From owner-freebsd-bugs@FreeBSD.ORG Tue Dec 15 23:30:03 2009 Return-Path: Delivered-To: freebsd-bugs@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DBE281065670 for ; Tue, 15 Dec 2009 23:30:02 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id C286B8FC0A for ; Tue, 15 Dec 2009 23:30:02 +0000 (UTC) Received: from freefall.freebsd.org (localhost [127.0.0.1]) by freefall.freebsd.org (8.14.3/8.14.3) with ESMTP id nBFNU2al013766 for ; Tue, 15 Dec 2009 23:30:02 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.3/8.14.3/Submit) id nBFNU2wq013761; Tue, 15 Dec 2009 23:30:02 GMT (envelope-from gnats) Date: Tue, 15 Dec 2009 23:30:02 GMT Message-Id: <200912152330.nBFNU2wq013761@freefall.freebsd.org> To: freebsd-bugs@FreeBSD.org From: Olivier Certner Cc: Subject: Re: kern/141658: Kernel panics when inserting a USB key in a 4Gb laptop running 7.2-STABLE X-BeenThere: freebsd-bugs@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Olivier Certner List-Id: Bug reports List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 15 Dec 2009 23:30:03 -0000 The following reply was made to PR kern/141658; it has been noted by GNATS. From: Olivier Certner To: bug-followup@freebsd.org Cc: Subject: Re: kern/141658: Kernel panics when inserting a USB key in a 4Gb laptop running 7.2-STABLE Date: Wed, 16 Dec 2009 00:06:05 +0100 Seems that I didn't get how attachments are supposed to work in a PR... Anyway, here is the dmesg with the 8.0-RELEASE i386 kernel: Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009 root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc13a7000. Preloaded mfs_root "/boot/mfsroot" at 0xc13a71d8. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2394011472 Hz CPU: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz (2394.01-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x10676 Stepping = 6 Features=0xbfebfbff Features2=0x8e3bd AMD Features=0x20100000 AMD Features2=0x1 TSC: P-state invariant Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 3072 kbytes, 8-way associative, 64 bytes/line real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x00000000dbefbfff, 3668795392 bytes (895702 pages) avail memory = 3667451904 (3497 MB) Table 'FACP' at 0xdfe5d09c Table 'HPET' at 0xdfe5d300 Table 'APIC' at 0xdfe5d400 MADT: Found table at 0xdfe5d400 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 bios32: Found BIOS32 Service Directory header at 0xc00ffa00 bios32: Entry = 0xffa10 (c00ffa10) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xa8b6 pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xfbb10 00024 (v2 DELL ) ACPI: XSDT 0xdfe5d200 0005C (v1 DELL M08 27D80A1E ASL 00000061) ACPI: FACP 0xdfe5d09c 000F4 (v4 DELL M08 27D80A1E ASL 00000061) ACPI: DSDT 0xdfe5d800 0614C (v2 INT430 SYSFexxx 00001001 INTL 20050624) ACPI: FACS 0xdfe6c000 00040 ACPI: HPET 0xdfe5d300 00038 (v1 DELL M08 00000001 ASL 00000061) ACPI: APIC 0xdfe5d400 00068 (v1 DELL M08 27D80A1E ASL 00000047) ACPI: ASF! 0xdfe5d000 0007E (v32 DELL M08 27D80A1E ASL 00000061) ACPI: MCFG 0xdfe5d3c0 0003E (v16 DELL M08 27D80A1E ASL 00000061) ACPI: TCPA 0xdfe5d700 00032 (v1 00000000 ASL 00000000) ACPI: SSDT 0xdfe5b97a 004CC (v1 PmRef CpuPm 00003000 INTL 20050624) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: random: nfslock: pseudo-device io: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 npx0: INT 16 interface acpi0: on motherboard PCIe: Memory Mapped configuration base @ 0xf8000000 pcibios: BIOS version 2.10 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.VID_.IGDP -> bus 0 dev 2 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.MCHP -> bus 0 dev 0 func 0 ACPI: SSDT 0xdfe6c080 00043 (v1 LMPWR DELLLOM 00001001 INTL 20050624) acpi0: wakeup code va 0xc7079000 pa 0x1000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 acpi0: reservation of 0, 9f000 (3) failed acpi0: reservation of 100000, dfd5a800 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 9 10 11 Validation 0 255 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 5 7 Validation 0 255 N 0 5 7 After Disable 0 255 N 0 5 7 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 9 10 11 Validation 0 10 N 0 9 10 11 After Disable 0 255 N 0 9 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 5 7 9 10 11 Validation 0 9 N 0 5 7 9 10 11 After Disable 0 255 N 0 5 7 9 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a00, revid=0x0c domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a01, revid=0x0c domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2834, revid=0x02 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x6f20, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2835, revid=0x02 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x6f00, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x283a, revid=0x02 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfed1c400, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 22 found-> vendor=0x8086, dev=0x284b, revid=0x02 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf6ffc000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 21 found-> vendor=0x8086, dev=0x283f, revid=0x02 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2841, revid=0x02 domain=0, bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2849, revid=0x02 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2830, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x6f80, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2831, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type I/O Port, range 32, base 0x6f60, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2832, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 map[20]: type I/O Port, range 32, base 0x6f40, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2836, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfed1c000, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x2448, revid=0xf2 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2815, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x02 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[20]: type I/O Port, range 32, base 0x6fa0, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2828, revid=0x02 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x6eb0, size 3, enabled map[14]: type I/O Port, range 32, base 0x6eb8, size 2, enabled map[18]: type I/O Port, range 32, base 0x6ec0, size 3, enabled map[1c]: type I/O Port, range 32, base 0x6ec8, size 2, enabled map[20]: type I/O Port, range 32, base 0x6ee0, size 4, enabled map[24]: type I/O Port, range 32, base 0xeff0, size 4, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x283e, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=3 map[10]: type Memory, range 32, base 0xf6ffbf00, size 8, enabled map[20]: type I/O Port, range 32, base 0x10c0, size 5, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 17 pcib1: at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xf2000000-0xf6efffff pcib1: prefetched decode 0xe0000000-0xefffffff pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x042b, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xf5000000, size 24, enabled pcib1: requested memory range 0xf5000000-0xf5ffffff: good map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled pcib1: requested memory range 0xe0000000-0xefffffff: good map[1c]: type Memory, range 64, base 0xf2000000, size 25, enabled pcib1: requested memory range 0xf2000000-0xf3ffffff: good map[24]: type I/O Port, range 32, base 0xdf00, size 7, enabled pcib1: requested I/O range 0xdf00-0xdf7f: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: port 0xdf00-0xdf7f mem 0xf5000000-0xf5ffffff,0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1 uhci0: port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f20 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49 uhci0: [MPSAFE] uhci0: [ITHREAD] uhci0: LegSup = 0x0f00 usbus0: on uhci0 uhci1: port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f00 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50 uhci1: [MPSAFE] uhci1: [ITHREAD] uhci1: LegSup = 0x0f00 usbus1: on uhci1 ehci0: mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c400 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: on ehci0 pci0: at device 27.0 (no driver attached) pcib2: at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 11 pcib2: subordinate bus 11 pcib2: I/O decode 0xf000-0xfff pcib2: no prefetched decode pci11: on pcib2 pci11: domain=0, physical bus=11 pcib3: at device 28.1 on pci0 pcib3: domain 0 pcib3: secondary bus 12 pcib3: subordinate bus 12 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xf1f00000-0xf1ffffff pcib3: no prefetched decode pci12: on pcib3 pci12: domain=0, physical bus=12 found-> vendor=0x8086, dev=0x4229, revid=0x61 domain=0, bus=12, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf1ffe000, size 13, enabled pcib3: requested memory range 0xf1ffe000-0xf1ffffff: good pcib3: matched entry for 12.0.INTA pcib3: slot 0 INTA hardwired to IRQ 17 pci12: at device 0.0 (no driver attached) pcib4: at device 28.5 on pci0 pcib4: domain 0 pcib4: secondary bus 9 pcib4: subordinate bus 9 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xf1e00000-0xf1efffff pcib4: no prefetched decode pci9: on pcib4 pci9: domain=0, physical bus=9 found-> vendor=0x14e4, dev=0x1673, revid=0x02 domain=0, bus=9, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 3 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xf1ef0000, size 16, enabled pcib4: requested memory range 0xf1ef0000-0xf1efffff: good pcib4: matched entry for 9.0.INTA pcib4: slot 0 INTA hardwired to IRQ 17 bge0: mem 0xf1ef0000-0xf1efffff irq 17 at device 0.0 on pci9 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf1ef0000 bge0: adjust device control 0x2000 -> 0x5000 bge0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 52 bge0: using IRQ 256 for MSI bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E bge0: Disabling fastboot bge0: Disabling fastboot miibus0: on bge0 brgphy0: PHY 1 on miibus0 brgphy0: OUI 0x0050ef, model 0x000c, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:21:70:bd:9c:b2 bge0: [MPSAFE] bge0: [ITHREAD] uhci2: port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f80 uhci2: [MPSAFE] uhci2: [ITHREAD] uhci2: LegSup = 0x0f00 usbus3: on uhci2 uhci3: port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f60 uhci3: [MPSAFE] uhci3: [ITHREAD] uhci3: LegSup = 0x0f00 usbus4: on uhci3 uhci4: port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0 uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f40 uhci4: [MPSAFE] uhci4: [ITHREAD] uhci4: LegSup = 0x0f00 usbus5: on uhci4 ehci1: mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0 ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c000 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus6: EHCI version 1.0 usbus6: on ehci1 pcib5: at device 30.0 on pci0 pcib5: domain 0 pcib5: secondary bus 3 pcib5: subordinate bus 4 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xf1d00000-0xf1dfffff pcib5: no prefetched decode pcib5: Subtractively decoded bridge. pci3: on pcib5 pci3: domain=0, physical bus=3 found-> vendor=0x1217, dev=0x7135, revid=0x21 domain=0, bus=3, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, memory disabled found-> vendor=0x1217, dev=0x00f7, revid=0x02 domain=0, bus=3, slot=1, func=4 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xf1dff000, size 12, enabled pcib5: requested memory range 0xf1dff000-0xf1dfffff: good map[14]: type Memory, range 32, base 0xf1dfe800, size 11, enabled pcib5: requested memory range 0xf1dfe800-0xf1dfefff: good pcib5: matched entry for 3.1.INTA pcib5: slot 1 INTA hardwired to IRQ 19 cbb0: at device 1.0 on pci3 pcib5: cbb0 requested memory range 0x0-0xffffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xe0700000 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0700000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib5: matched entry for 3.1.INTA pcib5: slot 1 INTA hardwired to IRQ 19 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53 cbb0: [MPSAFE] cbb0: [FILTER] cbb0: Bad Vcc requested cbb0: PCI Configuration space: 0x00: 0x71351217 0x04100007 0x06070021 0x00824000 0x10: 0xe0700000 0x020000a0 0x20040403 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x04c00113 0x40: 0x01f91028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x00000000 0x90: 0x00052405 0x00000000 0x00000000 0x00000000 0xa0: 0xfe020001 0x00c04000 0x00000015 0x0000000a 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x09004100 0x80e203ea 0x00000000 0x10400118 0xe0: 0x00820000 0x00000000 0x83000004 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=1217, dev=f7 fwohci0: vendor=1217, dev=f7 fwohci0: <1394 Open Host Controller Interface> mem 0xf1dff000-0xf1dfffff,0xf1dfe800-0xf1dfefff irq 19 at device 1.4 on pci3 fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf1dff000 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 48:4f:c0:00:3a:12:10:90 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x1700000 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 4a:4f:c0:12:10:90 fwe0: bpf attached fwe0: Ethernet address: 4a:4f:c0:12:10:90 fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 48:4f:c0:00:3a:12:10:90 @ 0xfffe00000000, S400, maxrec 2048 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6fa0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x10000 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54 ata0: [MPSAFE] ata0: [ITHREAD] atapci1: port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eef,0xeff0-0xefff irq 18 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6ee0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 55 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xeff0 ata2: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x6eb0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x6eb8 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x6ec0 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x6ec8 ata3: reset tp1 mask=00 ostat0=ff ostat1=ff ata3: [MPSAFE] ata3: [ITHREAD] pci0: at device 31.3 (no driver attached) acpi_lid0: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 acpi_acad0: on acpi0 battery0: on acpi0 battery1: on acpi0 acpi_tz0: on acpi0 psmcpnp0: irq 12 on acpi0 atkbdc0: port 0x60,0x64,0x62,0x66 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:0065 psm0: irq 12 on atkbdc0 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 57 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 atrtc0: port 0x70-0x71,0x72-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 58 uart0: [FILTER] uart0: fast interrupt cpu0: on acpi0 ACPI: SSDT 0xdfe5c4b0 002C8 (v1 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 0xdfe5be46 005E5 (v1 PmRef Cpu0Cst 00003001 INTL 20050624) est0: on cpu0 est0: Invalid id16 (set, cur) = (3368, 3106) est0: Invalid freq 2401, ignored. est0: Invalid id16 (set, cur) = (34831, 1559) est0: Invalid freq 800, ignored. p4tcc0: on cpu0 cpu1: on acpi0 ACPI: SSDT 0xdfe5c778 000C4 (v1 PmRef Cpu1Ist 00003000 INTL 20050624) ACPI: SSDT 0xdfe5c42b 00085 (v1 PmRef Cpu1Cst 00003000 INTL 20050624) est1: on cpu1 est1: Invalid id16 (set, cur) = (3368, 3106) est1: Invalid freq 2401, ignored. est1: Invalid id16 (set, cur) = (34831, 1559) est1: Invalid freq 800, ignored. p4tcc1: on cpu1 unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 0: ioport 0xc00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it uart: uart0 already exists; skipping it isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xccfff,0xcd000-0xcffff pnpid ORM0000 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata1 failed to probe at port 0x170 irq 15 on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port not found. ppc0: failed to probe at irq 7 on isa0 uart1: failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 230320 -> 100000 procfs registered lapic: Divisor 2, Frequency 99750482 hz Timecounter "TSC" frequency 2394011472 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata0: Identifying devices: 00010000firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 ata0: New devices: 00010000 md0: Preloaded image 4423680 bytes at 0xc0f6dfe0 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start ugen0.1: at usbus0 uhub0: on usbus0 ugen1.1: at usbus1 uhub1: on usbus1 ugen2.1: at usbus2 uhub2: on usbus2 ugen3.1: at usbus3 uhub3: on usbus3 ugen4.1: at usbus4 uhub4: on usbus4 ugen5.1: at usbus5 uhub5: on usbus5 ugen6.1: at usbus6 uhub6: on usbus6 battery0: battery initialization done, tried 1 times battery1: battery initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on ICH8M chip acd0: setting UDMA33 on ICH8M chip acd0: DVDR drive at ata0 as master acd0: read 4134KB/s (4134KB/s) write 1722KB/s (1722KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-RW 120mm data disc ata2: Identifying devices: 00000001 ata2: New devices: 00000001 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire ad4: 152627MB at ata2-master SATA300 ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3: Identifying devices: 00000000 ata3: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48 ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 49 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 51 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 52 uhub2: 4 ports with 4 removable, self powered uhub6: 6 ports with 6 removable, self powered GEOM: new disk ad4 ugen5.2: at usbus5 uhub7: on usbus5 Trying to mount root from ufs:/dev/md0 ct_to_ts([2009-12-09 13:24:46]) = 1260365086.000000000 start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /rescue/init start_init: trying /stand/sysinstall uhub7: 4 ports with 3 removable, self powered ugen5.3: at usbus5 battery1: battery initialization failed, giving up