Date: Thu, 28 Aug 2014 14:38:26 -0400 From: Mike Tancsa <mike@sentex.net> To: FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Subject: controller errors from RELENG_9 to RELENG_10 upgrade Message-ID: <53FF7722.2010309@sentex.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I upgraded one of our file servers to RELENG_10 this AM and noticed the box started throwing a lot of errors all of a sudden on different disks and port multipliers. The disks do not have any errors according to smartctl. Now zfs detected write errors and forced a scrub on ada6 Any idea how to track this down ? dmesg and the errors attached in the txt file. loader is simple and is the same from before. hint.siis.0.msi=1 siis.0.msi=1 hw.em.enable_msix=0 ---Mike -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/ [-- Attachment #2 --] Aug 28 10:20:26 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:20:26 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:20:26 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:20:26 backup3 kernel: siisch3: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:20:27 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:20:27 backup3 kernel: siisch3: siis_timeout is 00060002 ss e0000000 rs 60000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:20:27 backup3 kernel: siisch3: ... waiting for slots 20000000 Aug 28 10:20:27 backup3 kernel: (ada6:siisch3:0:1:0): WRITE_FPDMA_QUEUED. ACB: 61 56 47 ba 00 40 a6 00 00 00 00 00 Aug 28 10:20:27 backup3 kernel: (ada6:siisch3:0:1:0): CAM status: ATA Status Error Aug 28 10:20:27 backup3 kernel: (ada6:siisch3:0:1:0): ATA status: 00 () Aug 28 10:20:27 backup3 kernel: (ada6:siisch3:0:1:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Aug 28 10:20:27 backup3 kernel: (ada6:siisch3:0:1:0): Retrying command Aug 28 10:20:57 backup3 kernel: siisch3: Timeout on slot 29 Aug 28 10:20:57 backup3 kernel: siisch3: siis_timeout is 00060002 ss e0000000 rs 60000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:20:57 backup3 kernel: siisch3: ... waiting for slots 40000000 Aug 28 10:20:58 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:20:58 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:21:00 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:21:00 backup3 kernel: siisch1: siis_timeout is 00060002 ss f8000000 rs 48000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:21:00 backup3 kernel: siisch1: ... waiting for slots 08000000 Aug 28 10:22:31 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:22:31 backup3 kernel: siisch3: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:22:31 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:22:31 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:22:31 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:22:31 backup3 kernel: siisch3: siis_timeout is 00000000 ss 40000000 rs 40000000 es 00000000 sts 801f2000 serr 00000000 Aug 28 10:23:02 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:23:02 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:23:02 backup3 kernel: siisch0: Timeout on slot 30 Aug 28 10:23:02 backup3 kernel: siisch0: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:23:04 backup3 kernel: siisch0: Timeout on slot 30 Aug 28 10:23:04 backup3 kernel: siisch0: siis_timeout is 00060002 ss f8000000 rs 48000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:23:04 backup3 kernel: siisch0: ... waiting for slots 08000000 Aug 28 10:23:34 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:23:34 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:23:34 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:23:34 backup3 kernel: siisch3: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:23:34 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:23:34 backup3 kernel: siisch1: siis_timeout is 00000000 ss 40000000 rs 40000000 es 00000000 sts 801f2000 serr 00000000 Aug 28 10:24:05 backup3 kernel: siisch0: Timeout on slot 30 Aug 28 10:24:05 backup3 kernel: siisch0: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:24:06 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:24:06 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:24:07 backup3 kernel: siisch0: Timeout on slot 26 Aug 28 10:24:07 backup3 kernel: siisch0: siis_timeout is 00060002 ss fe000000 rs 56000000 es 00000001 sts 001a2000 serr 00000000 Aug 28 10:24:07 backup3 kernel: siisch0: ... waiting for slots 52000000 Aug 28 10:24:37 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:24:37 backup3 kernel: siisch3: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:24:37 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:24:37 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:25:09 backup3 kernel: siisch1: Timeout on slot 29 Aug 28 10:25:09 backup3 kernel: siisch1: siis_timeout is 00060002 ss e0000000 rs 60000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:25:09 backup3 kernel: siisch1: ... waiting for slots 40000000 Aug 28 10:25:09 backup3 kernel: siisch1: Timeout on slot 29 Aug 28 10:25:09 backup3 kernel: siisch1: siis_timeout is 00060002 ss e0000000 rs 20000000 es 00000001 sts 001d2000 serr 00000000 Aug 28 10:25:41 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:25:41 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:25:41 backup3 kernel: siisch0: Timeout on slot 30 Aug 28 10:25:41 backup3 kernel: siisch0: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:26:12 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:26:12 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:26:13 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:26:13 backup3 kernel: siisch3: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:26:44 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:26:44 backup3 kernel: siisch3: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:26:44 backup3 kernel: siisch0: Timeout on slot 29 Aug 28 10:26:44 backup3 kernel: siisch0: siis_timeout is 00060002 ss e0000000 rs 60000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:26:44 backup3 kernel: siisch0: ... waiting for slots 40000000 Aug 28 10:26:44 backup3 kernel: siisch0: Timeout on slot 30 Aug 28 10:26:44 backup3 kernel: siisch0: siis_timeout is 00060002 ss e0000000 rs 60000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:26:45 backup3 kernel: siisch1: Timeout on slot 29 Aug 28 10:26:45 backup3 kernel: siisch1: siis_timeout is 00060002 ss e0000000 rs 60000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:26:45 backup3 kernel: siisch1: ... waiting for slots 40000000 Aug 28 10:27:15 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:27:15 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:27:17 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:27:17 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:27:47 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:27:47 backup3 kernel: siisch3: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:27:47 backup3 kernel: siisch0: Timeout on slot 29 Aug 28 10:27:47 backup3 kernel: siisch0: siis_timeout is 00060002 ss e0000000 rs 20000000 es 00000001 sts 001d2000 serr 00000000 Aug 28 10:27:48 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:27:48 backup3 kernel: siisch1: siis_timeout is 00060002 ss fc000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): READ_FPDMA_QUEUED. ACB: 60 10 10 86 e0 40 e8 00 00 00 00 00 Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): CAM status: ATA Status Error Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): ATA status: 00 () Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): Retrying command Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): READ_FPDMA_QUEUED. ACB: 60 10 10 84 e0 40 e8 00 00 00 00 00 Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): CAM status: ATA Status Error Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): ATA status: 00 () Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): Retrying command Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): READ_FPDMA_QUEUED. ACB: 60 10 10 02 00 40 00 00 00 00 00 00 Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): CAM status: ATA Status Error Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): ATA status: 00 () Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Aug 28 10:27:48 backup3 kernel: (ada1:siisch1:0:1:0): Retrying command Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): READ_FPDMA_QUEUED. ACB: 60 10 10 86 e0 40 e8 00 00 00 00 00 Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): CAM status: ATA Status Error Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): ATA status: 00 () Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): Retrying command Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): READ_FPDMA_QUEUED. ACB: 60 10 10 84 e0 40 e8 00 00 00 00 00 Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): CAM status: ATA Status Error Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): ATA status: 00 () Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): Retrying command Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): WRITE_FPDMA_QUEUED. ACB: 61 01 4c fe 02 40 b4 00 00 00 00 00 Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): CAM status: ATA Status Error Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): ATA status: 00 () Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): Retrying command Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): READ_FPDMA_QUEUED. ACB: 60 10 10 02 00 40 00 00 00 00 00 00 Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): CAM status: ATA Status Error Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): ATA status: 00 () Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Aug 28 10:27:49 backup3 kernel: (ada15:siisch0:0:2:0): Retrying command Aug 28 10:28:50 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:28:50 backup3 kernel: siisch3: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:28:50 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:28:50 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:28:51 backup3 kernel: siisch0: Timeout on slot 30 Aug 28 10:28:51 backup3 kernel: siisch0: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:28:51 backup3 kernel: siisch3: Timeout on slot 29 Aug 28 10:28:51 backup3 kernel: siisch3: siis_timeout is 00060002 ss fa000000 rs 32000000 es 00000001 sts 001d2000 serr 00000000 Aug 28 10:28:51 backup3 kernel: siisch3: ... waiting for slots 12000000 Aug 28 10:28:51 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:28:51 backup3 kernel: siisch1: siis_timeout is 00070003 ss d0000000 rs 78000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:28:51 backup3 kernel: siisch1: ... waiting for slots 38000000 Aug 28 10:29:21 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:29:21 backup3 kernel: siisch3: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:29:21 backup3 kernel: siisch1: Timeout on slot 30 Aug 28 10:29:21 backup3 kernel: siisch1: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 Aug 28 10:29:52 backup3 kernel: siisch3: Timeout on slot 30 Aug 28 10:29:52 backup3 kernel: siisch3: siis_timeout is 00060002 ss c0000000 rs 40000000 es 00000001 sts 001e2000 serr 00000000 # camcontrol devlist <WDC WD2001FASS-00U0B0 01.00101> at scbus0 target 0 lun 0 (pass20,ada13) <WDC WD2001FASS-00U0B0 01.00101> at scbus0 target 1 lun 0 (pass19,ada12) <WDC WD2001FASS-00U0B0 01.00101> at scbus0 target 2 lun 0 (pass21,ada14) <WDC WD2001FASS-00U0B0 01.00101> at scbus0 target 3 lun 0 (pass22,ada15) <Port Multiplier 47261095 1f06> at scbus0 target 15 lun 0 (pmp2,pass18) <WDC WD2002FAEX-007BA0 05.01D05> at scbus1 target 0 lun 0 (ada0,pass0) <WDC WD2002FAEX-007BA0 05.01D05> at scbus1 target 1 lun 0 (ada1,pass1) <WDC WD2002FAEX-007BA0 05.01D05> at scbus1 target 2 lun 0 (ada2,pass2) <WDC WD2002FAEX-00MJRA0 01.01L01> at scbus1 target 3 lun 0 (ada3,pass3) <Port Multiplier 38261095 1706> at scbus1 target 15 lun 0 (pass4,pmp0) <WDC WD2002FAEX-007BA0 05.01D05> at scbus3 target 0 lun 0 (ada4,pass5) <WDC WD2002FAEX-007BA0 05.01D05> at scbus3 target 1 lun 0 (ada5,pass6) <WDC WD2002FAEX-007BA0 05.01D05> at scbus3 target 3 lun 0 (ada6,pass7) <WDC WD2002FAEX-007BA0 05.01D05> at scbus3 target 4 lun 0 (ada7,pass8) <Port Multiplier 37261095 1706> at scbus3 target 15 lun 0 (pass9,pmp1) <Areca usrvar R001> at scbus4 target 0 lun 0 (pass10,da0) <Areca backup1 R001> at scbus4 target 0 lun 1 (pass11,da1) <Areca RAID controller R001> at scbus4 target 16 lun 0 (pass12) <AMCC 9650SE-2LP DISK 4.10> at scbus5 target 0 lun 0 (pass13,da2) <WDC WD1002FAEX-00Y9A0 05.01D05> at scbus6 target 0 lun 0 (ada8,pass14) <WDC WD1002FAEX-00Y9A0 05.01D05> at scbus7 target 0 lun 0 (ada9,pass15) <ST31000340AS SD1A> at scbus8 target 0 lun 0 (ada10,pass16) <WDC WD1002FAEX-00Z3A0 05.01D05> at scbus11 target 0 lun 0 (ada11,pass17) # smartctl -a /dev/ada15 smartctl 6.3 2014-07-26 r3976 [FreeBSD 10.1-PRERELEASE amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black Device Model: WDC WD2001FASS-00U0B0 Serial Number: WD-WMAUR0387259 LU WWN Device Id: 5 0014ee 6aab7b9ff Firmware Version: 01.00101 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu Aug 28 11:06:51 2014 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (30900) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 353) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 073 040 021 Pre-fail Always - 13375 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 17 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 053 053 000 Old_age Always - 34868 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 13 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 11 193 Load_Cycle_Count 0x0032 134 134 000 Old_age Always - 200141 194 Temperature_Celsius 0x0022 111 105 000 Old_age Always - 41 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. # zpool status pool: zbackup1 state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub in progress since Thu Aug 28 10:45:05 2014 470G scanned out of 21.5T at 209M/s, 29h23m to go 0 repaired, 2.13% done config: NAME STATE READ WRITE CKSUM zbackup1 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 diskid/DISK-WD-WCAW32276692 ONLINE 0 0 0 diskid/DISK-WD-WCATR4427343 ONLINE 0 0 0 diskid/DISK-WD-WCAW34265973 ONLINE 0 0 0 diskid/DISK-9QJ2TS3S ONLINE 0 0 0 raidz1-1 ONLINE 0 0 0 diskid/DISK-WD-WMAUR0331605 ONLINE 0 0 0 diskid/DISK-WD-WMAUR0378509 ONLINE 0 0 0 diskid/DISK-WD-WMAUR0327696 ONLINE 0 0 0 diskid/DISK-WD-WMAUR0387259 ONLINE 0 0 0 raidz1-2 ONLINE 0 0 0 ada3 ONLINE 0 0 0 ada0 ONLINE 0 0 0 ada2 ONLINE 0 0 0 ada1 ONLINE 0 0 0 raidz1-3 ONLINE 0 1 0 diskid/DISK-WD-WMAWP0079293 ONLINE 0 0 0 diskid/DISK-WD-WMAY03510311 ONLINE 0 0 0 diskid/DISK-WD-WMAWP0126093 ONLINE 0 1 0 diskid/DISK-WD-WMAWP0203774 ONLINE 3 125 0 # smartctl -x /dev/ada6 smartctl 6.3 2014-07-26 r3976 [FreeBSD 10.1-PRERELEASE amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Black Device Model: WDC WD2002FAEX-007BA0 Serial Number: WD-WMAWP0203774 LU WWN Device Id: 5 0014ee 3aab9dd74 Firmware Version: 05.01D05 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Aug 28 11:24:39 2014 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (31860) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 308) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 240 3 Spin_Up_Time POS--K 253 253 021 - 6716 4 Start_Stop_Count -O--CK 100 100 000 - 22 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 074 074 000 - 19049 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 20 192 Power-Off_Retract_Count -O--CK 200 200 000 - 18 193 Load_Cycle_Count -O--CK 200 200 000 - 3 194 Temperature_Celsius -O---K 112 087 000 - 40 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1498 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 39/41 Celsius Lifetime Min/Max Temperature: 0/64 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (174) Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 2985 Vendor specific Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-PRERELEASE #4 r270747: Thu Aug 28 08:54:45 EDT 2014 mdtancsa@backup3.sentex.ca:/crossbuilds/obj/10/crossbuilds/src/10/sys/GENERIC amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz (3333.36-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x20652 Family = 0x6 Model = 0x25 Stepping = 2 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x298e3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AESNI> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 12884901888 (12288 MB) avail memory = 12373966848 (11800 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL S3420GPX> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 5 ioapic0 <Version 2.0> irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 random: <Software, Yarrow> initialized acpi0: <INTEL S3420GPX> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci2 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib5 siis0: <SiI3124 SATA controller> port 0x3000-0x300f mem 0xb4408000-0xb440807f,0xb4400000-0xb4407fff irq 19 at device 0.0 on pci5 siisch0: <SIIS channel> at channel 0 on siis0 siisch1: <SIIS channel> at channel 1 on siis0 siisch2: <SIIS channel> at channel 2 on siis0 siisch3: <SIIS channel> at channel 3 on siis0 pcib6: <ACPI PCI-PCI bridge> at device 4.0 on pci2 pci6: <ACPI PCI bus> on pcib6 bge0: <HPQ 10/100/1000 Copper Based Gigabit Adapter, ASIC rev. 0x004001> mem 0xb4300000-0xb430ffff irq 16 at device 0.0 on pci6 bge0: CHIP ID 0x00004001; ASIC REV 0x04; CHIP REV 0x40; PCI-E miibus0: <MII bus> on bge0 brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:10:18:14:27:d5 pcib7: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7 pci8: <ACPI PCI bus> on pcib8 arcmsr0: <Areca SATA 3G Host Adapter RAID Controller arcmsr version 1.20.00.28 2013-09-13 > mem 0xb4200000-0xb4200fff,0xb3c00000-0xb3ffffff irq 18 at device 14.0 on pci8 Areca RAID adapter0: ARC-1210 F/W version V1.49 2010-12-02 pcib9: <ACPI PCI-PCI bridge> at device 0.2 on pci7 pci9: <ACPI PCI bus> on pcib9 em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x4040-0x405f mem 0xb4500000-0xb451ffff,0xb4525000-0xb4525fff irq 16 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: 00:15:17:ed:68:a5 ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xb4522000-0xb45223ff irq 21 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 pcib10: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci10: <ACPI PCI bus> on pcib10 pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci11: <ACPI PCI bus> on pcib11 em1: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0x2000-0x201f mem 0xb4100000-0xb411ffff,0xb4120000-0xb4123fff irq 16 at device 0.0 on pci11 em1: Using an MSI interrupt em1: Ethernet address: 00:15:17:ed:68:a4 pcib12: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 pci12: <ACPI PCI bus> on pcib12 vgapci0: <VGA-compatible display> mem 0xb2000000-0xb2ffffff,0xb3800000-0xb3803fff,0xb3000000-0xb37fffff irq 17 at device 0.0 on pci12 vgapci0: Boot video device pcib13: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci13: <ACPI PCI bus> on pcib13 3ware device driver for 9000 series storage controllers, version: 3.80.06.003 twa0: <3ware 9000 series Storage Controller> port 0x1000-0x10ff mem 0xb0000000-0xb1ffffff,0xb4000000-0xb4000fff irq 19 at device 0.0 on pci13 twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-2LP, 2 ports, Firmware FE9X 4.10.00.021, BIOS BE9X 4.08.00.003 ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xb4521000-0xb45213ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci14: <ACPI PCI bus> on pcib14 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port 0x4068-0x406f,0x4074-0x4077,0x4060-0x4067,0x4070-0x4073,0x4020-0x403f mem 0xb4520000-0xb45207ff irq 18 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 acpi_button0: <Sleep Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb000-0xcffff,0xd0000-0xd1fff,0xd3800-0xd57ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: cannot reserve I/O port range coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 (noperiph:siisch1:0:-1:ffffffff): rescan already queued (noperiph:siisch3:0:-1:ffffffff): rescan already queued Timecounters tick every 1.000 msec random: unblocking device. usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 pmp0 at siisch1 bus 0 scbus1 target 15 lun 0 pmp0: <Port Multiplier 38261095 1706> ATA-0 device pmp0: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes) pmp1 at siisch3 bus 0 scbus3 target 15 lun 0 pmp1: <Port Multiplier 37261095 1706> ATA-0 device pmp1: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes) pmp0: 5 fan-out ports pmp1: 5 fan-out ports uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 da0 at arcmsr0 bus 0 scbus4 target 0 lun 0 da0: <Areca usrvar R001> Fixed Direct Access SCSI-5 device da0: Serial Number 0000002992326304 da0: 250.000MB/s transfers (125.000MHz DT, offset 32, 16bit) da0: Command Queueing enabled da0: 76293MB (156249600 512 byte sectors: 255H 63S/T 9726C) da1 at arcmsr0 bus 0 scbus4 target 0 lun 1 da1: <Areca backup1 R001> Fixed Direct Access SCSI-5 device da1: Serial Number 0000002680492023 da1: 250.000MB/s transfers (125.000MHz DT, offset 32, 16bit) da1: Command Queueing enabled da1: 2784728MB (5703123456 512 byte sectors: 255H 63S/T 355003C) da2 at twa0 bus 0 scbus5 target 0 lun 0 da2: <AMCC 9650SE-2LP DISK 4.10> Fixed Direct Access SCSI-5 device da2: Serial Number S105182015D48400C2B2 da2: 100.000MB/s transfers da2: 66747MB (136697856 512 byte sectors: 255H 63S/T 8509C) ada0 at siisch1 bus 0 scbus1 target 0 lun 0 ada0: <WDC WD2002FAEX-007BA0 05.01D05> ATA-8 SATA 2.x device ada0: Serial Number WD-WMAY03513634 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad6 ada1 at siisch1 bus 0 scbus1 target 1 lun 0 ada1: <WDC WD2002FAEX-007BA0 05.01D05> ATA-8 SATA 2.x device ada1: Serial Number WD-WMAY03455725 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad7 ada2 at siisch1 bus 0 scbus1 target 2 lun 0 ada2: <WDC WD2002FAEX-007BA0 05.01D05> ATA-8 SATA 2.x device ada2: Serial Number WD-WMAY02759120 ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada3 at siisch1 bus 0 scbus1 target 3 lun 0 ada3: <WDC WD2002FAEX-00MJRA0 01.01L01> ATA-8 SATA 3.x device ada3: Serial Number WD-WCC1P1023355 ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada4 at siisch3 bus 0 scbus3 target 0 lun 0 ada4: <WDC WD2002FAEX-007BA0 05.01D05> ATA-8 SATA 3.x device ada4: Serial Number WD-WMAWP0079293 ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada4: Previously was known as ad10 ada5 at siisch3 bus 0 scbus3 target 1 lun 0 ada5: <WDC WD2002FAEX-007BA0 05.01D05> ATA-8 SATA 3.x device ada5: Serial Number WD-WMAY03510311 ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada5: Previously was known as ad11 ada6 at siisch3 bus 0 scbus3 target 3 lun 0 ada6: <WDC WD2002FAEX-007BA0 05.01D05> ATA-8 SATA 3.x device ada6: Serial Number WD-WMAWP0203774 ada6: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada6: Command Queueing enabled ada6: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada7 at siisch3 bus 0 scbus3 target 4 lun 0 ada7: <WDC WD2002FAEX-007BA0 05.01D05> ATA-8 SATA 3.x device ada7: Serial Number WD-WMAWP0126093 ada7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada7: Command Queueing enabled ada7: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada8 at ahcich0 bus 0 scbus6 target 0 lun 0 ada8: <WDC WD1002FAEX-00Y9A0 05.01D05> ATA-8 SATA 3.x device ada8: Serial Number WD-WCAW34265973 ada8: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada8: Command Queueing enabled ada8: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada8: Previously was known as ad12 ada9 at ahcich1 bus 0 scbus7 target 0 lun 0 ada9: <WDC WD1002FAEX-00Y9A0 05.01D05> ATA-8 SATA 3.x device ada9: Serial Number WD-WCAW32276692 ada9: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada9: Command Queueing enabled ada9: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada9: Previously was known as ad14 ada10 at ahcich2 bus 0 scbus8 target 0 lun 0 ada10: <ST31000340AS SD1A> ATA-8 SATA 2.x device ada10: Serial Number 9QJ2TS3S ada10: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada10: Command Queueing enabled ada10: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada10: Previously was known as ad16 ada11 at ahcich5 bus 0 scbus11 target 0 lun 0 ada11: <WDC WD1002FAEX-00Z3A0 05.01D05> ATA-8 SATA 3.x device ada11: Serial Number WD-WCATR4427343 ada11: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada11: Command Queueing enabled ada11: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada11: Previously was known as ad22 pass12 at arcmsr0 bus 0 scbus4 target 16 lun 0 pass12: <Areca RAID controller R001> Fixed Processor SCSI-0 device lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! lapic5: Forcing LINT1 to edge trigger SMP: AP CPU #3 Launched! lapic4: Forcing LINT1 to edge trigger SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1666680262 Hz quality 1000 uhub2: 6 ports with 6 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen1.3: <American Megatrends Inc.> at usbus1 ukbd0: <Keyboard Interface> on usbus1 kbd0 at ukbd0 ugen0.3: <American Power Conversion> at usbus0 Root mount waiting for: usbus1 usbus0 ugen1.4: <USB> at usbus1 ukbd2: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 4> on usbus1 kbd2 at ukbd2 ugen0.4: <American Power Conversion> at usbus0 Root mount waiting for: usbus0 Trying to mount root from ufs:/dev/da2s1a [rw]... pmp2 at siisch0 bus 0 scbus0 target 15 lun 0 pmp2: <Port Multiplier 47261095 1f06> ATA-0 device pmp2: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes) pmp2: 5 fan-out ports ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ada12 at siisch0 bus 0 scbus0 target 1 lun 0 ada12: <WDC WD2001FASS-00U0B0 01.00101> ATA-8 SATA 2.x device ada12: Serial Number WD-WMAUR0378509 ada12: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada12: Command Queueing enabled ada12: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada12: Previously was known as ad5 ada13 at siisch0 bus 0 scbus0 target 0 lun 0 ada13: <WDC WD2001FASS-00U0B0 01.00101> ATA-8 SATA 2.x device ada13: Serial Number WD-WMAUR0331605 ada13: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada13: Command Queueing enabled ada13: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada13: Previously was known as ad4 ada14 at siisch0 bus 0 scbus0 target 2 lun 0 ada14: <WDC WD2001FASS-00U0B0 01.00101> ATA-8 SATA 2.x device ada14: Serial Number WD-WMAUR0327696 ada14: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada14: Command Queueing enabled ada14: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada15 at siisch0 bus 0 scbus0 target 3 lun 0 ada15: <WDC WD2001FASS-00U0B0 01.00101> ATA-8 SATA 2.x device ada15: Serial Number WD-WMAUR0387259 ada15: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada15: Command Queueing enabled ada15: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ums0: <Mouse Interface> on usbus1 ums0: 3 buttons and [Z] coordinates ID=0 uhid0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 4> on usbus1 em0: link state changed to UP em1: link state changed to UP # pciconf -lvcb siis0 siis0@pci0:5:0:0: class=0x010400 card=0x71241095 chip=0x31241095 rev=0x02 hdr=0x00 vendor = 'Silicon Image, Inc.' device = 'SiI 3124 PCI-X Serial ATA Controller' class = mass storage subclass = RAID bar [10] = type Memory, range 64, base 0xb4408000, size 128, enabled bar [18] = type Memory, range 64, base 0xb4400000, size 32768, enabled bar [20] = type I/O Port, range 32, base 0x3000, size 16, enabled cap 01[64] = powerspec 2 supports D0 D1 D2 D3 current D0 cap 07[40] = PCI-X 64-bit supports 133MHz, 2048 burst read, 12 split transactions cap 05[54] = MSI supports 1 message, 64 bit enabled with 1 message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?53FF7722.2010309>