Date: Mon, 19 Mar 2001 05:13:10 -0800 (PST) From: Jamie Bowden <ragnar@sysabend.org> To: Warner Losh <imp@harmony.village.org> Cc: mobile@freebsd.org Subject: Re: Bummed Message-ID: <Pine.BSF.4.10.10103190457430.80548-100000@moo.sysabend.org> In-Reply-To: <200103190828.f2J8S5954660@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 19 Mar 2001, Warner Losh wrote:
:Anybody got a good laptop they can recommend? two cardbus slots are
:required, but other than that I'm torn between huge numbers of pixels
:and light weight.
I'm vey pleased with my Dell Latitude CPx. It's not the ilghtest notebook
in the world, but it's by no means the heaviest either. Everything works
under FreeBSD and it meets your two carbus slot requirement.
module_register_init: MOD_LOAD (vesa, c0215740, 0) error 6
That's the only problem I have with it, and I'm sure that is me having
left something out (or put too much in) the kernel.
Here's the dmseg:
8:00am ghast /home/jamie %dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #1: Sat Mar 17 16:01:39 EST 2001
root@ghast:/usr/src/sys/compile/ghast
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (497.84-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 127471616 (124484K bytes)
Preloaded elf kernel "kernel" at 0xc02f6000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f609c.
module_register_init: MOD_LOAD (vesa, c0215740, 0) error 6
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][FUNC pci
int + CSC serial isa irq]
pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][FUNC pci
int + CSC serial isa irq]
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x840-0x84f at
device 7.3 on pci0
pcm0: <ESS Technology Maestro-2E> port 0xd800-0xd8ff irq 5 at device 8.0
on pci0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
pcic0: <VLSI 82C146> at port 0x3e0-0x3e1 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pccard: card inserted, slot 0
pccard: card inserted, slot 1
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33
xe0 at port 0x240-0x24f iomem 0xd0000-0xd0fff irq 9 slot 0 on pccard0
xe0: Intel CE3, bonding version 0x45, 100Mbps capable
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:a0:c9:bc:3e:b4
sio1 at port 0x3e8-0x3ef irq 3 slot 1 on pccard1
sio1: type 16550A
Mine's a CPxH, but the CPxJ is pretty much identical with a 650 instead of
a 500. Screen is 1024x768 14.1" TFT. Mouse is both eraser and touchpad.
Memory is upgradable to 256MB, I also have: cd-rom, zip100, 1.44mb floppy,
and ls-120 bay modules. They all work fine (of course, FreeBSD doesn't
support switching them on the fly. Bummer that).
Overall, I am very pleased with it. FreeBSD, Win98, WinNT, W2k, and Linux
all have run fine on this thing (though I can't personally vouch for
Linux, I know people who can).
Jamie Bowden
--
"It was half way to Rivendell when the drugs began to take hold"
Hunter S Tolkien "Fear and Loathing in Barad Dur"
Iain Bowen <alaric@alaric.org.uk>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10103190457430.80548-100000>