Date: Sun, 18 Sep 2016 09:34:52 -0400 From: Tyler Stachecki <stachecki.tyler@gmail.com> To: freebsd-x11@freebsd.org Subject: Haswell GPU and/or display issues? Message-ID: <CAC6wqPV3HMHOEs%2BUN_eX34U1j=G69aTwT=z9ynojUPg08SJOvA@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
I am currently giving FreeBSD 11 RC3 a test drive and can't get X11 to
play ball.
At first, Xorg reported that it couldn't find a display. I found that
only Haswell GT1 and GT2 PCI IDs are present, so I added a PCI ID
entry for my GPU (Haswell GT3). I assume it's supported and just
missing entries?
After adding PCI IDs for my GPU (Haswell GT3 mobile/Iris 5100), I was
able to get the kernel to get drm to start spitting out some output.
However, when running 'X -configure' or 'X -config', my display blacks
out and becomes unresponsive. The display remains unresponsive even
when I try to drop back to a VTY with ctrl+alt+fX.
I noticed the bug in the wiki regarding resolutions above Full HD and
have tried lowering my resolution to 1080p or lower to no avail.
Any suggestions?
Tyler
dmesg:
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RC3 #0 r305893: Fri Sep 16 23:08:26 EDT 2016
root@green:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on
LLVM 3.8.0)
VT(efifb): resolution 2560x1440
CPU: Intel(R) Core(TM) i7-4558U CPU @ 2.80GHz (2793.59-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended
Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8143638528 (7766 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <_ASUS_ Notebook>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101c950, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
cryptosoft0: <software crypto> on motherboard
acpi0: <_ASUS_ Notebook> on motherboard
acpi_ec0: <Embedded Controller: GPE 0xa, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem
0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7d1c000-0xf7d1ffff at
device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem
0xf7d00000-0xf7d0ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf7d18000-0xf7d1bfff
at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
iwm0: <Intel Dual Band Wireless AC 7260> mem 0xf7c00000-0xf7c01fff at
device 0.0 on pci2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port
0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f
mem 0xf7d22000-0xf7d227ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
usbus0: 5.0Gbps Super Speed USB v3.0
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek (0x0282) HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek (0x0282) Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek (0x0282) (Internal Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek (0x0282) (Left Analog Headphones)> at nid 33 on hdaa1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0: <SanDisk SD6SP1M128G1002 X231202> ATA8-ACS SATA 3.x device
ada0: Serial Number 135072403833
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <SanDisk SD6SP1M128G1002 X231202> ATA8-ACS SATA 3.x device
ada1: Serial Number 135072400937
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 122104MB (250069680 512 byte sectors)
uhub0: 13 ports with 13 removable, self powered
iwm0: hw rev 0x140, fw ver 16.242414.0, address 7c:7a:91:3c:42:ae
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1396797208 Hz quality 1000
Trying to mount root from ufs:/dev/ada0p2 [rw]...
WARNING: / was not properly dismounted
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.2: <vendor 0x8087> at usbus0
wlan0: Ethernet address: 7c:7a:91:3c:42:ae
ugen0.3: <SunplusIT INC.> at usbus0
ugen0.4: <Atmel> at usbus0
hid_get_item: Number of items(256) truncated to 255
iwm0: iwm_update_edca: called
iwm0: iwm_update_edca: called
wlan0: link state changed to UP
ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr
1> on usbus0
hid_get_item: Number of items(256) truncated to 255
hid_get_item: Number of items(256) truncated to 255
uhid0: <Atmel maXTouch Digitizer> on usbus0
hid_get_item: Number of items(256) truncated to 255
hid_get_item: Number of items(256) truncated to 255
hid_get_item: Number of items(256) truncated to 255
uhid1: <Atmel maXTouch Control> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
wlan0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 4 0 0 done
All buffers synced.
Uptime: 1m28s
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-RC3 #1 r305893: Sun Sep 18 12:22:45 EDT 2016
root@green:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on
LLVM 3.8.0)
VT(efifb): resolution 2560x1440
CPU: Intel(R) Core(TM) i7-4558U CPU @ 2.80GHz (2793.59-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended
Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8143638528 (7766 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <_ASUS_ Notebook>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39 on motherboard
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8101c950, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
cryptosoft0: <software crypto> on motherboard
acpi0: <_ASUS_ Notebook> on motherboard
acpi_ec0: <Embedded Controller: GPE 0xa, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem
0xf7800000-0xf7bfffff,0xe0000000-0xefffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7d1c000-0xf7d1ffff at
device 3.0 on pci0
xhci0: <Intel Panther Point USB 3.0 controller> mem
0xf7d00000-0xf7d0ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf7d18000-0xf7d1bfff
at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib2
iwm0: <Intel Dual Band Wireless AC 7260> mem 0xf7c00000-0xf7c01fff at
device 0.0 on pci2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port
0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f
mem 0xf7d22000-0xf7d227ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
usbus0: 5.0Gbps Super Speed USB v3.0
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek (0x0282) HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek (0x0282) Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek (0x0282) (Internal Analog)> at nid 20 and 18 on hdaa1
pcm2: <Realtek (0x0282) (Left Analog Headphones)> at nid 33 on hdaa1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ugen0.1: <0x8086> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0: <SanDisk SD6SP1M128G1002 X231202> ATA8-ACS SATA 3.x device
ada0: Serial Number 135072403833
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <SanDisk SD6SP1M128G1002 X231202> ATA8-ACS SATA 3.x device
ada1: Serial Number 135072400937
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 122104MB (250069680 512 byte sectors)
uhub0: 13 ports with 13 removable, self powered
iwm0: hw rev 0x140, fw ver 16.242414.0, address 7c:7a:91:3c:42:ae
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1396795846 Hz quality 1000
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
wlan0: Ethernet address: 7c:7a:91:3c:42:ae
usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
iwm0: iwm_update_edca: called
iwm0: iwm_update_edca: called
wlan0: link state changed to UP
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 2 failed,
USB_ERR_TIMEOUT
ugen0.2: <Unknown> at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
ugen0.2: <SunplusIT INC.> at usbus0
ugen0.3: <Atmel> at usbus0
hid_get_item: Number of items(256) truncated to 255
hid_get_item: Number of items(256) truncated to 255
uhid0: <Atmel maXTouch Digitizer> on usbus0
hid_get_item: Number of items(256) truncated to 255
hid_get_item: Number of items(256) truncated to 255
hid_get_item: Number of items(256) truncated to 255
uhid1: <Atmel maXTouch Control> on usbus0
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Intel Haswell (ULT GT3 mobile)> on vgapci0
info: [drm] Memory usable by graphics device = 2048M
info: [drm] MTRR allocation failed. Graphics performance may suffer.
iicbus0: <Philips I2C bus>error: [drm:pid843:i915_write32] *ERROR*
Unknown unclaimed register before writing to c5100
on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0x0
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0x0
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0x0
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0xe0000000-0xf0000000
info: [drm] Connector eDP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.eDP-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-2
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DP-2
info: [drm] - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "efifb" with new "fb".
drmn0: More than 8 outputs detected
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Xorg log:
[ 23.410]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[ 23.410] X Protocol Version 11, Revision 0
[ 23.410] Build Operating System: FreeBSD 11.0-RC2 amd64
[ 23.410] Current Operating System: FreeBSD green 11.0-RC3 FreeBSD
11.0-RC3 #1 r305893: Sun Sep 18 12:22:45 EDT 2016
root@green:/usr/obj/usr/src/sys/GENERIC amd64
[ 23.410] Build Date: 13 September 2016 07:19:21PM
[ 23.410]
[ 23.410] Current version of pixman: 0.34.0
[ 23.410] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.410] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.410] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 18
12:35:10 2016
[ 23.412] (II) Loader magic: 0x8112f0
[ 23.412] (II) Module ABI versions:
[ 23.412] X.Org ANSI C Emulation: 0.4
[ 23.412] X.Org Video Driver: 19.0
[ 23.412] X.Org XInput driver : 21.0
[ 23.412] X.Org Server Extension : 9.0
[ 23.412] (--) PCI:*(0:0:2:0) 8086:0a2e:1043:13bd rev 9, Mem @
0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @
0x????????/65536
[ 23.413] (==) Using default built-in configuration (30 lines)
[ 23.413] (==) --- Start of built-in configuration ---
[ 23.413] Section "Device"
[ 23.413] Identifier "Builtin Default intel Device 0"
[ 23.413] Driver "intel"
[ 23.413] EndSection
[ 23.413] Section "Screen"
[ 23.413] Identifier "Builtin Default intel Screen 0"
[ 23.413] Device "Builtin Default intel Device 0"
[ 23.413] EndSection
[ 23.413] Section "Device"
[ 23.413] Identifier "Builtin Default fbdev Device 0"
[ 23.413] Driver "fbdev"
[ 23.413] EndSection
[ 23.413] Section "Screen"
[ 23.413] Identifier "Builtin Default fbdev Screen 0"
[ 23.413] Device "Builtin Default fbdev Device 0"
[ 23.413] EndSection
[ 23.413] Section "Device"
[ 23.413] Identifier "Builtin Default vesa Device 0"
[ 23.413] Driver "vesa"
[ 23.413] EndSection
[ 23.413] Section "Screen"
[ 23.413] Identifier "Builtin Default vesa Screen 0"
[ 23.413] Device "Builtin Default vesa Device 0"
[ 23.413] EndSection
[ 23.413] Section "ServerLayout"
[ 23.413] Identifier "Builtin Default Layout"
[ 23.413] Screen "Builtin Default intel Screen 0"
[ 23.413] Screen "Builtin Default fbdev Screen 0"
[ 23.413] Screen "Builtin Default vesa Screen 0"
[ 23.413] EndSection
[ 23.413] (==) --- End of built-in configuration ---
[ 23.413] (==) ServerLayout "Builtin Default Layout"
[ 23.413] (**) |-->Screen "Builtin Default intel Screen 0" (0)
[ 23.413] (**) | |-->Monitor "<default monitor>"
[ 23.413] (**) | |-->Device "Builtin Default intel Device 0"
[ 23.413] (==) No monitor specified for screen "Builtin Default
intel Screen 0".
Using a default monitor configuration.
[ 23.413] (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
[ 23.413] (**) | |-->Monitor "<default monitor>"
[ 23.413] (**) | |-->Device "Builtin Default fbdev Device 0"
[ 23.413] (==) No monitor specified for screen "Builtin Default
fbdev Screen 0".
Using a default monitor configuration.
[ 23.413] (**) |-->Screen "Builtin Default vesa Screen 0" (2)
[ 23.413] (**) | |-->Monitor "<default monitor>"
[ 23.414] (**) | |-->Device "Builtin Default vesa Device 0"
[ 23.414] (==) No monitor specified for screen "Builtin Default
vesa Screen 0".
Using a default monitor configuration.
[ 23.414] (==) Automatically adding devices
[ 23.414] (==) Automatically enabling devices
[ 23.414] (==) Not automatically adding GPU devices
[ 23.414] (WW) The directory "/usr/local/share/fonts/misc/" does not exist.
[ 23.414] Entry deleted from font path.
[ 23.415] (WW) The directory "/usr/local/share/fonts/Type1/" does not exist.
[ 23.415] Entry deleted from font path.
[ 23.415] (WW) The directory "/usr/local/share/fonts/100dpi/" does not exist.
[ 23.415] Entry deleted from font path.
[ 23.415] (WW) The directory "/usr/local/share/fonts/75dpi/" does not exist.
[ 23.415] Entry deleted from font path.
[ 23.415] (==) FontPath set to:
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/
[ 23.415] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 23.415] (II) The server relies on devd to provide the list of
input devices.
If no devices become available, reconfigure devd or disable AutoAddDevices.
[ 23.415] (II) LoadModule: "glx"
[ 23.416] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 23.426] (II) Module glx: vendor="X.Org Foundation"
[ 23.426] compiled for 1.17.4, module version = 1.0.0
[ 23.427] ABI class: X.Org Server Extension, version 9.0
[ 23.427] (==) AIGLX enabled
[ 23.427] (II) LoadModule: "intel"
[ 23.427] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 23.430] (II) Module intel: vendor="X.Org Foundation"
[ 23.430] compiled for 1.17.4, module version = 2.21.15
[ 23.430] Module class: X.Org Video Driver
[ 23.430] ABI class: X.Org Video Driver, version 19.0
[ 23.430] (II) LoadModule: "fbdev"
[ 23.431] (WW) Warning, couldn't open module fbdev
[ 23.431] (II) UnloadModule: "fbdev"
[ 23.431] (II) Unloading fbdev
[ 23.431] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.431] (II) LoadModule: "vesa"
[ 23.431] (WW) Warning, couldn't open module vesa
[ 23.431] (II) UnloadModule: "vesa"
[ 23.431] (II) Unloading vesa
[ 23.431] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 23.431] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 23.452] (--) Using syscons driver with X support (version 16777218.0)
[ 23.452] (--) using VT number 9
[ 25.516] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 25.516] (II) intel(0): Creating default Display subsection in
Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
[ 25.516] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 25.516] (==) intel(0): RGB weight 888
[ 25.516] (==) intel(0): Default visual is TrueColor
[ 25.516] (--) intel(0): Integrated Graphics Chipset: Intel(R)
Iris(TM) Graphics 5100
[ 25.516] (**) intel(0): Relaxed fencing enabled
[ 25.516] (**) intel(0): Wait on SwapBuffers? enabled
[ 25.516] (**) intel(0): Triple buffering? enabled
[ 25.516] (**) intel(0): Framebuffer tiled
[ 25.516] (**) intel(0): Pixmaps tiled
[ 25.516] (**) intel(0): 3D buffers tiled
[ 25.516] (**) intel(0): SwapBuffers wait enabled
[ 25.516] (==) intel(0): video overlay key set to 0x101fe
[ 25.516] (II) intel(0): Output eDP1 has no monitor section
[ 25.521] (II) intel(0): Output HDMI1 has no monitor section
[ 25.530] (II) intel(0): Output DP1 has no monitor section
[ 25.535] (II) intel(0): Output HDMI2 has no monitor section
[ 25.544] (II) intel(0): Output DP2 has no monitor section
[ 25.545] (II) intel(0): EDID for output eDP1
[ 25.545] (II) intel(0): Manufacturer: SHP Model: 1406 Serial#: 0
[ 25.545] (II) intel(0): Year: 2013 Week: 0
[ 25.545] (II) intel(0): EDID Version: 1.4
[ 25.545] (II) intel(0): Digital Display Input
[ 25.545] (II) intel(0): 8 bits per channel
[ 25.545] (II) intel(0): Digital interface is DisplayPort
[ 25.545] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 17
[ 25.545] (II) intel(0): Gamma: 2.20
[ 25.545] (II) intel(0): No DPMS capabilities specified
[ 25.545] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 25.545] (II) intel(0): Default color space is primary color space
[ 25.545] (II) intel(0): First detailed timing is preferred mode
[ 25.545] (II) intel(0): Preferred mode is native pixel format and
refresh rate
[ 25.545] (II) intel(0): redX: 0.640 redY: 0.329 greenX: 0.300
greenY: 0.600
[ 25.545] (II) intel(0): blueX: 0.149 blueY: 0.060 whiteX: 0.312
whiteY: 0.328
[ 25.545] (II) intel(0): Manufacturer's mask: 0
[ 25.545] (II) intel(0): Supported detailed timing:
[ 25.545] (II) intel(0): clock: 241.5 MHz Image Size: 294 x 165 mm
[ 25.545] (II) intel(0): h_active: 2560 h_sync: 2608 h_sync_end
2640 h_blank_end 2720 h_border: 0
[ 25.545] (II) intel(0): v_active: 1440 v_sync: 1443 v_sync_end
1448 v_blanking: 1481 v_border: 0
[ 25.545] (II) intel(0): Monitor name: LQ133T1JW14
[ 25.545] (II) intel(0): EDID (in hex):
[ 25.545] (II) intel(0): 00ffffffffffff004d10061400000000
[ 25.545] (II) intel(0): 00170104a51d117806de50a3544c9926
[ 25.545] (II) intel(0): 0f505400000001010101010101010101
[ 25.545] (II) intel(0): 010101010101565e00a0a0a029503020
[ 25.545] (II) intel(0): 350026a5100000180000001000000000
[ 25.545] (II) intel(0): 00000000000000000000000000100000
[ 25.545] (II) intel(0): 000000000000000000000000000000fc
[ 25.545] (II) intel(0): 004c5131333354314a5731340a2000a5
[ 25.545] (II) intel(0): Not using default mode "320x240"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "400x300"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "400x300"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "512x384"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "640x480"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "640x512"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "800x600"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "896x672"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "928x696"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "960x720"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "700x525"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Not using default mode "1024x768"
(doublescan mode not supported)
[ 25.545] (II) intel(0): Printing probed modes for output eDP1
[ 25.545] (II) intel(0): Modeline "2560x1440"x60.0 241.50 2560
2608 2640 2720 1440 1443 1448 1481 -hsync -vsync (88.8 kHz eP)
[ 25.545] (II) intel(0): Modeline "1920x1440"x60.0 234.00 1920
2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[ 25.545] (II) intel(0): Modeline "1856x1392"x60.0 218.30 1856
1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[ 25.545] (II) intel(0): Modeline "1792x1344"x60.0 204.80 1792
1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[ 25.545] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600
1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[ 25.545] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400
1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 25.545] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 25.545] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280
1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 25.545] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024
1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 25.545] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 25.545] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824
896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 25.545] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 25.550] (II) intel(0): EDID for output HDMI1
[ 25.559] (II) intel(0): EDID for output DP1
[ 25.564] (II) intel(0): EDID for output HDMI2
[ 25.573] (II) intel(0): EDID for output DP2
[ 25.573] (II) intel(0): Output eDP1 connected
[ 25.573] (II) intel(0): Output HDMI1 disconnected
[ 25.573] (II) intel(0): Output DP1 disconnected
[ 25.573] (II) intel(0): Output HDMI2 disconnected
[ 25.573] (II) intel(0): Output DP2 disconnected
[ 25.573] (II) intel(0): Using exact sizes for initial modes
[ 25.573] (II) intel(0): Output eDP1 using initial mode 2560x1440
[ 25.573] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[ 25.573] (II) intel(0): Kernel page flipping support detected, enabling
[ 25.573] (==) intel(0): DPI set to (96, 96)
[ 25.573] (II) Loading sub module "fb"
[ 25.573] (II) LoadModule: "fb"
[ 25.573] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 25.575] (II) Module fb: vendor="X.Org Foundation"
[ 25.575] compiled for 1.17.4, module version = 1.0.0
[ 25.575] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.575] (II) Loading sub module "dri2"
[ 25.575] (II) LoadModule: "dri2"
[ 25.575] (II) Module "dri2" already built-in
[ 25.575] (==) Depth 24 pixmap format is 32 bpp
[ 25.575] (II) intel(0): [DRI2] Setup complete
[ 25.575] (II) intel(0): [DRI2] DRI driver: i965
[ 25.575] (II) intel(0): Allocated new frame buffer 2560x1440
stride 10240, tiled
[ 25.578] (II) UXA(0): Driver registered support for the following
operations:
[ 25.578] (II) solid
[ 25.578] (II) copy
[ 25.578] (II) composite (RENDER acceleration)
[ 25.578] (II) put_image
[ 25.578] (II) get_image
[ 25.578] (==) intel(0): Backing store enabled
[ 25.578] (==) intel(0): Silken mouse enabled
[ 25.579] (II) intel(0): Initializing HW Cursor
[ 25.579] (II) intel(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 25.580] (==) intel(0): DPMS enabled
[ 25.580] (==) intel(0): Intel XvMC decoder enabled
[ 25.580] (II) intel(0): Set up textured video
[ 25.580] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 25.580] (II) intel(0): direct rendering: DRI2 Enabled
[ 27.468] (--) RandR disabled
[ 27.500] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 27.500] (II) AIGLX: enabled GLX_ARB_create_context
[ 27.500] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 27.500] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 27.500] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 27.500] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 27.500] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 27.500] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 27.500] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 27.500] (II) AIGLX: Loaded and initialized i965
[ 27.500] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 27.500] (II) intel(0): Setting screen physical size to 677 x 381
[ 27.532] (II) config/devd: probing input devices...
[ 27.532] (II) config/devd: adding input device (null) (/dev/kbdmux)
[ 27.532] (II) LoadModule: "kbd"
[ 27.532] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 27.532] (II) Module kbd: vendor="X.Org Foundation"
[ 27.532] compiled for 1.17.4, module version = 1.8.1
[ 27.532] Module class: X.Org XInput Driver
[ 27.532] ABI class: X.Org XInput driver, version 21.0
[ 27.532] (II) Using input driver 'kbd' for 'kbdmux'
[ 27.532] (**) kbdmux: always reports core events
[ 27.532] (**) kbdmux: always reports core events
[ 27.532] (**) Option "Protocol" "standard"
[ 27.532] (**) Option "XkbRules" "base"
[ 27.532] (**) Option "XkbModel" "pc105"
[ 27.532] (**) Option "XkbLayout" "us"
[ 27.532] (**) Option "config_info" "devd:kbdmux"
[ 27.532] (II) XINPUT: Adding extended input device "kbdmux" (type:
KEYBOARD, id 6)
[ 27.552] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
[ 27.552] (II) config/devd: adding input device (null) (/dev/sysmouse)
[ 27.552] (II) LoadModule: "mouse"
[ 27.552] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 27.553] (II) Module mouse: vendor="X.Org Foundation"
[ 27.553] compiled for 1.17.4, module version = 1.9.1
[ 27.554] Module class: X.Org XInput Driver
[ 27.554] ABI class: X.Org XInput driver, version 21.0
[ 27.554] (II) Using input driver 'mouse' for 'sysmouse'
[ 27.554] (**) sysmouse: always reports core events
[ 27.554] (**) Option "Device" "/dev/sysmouse"
[ 27.554] (==) sysmouse: Protocol: "Auto"
[ 27.554] (**) sysmouse: always reports core events
[ 27.554] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[ 27.554] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[ 27.554] (**) sysmouse: Buttons: 5
[ 27.554] (**) Option "config_info" "devd:sysmouse"
[ 27.554] (II) XINPUT: Adding extended input device "sysmouse"
(type: MOUSE, id 7)
[ 27.554] (**) sysmouse: (accel) keeping acceleration scheme 1
[ 27.554] (**) sysmouse: (accel) acceleration profile 0
[ 27.554] (**) sysmouse: (accel) acceleration factor: 2.000
[ 27.554] (**) sysmouse: (accel) acceleration threshold: 4
[ 27.554] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[ 27.554] (II) sysmouse: SetupAuto: protocol is SysMouse
[ 27.605] (II) config/devd: adding input device Mouse (/dev/psm0)
[ 27.605] (II) Using input driver 'mouse' for 'Mouse'
[ 27.605] (**) Mouse: always reports core events
[ 27.605] (**) Option "Device" "/dev/psm0"
[ 27.605] (==) Mouse: Protocol: "Auto"
[ 27.605] (**) Mouse: always reports core events
[ 27.656] (==) Mouse: Emulate3Buttons, Emulate3Timeout: 50
[ 27.656] (**) Mouse: ZAxisMapping: buttons 4 and 5
[ 27.656] (**) Mouse: Buttons: 5
[ 27.656] (**) Option "config_info" "devd:psm0"
[ 27.656] (II) XINPUT: Adding extended input device "Mouse" (type:
MOUSE, id 8)
[ 27.656] (**) Mouse: (accel) keeping acceleration scheme 1
[ 27.656] (**) Mouse: (accel) acceleration profile 0
[ 27.656] (**) Mouse: (accel) acceleration factor: 2.000
[ 27.656] (**) Mouse: (accel) acceleration threshold: 4
[ 27.672] (II) Mouse: SetupAuto: hw.iftype is 3, hw.model is 0
[ 27.672] (II) Mouse: SetupAuto: protocol is PS/2
[ 27.875] (II) Mouse: ps2EnableDataReporting: succeeded
[ 28.394] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 33.203] (WW) config/devd: devd socket is lost
[ 33.204] (EE) config/devd: fail to connect to devd
[ 33.235] (II) config/devd: terminating backend...
[ 33.235] (II) UnloadModule: "mouse"
[ 33.235] (II) UnloadModule: "mouse"
[ 33.235] (II) UnloadModule: "kbd"
[ 33.239] (II) Server terminated successfully (0). Closing log file.
pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x13bd1043 chip=0x0a048086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'Haswell-ULT DRAM Controller'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x13bd1043 chip=0x0a2e8086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'Haswell-ULT Integrated Graphics Controller'
class = display
subclass = VGA
hdac0@pci0:0:3:0: class=0x040300 card=0x20108086 chip=0x0a0c8086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'Haswell-ULT HD Audio Controller'
class = multimedia
subclass = HDA
none0@pci0:0:4:0: class=0x118000 card=0x20108086 chip=0x0a038086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = dasp
xhci0@pci0:0:20:0: class=0x0c0330 card=0x201f1043 chip=0x9c318086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series USB xHCI HC'
class = serial bus
subclass = USB
none1@pci0:0:22:0: class=0x078000 card=0x13bd1043 chip=0x9c3a8086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series HECI'
class = simple comms
hdac1@pci0:0:27:0: class=0x040300 card=0x13bd1043 chip=0x9c208086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series HD Audio Controller'
class = multimedia
subclass = HDA
pcib1@pci0:0:28:0: class=0x060400 card=0x13bd1043 chip=0x9c108086
rev=0xe4 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:3: class=0x060400 card=0x13bd1043 chip=0x9c168086
rev=0xe4 hdr=0x01
vendor = 'Intel Corporation'
device = '8 Series PCI Express Root Port 4'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x13bd1043 chip=0x9c438086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series LPC Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x13bd1043 chip=0x9c038086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series SATA Controller 1 [AHCI mode]'
class = mass storage
subclass = SATA
none2@pci0:0:31:3: class=0x0c0500 card=0x13bd1043 chip=0x9c228086
rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '8 Series SMBus Controller'
class = serial bus
subclass = SMBus
iwm0@pci0:2:0:0: class=0x028000 card=0xc0708086 chip=0x08b18086
rev=0x6b hdr=0x00
vendor = 'Intel Corporation'
device = 'Wireless 7260'
class = network
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAC6wqPV3HMHOEs%2BUN_eX34U1j=G69aTwT=z9ynojUPg08SJOvA>