From owner-freebsd-questions@FreeBSD.ORG Thu May 6 09:45:41 2004 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8118916A4CF for ; Thu, 6 May 2004 09:45:41 -0700 (PDT) Received: from srvdmz13.oekb.co.at (srvdmz13.oekb.co.at [143.245.5.103]) by mx1.FreeBSD.org (Postfix) with ESMTP id 240D343D45 for ; Thu, 6 May 2004 09:45:39 -0700 (PDT) (envelope-from Ewald.Jenisch@oekb.at) Received: from Unknown [143.245.2.191] by srvdmz13.oekb.co.at - SurfControl E-mail Filter (4.7); Thu, 06 May 2004 18:45:37 +0200 Received: from athena.oekb.co.at ([143.245.83.20]) by MAIL01.oekb.co.at with Microsoft SMTPSVC(5.0.2195.6713); Thu, 6 May 2004 18:45:36 +0200 Received: from athena.oekb.co.at (athena.oekb.co.at [127.0.0.1]) by athena.oekb.co.at (8.12.10/8.12.10) with ESMTP id i46GjZ62005591 for ; Thu, 6 May 2004 18:45:35 +0200 Received: (from ej@localhost) by athena.oekb.co.at (8.12.10/8.12.10/Submit) id i46GjZRe005590 for freebsd-questions@freebsd.org; Thu, 6 May 2004 18:45:35 +0200 Message-ID: <20040506164535.GC4351@athena.oekb.co.at> From: Ewald Jenisch To: freebsd-questions@freebsd.org Date: Thu, 6 May 2004 18:45:35 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline X-OriginalArrivalTime: 06 May 2004 16:45:36.0320 (UTC) FILETIME=[8E3E4C00:01C43389] User-Agent: Mutt/1.4.1i Subject: Stop. in installworld (4.9) X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 06 May 2004 16:45:41 -0000 Hi, Upon trying to upgrade a 4.9 system to the most recent version I ended up with a "Stop." during "make installworld". Here's what I did: cvsup ... stable-supfile cd /usr/src make buildworld make buildkernel KERNCONF=... (Kernel-config-file below) make installkernel KERNCONF=... reboot to single-mode (no errors booting with the new kernel) mergemaster -p cd /usr/src make installworld Installworld ends with a "Stop." (see below). Anybody else already seen this? What can I do against it? BTW, cvsup-ing again about an hour later didn't help. TIA for your help, -ewald PS: I'm including the full text of the error message as well as my kernel config and the /var/log/messages below. ------------------------------ < Cut here > ------------------------------ # cd /usr/src # make installworld mkdir -p /tmp/install.42 for prog in [ awk cap_mkdb cat chflags chmod chown date echo egrep find grep ln make makewhatis mkdir mtree mv pwd_mkdb rm sed sh sysctl test true uname wc zic; do cp `which $prog` /tmp/install.42; done cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj MACHINE_ARCH=i386 MACHINE=i386 OBJFORMAT_PATH=/usr/obj/usr/src/i386/usr/libexec GROFF_BIN_PATH=/usr/obj/usr/src/i386/usr/bin GROFF_FONT_PATH=/usr/obj/usr/src/i386/usr/share/groff_font GROFF_TMAC_PATH=/usr/obj/usr/src/i386/usr/share/tmac PERL5LIB=/usr/obj/usr/src/i386/usr/libdata/perl/5.00503 PATH=/usr/obj/usr/src/i386/usr/sbin:/usr/obj/usr/src/i386/usr/bin:/usr/obj/usr/src/i386/usr/games:/tmp/install.42 make -f Makefile.inc1 reinstall -------------------------------------------------------------- >>> Making hierarchy -------------------------------------------------------------- cd /usr/src; make -f Makefile.inc1 hierarchy cd /usr/src/etc; make distrib-dirs set - `grep "^[a-zA-Z]" /usr/src/etc/locale.deprecated`; while [ $# -gt 0 ] ; do for dir in /usr/share/locale /usr/share/nls /usr/local/share/nls; do test -d /${dir} && cd /${dir}; test -L "$2" && rm -rf "$2"; test \! -L "$1" && test -d "$1" && mv "$1" "$2"; done; shift; shift; done mtree -deU -f /usr/src/etc/mtree/BSD.root.dist -p / mtree -deU -f /usr/src/etc/mtree/BSD.var.dist -p /var mtree -deU -f /usr/src/etc/mtree/BSD.usr.dist -p /usr mtree -deU -f /usr/src/etc/mtree/BSD.include.dist -p /usr/include mtree -deU -f /usr/src/etc/mtree/BSD.include.dist -p /usr/libdata/perl/5.00503/mach mtree -deU -f /usr/src/etc/mtree/BSD.sendmail.dist -p / cd /; rm -f /sys; ln -s usr/src/sys sys cd /usr/share/man/en.ISO8859-1; ln -sf ../man* . cd /usr/share/man; set - `grep "^[a-zA-Z]" /usr/src/etc/man.alias`; while [ $# -gt 0 ] ; do rm -rf "$1"; ln -s "$2" "$1"; shift; shift; done cd /usr/share/locale; set - `grep "^[a-zA-Z]" /usr/src/etc/locale.alias`; while [ $# -gt 0 ] ; do rm -rf "$1"; ln -s "$2" "$1"; shift; shift; done cd /usr/share/openssl/man/en.ISO8859-1; ln -sf ../man* . cd /usr/share/nls; set - `grep "^[a-zA-Z]" /usr/src/etc/nls.alias`; while [ $# -gt 0 ] ; do rm -rf "$1"; ln -s "$2" "$1"; shift; shift; done -------------------------------------------------------------- >>> Installing everything.. -------------------------------------------------------------- cd /usr/src; make -f Makefile.inc1 install ===> share/info ===> include creating osreldate.h from newvers.sh setvar PARAMFILE /usr/src/include/../sys/sys/param.h; . /usr/src/include/../sys/conf/newvers.sh; echo "$COPYRIGHT" > osreldate.h; echo "#ifdef _KERNEL" >> osreldate.h; echo '#error "osreldate.h must not be used in the kernel, use sys/param.h"' >> osreldate.h; echo "#else" >> osreldate.h; echo \#'undef __FreeBSD_version' >> osreldate.h; echo \#'define __FreeBSD_version' $RELDATE >> osreldate.h; echo "#endif" >> osreldate.h touch: not found *** Error code 127 Stop in /usr/src/include. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. # exit Script done on Wed Jan 28 04:57:15 2004 ------------------------------ < Cut here > ------------------------------ Kernel-config-file: machine i386 # cpu I386_CPU # cpu I486_CPU # cpu I586_CPU cpu I686_CPU ident EJ maxusers 0 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O device isa device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device ahd # AHA39320/29320 and onboard AIC79xx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family device mpt # LSI-Logic MPT/Fusion device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets) options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured device adv0 at isa? device adw device bt0 at isa? device aha0 at isa? device aic0 at isa? device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID device dpt # DPT Smartcache - See LINT for options! device iir # Intel Integrated RAID device mly # Mylex AcceleRAID/eXtremeRAID device ciss # Compaq SmartRAID 5* series device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers device aac # Adaptec FSA RAID, Dell PERC2/PERC3 #device aacp # SCSI passthrough for aac (requires CAM) device ida # Compaq Smart RAID device amr # AMI MegaRAID device mlx # Mylex DAC960 family device pst # Promise Supertrak SX6000 device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device agp # support several AGP chipsets # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 NICs device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device ste # Sundance ST201 (D-Link DFE-550TX) device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') device bge # Broadcom BCM570x (``Tigon III'') # ISA Ethernet NICs. # 'device ed' requires 'device miibus' device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 device ex device ep device fe0 at isa? disable port 0x300 # Xircom Ethernet device xe # PRISM I IEEE 802.11b wireless NIC. device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. device an # The probe order of these is presently determined by i386/isa/isa_compat.c. device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000 device lnc0 at isa? disable port 0x280 irq 10 drq 0 device cs0 at isa? disable port 0x300 device sn0 at isa? disable port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device urio # Diamond Rio MP3 Player # USB Ethernet, requires mii device aue # ADMtek USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet # FireWire support device firewire # FireWire bus code device sbp # SCSI over FireWire (Requires scbus and da) device fwe # Ethernet over FireWire (non-standard!) ------------------------------ < Cut here > ------------------------------ Jan 28 03:57:32 io /kernel: 0x000f0011, at 0xfec02000 Jan 28 03:57:32 io /kernel: io3 (APIC): apic id: 5, version: 0x000f0011, at 0xfec03000 Jan 28 03:57:32 io /kernel: Preloaded elf kernel "kernel" at 0xc0561000. Jan 28 03:57:32 io /kernel: Warning: Pentium 4 CPU: PSE disabled Jan 28 03:57:32 io /kernel: Pentium Pro MTRR support enabled Jan 28 03:57:32 io /kernel: md0: Malloc disk Jan 28 03:57:32 io /kernel: npx0: on motherboard Jan 28 03:57:32 io /kernel: npx0: INT 16 interface Jan 28 03:57:33 io /kernel: pcib0: on motherboard Jan 28 03:57:33 io /kernel: pci0: on pcib0 Jan 28 03:57:33 io /kernel: pci0: at 3.0 Jan 28 03:57:33 io /kernel: ciss0: port 0x2800-0x28ff mem 0xf5df0000-0xf5df3fff,0xf5f80000-0xf5fbffff irq 3 at device 4.0 on pci0 Jan 28 03:57:33 io /kernel: pci0: (vendor=0x0e11, dev=0xb203) at 5.0 irq 5 Jan 28 03:57:33 io /kernel: pci0: (vendor=0x0e11, dev=0xb204) at 5.2 irq 7 Jan 28 03:57:33 io /kernel: isab0: at device 15.0 on pci0 Jan 28 03:57:33 io /kernel: isa0: on isab0 Jan 28 03:57:33 io /kernel: atapci0: port 0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 Jan 28 03:57:33 io /kernel: ata0: at 0x1f0 irq 14 on atapci0 Jan 28 03:57:33 io /kernel: ata1: at 0x170 irq 15 on atapci0 Jan 28 03:57:33 io /kernel: ohci0: mem 0xf5e70000-0xf5e70fff irq 10 at device 15.2 on pci0 Jan 28 03:57:33 io /kernel: usb0: OHCI version 1.0, legacy support Jan 28 03:57:33 io /kernel: usb0: SMM does not respond, resetting Jan 28 03:57:33 io /kernel: usb0: on ohci0 Jan 28 03:57:33 io /kernel: usb0: USB revision 1.0 Jan 28 03:57:33 io /kernel: uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jan 28 03:57:33 io /kernel: uhub0: 4 ports with 4 removable, self powered Jan 28 03:57:33 io /kernel: pcib1: on motherboard Jan 28 03:57:33 io /kernel: pci1: on pcib1 Jan 28 03:57:33 io /kernel: bge0: mem 0xf7ef0000-0xf7efffff irq 11 at device 2.0 on pci1 Jan 28 03:57:33 io /kernel: bge0: Ethernet address: 00:0f:20:79:1c:c3 Jan 28 03:57:33 io /kernel: miibus0: on bge0 Jan 28 03:57:33 io /kernel: brgphy0: on miibus0 Jan 28 03:57:33 io /kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto Jan 28 03:57:33 io /kernel: pcib2: on motherboard Jan 28 03:57:33 io /kernel: pci2: on pcib2 Jan 28 03:57:33 io /kernel: pcib3: on motherboard Jan 28 03:57:33 io /kernel: pci3: on pcib3 Jan 28 03:57:33 io /kernel: pcib4: on motherboard Jan 28 03:57:33 io /kernel: pci4: on pcib4 Jan 28 03:57:33 io /kernel: bge1: mem 0xf7ff0000-0xf7ffffff irq 15 at device 2.0 on pci4 Jan 28 03:57:33 io /kernel: bge1: Ethernet address: 00:0f:20:79:1c:c5 Jan 28 03:57:33 io /kernel: miibus1: on bge1 Jan 28 03:57:33 io /kernel: brgphy1: on miibus1 Jan 28 03:57:33 io /kernel: brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto Jan 28 03:57:33 io /kernel: pcib5: on motherboard Jan 28 03:57:33 io /kernel: pci5: on pcib5 Jan 28 03:57:33 io /kernel: eisa0: on motherboard Jan 28 03:57:33 io /kernel: mainboard0: on eisa0 slot 0 Jan 28 03:57:33 io /kernel: eisa0: unknown card AHC0000 (0x05030000) at slot 2 Jan 28 03:57:33 io /kernel: orm0: