Date: Mon, 08 Jan 2024 11:28:57 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 276198] bsdconfig - can't setup network interface using "default" option Message-ID: <bug-276198-227@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D276198 Bug ID: 276198 Summary: bsdconfig - can't setup network interface using "default" option Product: Base System Version: 13.2-RELEASE Hardware: Any OS: Any Status: New Severity: Affects Only Me Priority: --- Component: bin Assignee: bugs@FreeBSD.org Reporter: peter.chen.devs@gmail.com Environment: FreeBSD version: 13.2-RELEASE hardware: Raspberry Pi 400 ethernet cable: cat 5e Bug Description: In bsdconfig(8), the "default" option in networking management can't setup the network interface correctly if the previous state of the network link is "no carrier" caused by unsupported option. Even using "#service netif resta= rt" won't help. Steps to Reproduce Bug: 1. In bsdconfig(8) > Networking Management > Network Interfaces > <link_n= ame> > options=20 2. Select "media 1000baseT mediaopt full-duplex,master instance 1" and br= ing up interface during confirmation. This option is not supported by Raspberry= Pi 400, so when you exit the bsdconfig(8) and type ifconfig(8), the status of <link_name> shows "no carrier". 3. Repeat step 1 but choose "default" option and bring up interface during confirmation. 4. ifconfig(8) shows the status of <link_name> to be "no carrier". The setting in "/etc/rc.conf" file for <link_name> is correct. Run "#service ne= tif restart" won't work. 5. Repeat step 1 but choose "media 100baseTX" option and bring up interfa= ce during confirmation. 6. Exit the bsdconfig(8) and use ifconfig(8) to show network interface in= fo, the status of <link_name> becomes "active". However, when you try to ping o= ther IP addresses (such as 192.168.0.1), it shows "no route to host". This bug is described in bug#276197. 7. Use service(8) with command "#service netif restart" to restart netif,= the ifconfig(8) shows the link as "active", now you are able to ping other ip addresses and connect to other hosts. 8. Now, open bsdconfig(8) again and choose "default" option. After that, ifconfig(8) shows the status is "active" and you can successfully ping / connect to other hosts. Expected Result: Changing option "media 1000baseT mediaopt full-duplex,master instance 1" = -> "default" should work, at least the network interface should work after run= ning "#service netif restart". However, it is only working by changing it follow= ing "media 1000baseT mediaopt full-duplex,master instance 1" -> "media 100baseT= X" -> "default". The issue of not setting up "media 100baseTX" after exiting bsdconfig(8) = is described by bug#276197. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-276198-227>