsi0:2450: Go ing from state 0 to state 1 scsi0:A:2:0: Sending INQ scsi0:0:2: Command completed, status= 0x80000 scsi0:A:2:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:2:0: Failed DV inquiry, skipping scsi0:A:3:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:3:0: Sending INQ scsi0:0:3: Command completed, status= 0x80000 scsi0:A:3:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:3:0: Failed DV inquiry, skipping scsi0:A:4:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:4:0: Sending INQ scsi0:0:4: Command completed, status= 0x80000 scsi0:A:4:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:4:0: Failed DV inquiry, skipping scsi0:A :5:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:5:0: Sending INQ scsi0:0:5: Command completed, status= 0x80000 scsi0:A:5:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:5:0: Failed DV inquiry, skipping scsi0:A:6:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:6:0: Sending INQ scsi0:0:6: Command completed, status= 0x80000 scsi0:A:6:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:6:0: Failed DV inquiry, skipping scsi0:A:8:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:8:0: Sending INQ scsi0:0:8: Command completed, status= 0x80000 scsi0:A:8:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:8:0: F ailed DV inquiry, skipping scsi0:A:9:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:9:0: Sending INQ scsi0:0:9: Command completed, status= 0x80000 scsi0:A:9:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:9:0: Failed DV inquiry, skipping scsi0:A:10:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:10:0: Sending INQ scsi0:0:10: Command completed, status= 0x80000 scsi0:A:10:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:10:0: Failed DV inquiry, skipping scsi0:A:11:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:11:0: Sending INQ scsi0:0:11: Command completed, status= 0x80000 scsi0:A:11:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: G oing from state 1 to state 0 scsi0:A:11:0: Failed DV inquiry, skipping scsi0:A:12:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:12:0: Sending INQ scsi0:0:12: Command completed, status= 0x80000 scsi0:A:12:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:12:0: Failed DV inquiry, skipping scsi0:A:13:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:13:0: Sending INQ scsi0:0:13: Command completed, status= 0x80000 scsi0:A:13:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:13:0: Failed DV inquiry, skipping scsi0:A:14:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:14:0: Sending INQ scsi0:0:14: Command completed, status= 0x80000 scsi0:A:14:0: Entering ahc_linux_dv_transition, state= 1, statu s= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:14:0: Failed DV inquiry, skipping scsi0:A:15:0: Performing DV scsi0:2450: Going from state 0 to state 1 scsi0:A:15:0: Sending INQ scsi0:0:15: Command completed, status= 0x80000 scsi0:A:15:0: Entering ahc_linux_dv_transition, state= 1, status= 0x20005, cmd->result= 0x80000 scsi0:2644: Going from state 1 to state 0 scsi0:A:15:0: Failed DV inquiry, skipping (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: IBM Model: DDYS-T18350M Rev: S80D Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:0:0: Tagged Queuing enabled. Depth 253 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 3 5843670 512-byte hdwr sectors (18352 MB) Partition check: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 _________________________________________________________________ Spel spelletjes met je online vrienden via MSN Messenger [1]klik hier References 1. http://g.msn.com/8HMBNLNL/2743??PS=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Law9-F25avN3qljWwY000011667>