Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 21 May 2001 15:02:05 -0400
From:      Mike Tancsa <mike@sentex.net>
To:        Jamie Norwood <mistwolf@mushhaven.net>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: fxp drivers
Message-ID:  <4.2.2.20010521150021.02b1b660@192.168.0.12>
In-Reply-To: <20010521123627.A15855@mushhaven.net>
References:  <4.2.2.20010521092907.02be8be0@192.168.0.12> <20010521082959.A4184@mushhaven.net> <4.2.2.20010521092907.02be8be0@192.168.0.12>

next in thread | previous in thread | raw e-mail | index | archive | help

My _guess_ is that it will work just fine.  But if you need to cvsup to the 
present STABLE, and are worried, you can always use the existing drivers by 
adjusting the appropriate lines in /usr/src/sys/conf/files

         ---Mike

At 12:36 PM 5/21/2001 -0400, Jamie Norwood wrote:
>On Mon, May 21, 2001 at 09:30:50AM -0400, Mike Tancsa wrote:
>
>Not sure, since I have no access to the card from here. Here is the dmesg
>entry from the last reboot:
>
>Apr 20 14:59:37 diarmadhi /kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet> 
>port
>0xef40-0xef5f mem 0xff900000-0xff9fffff,0xfebff000-0xfebfffff irq 11 at 
>device 1
>9.0 on pci0
>Apr 20 14:59:37 diarmadhi /kernel: fxp0: Ethernet address 00:a0:c9:86:67:73
>
>People with non-MII cards were seeing problems a week or two ago, mostly that
>the cards would not come up, IIRC. Just want to know it is sade before I bite
>my bullet.
>
>Jamie

--------------------------------------------------------------------
Mike Tancsa,                          	          tel +1 519 651 3400
Network Administration,     			  mike@sentex.net
Sentex Communications                 		  www.sentex.net
Cambridge, Ontario Canada			  www.sentex.net/mike


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.2.2.20010521150021.02b1b660>