Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 11 Feb 2008 15:09:15 +0900
From:      Pyun YongHyeon <pyunyh@gmail.com>
To:        Milan Obuch <freebsd-current@dino.sk>
Cc:        freebsd-current@freebsd.org
Subject:   Re: CFT: vr(4)
Message-ID:  <20080211060915.GI2317@cdnetworks.co.kr>
In-Reply-To: <200802051540.01916.freebsd-current@dino.sk>
References:  <20080204022334.GC27999@cdnetworks.co.kr> <200802051540.01916.freebsd-current@dino.sk>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Feb 05, 2008 at 03:40:01PM +0100, Milan Obuch wrote:
 > On Monday 04 February 2008, Pyun YongHyeon wrote:
 > > Dear all,
 > >
 > > Here is overhauled vr(4) that shall address all known issues. PR
 > > database showed vr(4) is not stable enough under high load and
 > > link state handling didn't work as expected as well as its poor
 > > performance. I've tried hard to fix the bugs reported in PR
 > > database for several months. It tooked more time than I had
 > > planned when I received donated hardware.
 > > vr(4) will now
 > >  - work on all architectures.
 > >  - have better Rx performance.
 > >  - have more robust error recovery.
 > >  - reliably detect link state changes.
 > >  - support 32bit perfect multicast filtering for VT6105M.
 > >  - support WOL.
 > >
 > > It seems that the overhauled vr(4) runs well under my limited test
 > > environments. Several users already reported success. Because there
 > > are three kinds of Rhine family and lots of variants for the
 > > hardware, I'd like to hear feedback from users priror to commit.
 > > You can get the latest vr(4) at the following URL.
 > >
 > > http://people.freebsd.org/~yongari/vr/if_vr.c
 > > http://people.freebsd.org/~yongari/vr/if_vrreg.h
 > >
 > > I wouldn't be available for 7 ~ 10 days from Feb 5, so please don't
 > > expect quick reply.
 > 
 > Hi,
 > 
 > did anybody test Routerboard 44? It is quad network card, uses VT6105M chips 
 > as network controller (Via) and PCI6152 as PCI-PCI bridge (PLX Technology). 
 > With both stock if_vr and modified from site given above it partially works - 
 > interfaces are created, ifconfig works, but even pinging some host in local 
 > network (I achieve the effect with ping -f in a minue or so) hangs system. 
 > Nothing on my console, nothing in system log. Only hard powerdown restores 
 > system in functioning state.
 > 
 > I tested it with stock vr driver in both 6 and 7 stable on both i386 and 
 > amd64, and now with overhauled vr in 8 freshly cvsupped and two files 
 > replaced on i386.
 > 
 > If anybody has any idea or some patches I could test, I will.
 > 

I have tested 4-port Rhine III(6105LOM) and I never seen this hangs.
Does this also happen on other network interface too?
When the system hangs, would you break into DDB and show me
the output of 'show alllocks' and 'ps'?

 > Regards,
 > Milan
 > 
 > This is on console after kldload if_vr:
 > 
 > Feb  5 14:36:29 tix kernel: vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 
 > 0x9c00-0x9cff mem 0xfceff000-0xfceff0ff irq 17 at device 8.0 on pci3
 > Feb  5 14:36:29 tix kernel: vr0: Quirks: 0x6
 > Feb  5 14:36:29 tix kernel: vr0: Revision: 0x96
 > Feb  5 14:36:29 tix kernel: miibus1: <MII bus> on vr0
 > Feb  5 14:36:29 tix kernel: ukphy0: <Generic IEEE 802.3u media interface> PHY 
 > 1 on miibus1
 > Feb  5 14:36:29 tix kernel: ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 
 > 100baseTX-FDX, auto
 > Feb  5 14:36:29 tix kernel: vr0: Ethernet address: 00:0c:42:02:38:a8
 > Feb  5 14:36:29 tix kernel: vr0: [ITHREAD]
 > Feb  5 14:36:29 tix kernel: vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 
 > 0x9800-0x98ff mem 0xfcefe000-0xfcefe0ff irq 18 at device 9.0 on pci3
 > Feb  5 14:36:29 tix kernel: vr1: Quirks: 0x6
 > Feb  5 14:36:29 tix kernel: vr1: Revision: 0x96
 > Feb  5 14:36:29 tix kernel: miibus2: <MII bus> on vr1
 > Feb  5 14:36:29 tix kernel: ukphy1: <Generic IEEE 802.3u media interface> PHY 
 > 1 on miibus2
 > Feb  5 14:36:29 tix kernel: ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 
 > 100baseTX-FDX, auto
 > Feb  5 14:36:29 tix kernel: vr1: Ethernet address: 00:0c:42:02:38:a9
 > Feb  5 14:36:29 tix kernel: vr1: [ITHREAD]
 > Feb  5 14:36:29 tix kernel: vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 
 > 0x9400-0x94ff mem 0xfcefd000-0xfcefd0ff irq 19 at device 10.0 on pci3
 > Feb  5 14:36:29 tix kernel: vr2: Quirks: 0x6
 > Feb  5 14:36:29 tix kernel: vr2: Revision: 0x96
 > Feb  5 14:36:29 tix kernel: miibus3: <MII bus> on vr2
 > Feb  5 14:36:29 tix kernel: ukphy2: <Generic IEEE 802.3u media interface> PHY 
 > 1 on miibus3
 > Feb  5 14:36:29 tix kernel: ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 
 > 100baseTX-FDX, auto
 > Feb  5 14:36:29 tix kernel: vr2: Ethernet address: 00:0c:42:02:38:aa
 > Feb  5 14:36:29 tix kernel: vr2: [ITHREAD]
 > Feb  5 14:36:29 tix kernel: vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 
 > 0x9000-0x90ff mem 0xfcefc000-0xfcefc0ff irq 16 at device 11.0 on pci3
 > Feb  5 14:36:29 tix kernel: vr3: Quirks: 0x6
 > Feb  5 14:36:29 tix kernel: vr3: Revision: 0x96
 > Feb  5 14:36:29 tix kernel: miibus4: <MII bus> on vr3
 > Feb  5 14:36:29 tix kernel: ukphy3: <Generic IEEE 802.3u media interface> PHY 
 > 1 on miibus4
 > Feb  5 14:36:29 tix kernel: ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 
 > 100baseTX-FDX, auto
 > Feb  5 14:36:29 tix kernel: vr3: Ethernet address: 00:0c:42:02:38:ab
 > Feb  5 14:36:29 tix kernel: vr3: [ITHREAD]
 > Feb  5 14:36:29 tix kernel: vr0: link state changed to DOWN
 > Feb  5 14:36:29 tix kernel: vr1: link state changed to DOWN
 > Feb  5 14:36:29 tix kernel: vr2: link state changed to DOWN
 > Feb  5 14:36:29 tix kernel: vr3: link state changed to DOWN
 > 

-- 
Regards,
Pyun YongHyeon



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080211060915.GI2317>